Merge pull request 'follow 6.6.85' (#52) from follow-tmp into linux-rolling-lts-dsm232

Reviewed-on: #52
2025-03-30 16:00:12 +09:00 · 2025-03-30 16:00:12 +09:00 · 2950593576
commit 2950593576
parent e74bf03ba2 01225b2fb2
1489 changed files with 18773 additions and 11102 deletions
--- a/Documentation/admin-guide/kernel-parameters.txt
+++ b/Documentation/admin-guide/kernel-parameters.txt
@ -3287,6 +3287,11 @@

 	mga=		[HW,DRM]

+	microcode.force_minrev=	[X86]
+			Format: <bool>
+			Enable or disable the microcode minimal revision
+			enforcement for the runtime microcode loader.
+
 	min_addr=nn[KMG]	[KNL,BOOT,IA-64] All physical memory below this
 			physical address is ignored.

--- a/Documentation/arch/arm64/elf_hwcaps.rst
+++ b/Documentation/arch/arm64/elf_hwcaps.rst
@ -174,22 +174,28 @@ HWCAP2_DCPODP
    Functionality implied by ID_AA64ISAR1_EL1.DPB == 0b0010.

 HWCAP2_SVE2
-    Functionality implied by ID_AA64ZFR0_EL1.SVEVer == 0b0001.
+    Functionality implied by ID_AA64PFR0_EL1.SVE == 0b0001 and
+    ID_AA64ZFR0_EL1.SVEver == 0b0001.

 HWCAP2_SVEAES
-    Functionality implied by ID_AA64ZFR0_EL1.AES == 0b0001.
+    Functionality implied by ID_AA64PFR0_EL1.SVE == 0b0001 and
+    ID_AA64ZFR0_EL1.AES == 0b0001.

 HWCAP2_SVEPMULL
-    Functionality implied by ID_AA64ZFR0_EL1.AES == 0b0010.
+    Functionality implied by ID_AA64PFR0_EL1.SVE == 0b0001 and
+    ID_AA64ZFR0_EL1.AES == 0b0010.

 HWCAP2_SVEBITPERM
-    Functionality implied by ID_AA64ZFR0_EL1.BitPerm == 0b0001.
+    Functionality implied by ID_AA64PFR0_EL1.SVE == 0b0001 and
+    ID_AA64ZFR0_EL1.BitPerm == 0b0001.

 HWCAP2_SVESHA3
-    Functionality implied by ID_AA64ZFR0_EL1.SHA3 == 0b0001.
+    Functionality implied by ID_AA64PFR0_EL1.SVE == 0b0001 and
+    ID_AA64ZFR0_EL1.SHA3 == 0b0001.

 HWCAP2_SVESM4
-    Functionality implied by ID_AA64ZFR0_EL1.SM4 == 0b0001.
+    Functionality implied by ID_AA64PFR0_EL1.SVE == 0b0001 and
+    ID_AA64ZFR0_EL1.SM4 == 0b0001.

 HWCAP2_FLAGM2
    Functionality implied by ID_AA64ISAR0_EL1.TS == 0b0010.
@ -198,16 +204,20 @@ HWCAP2_FRINT
    Functionality implied by ID_AA64ISAR1_EL1.FRINTTS == 0b0001.

 HWCAP2_SVEI8MM
-    Functionality implied by ID_AA64ZFR0_EL1.I8MM == 0b0001.
+    Functionality implied by ID_AA64PFR0_EL1.SVE == 0b0001 and
+    ID_AA64ZFR0_EL1.I8MM == 0b0001.

 HWCAP2_SVEF32MM
-    Functionality implied by ID_AA64ZFR0_EL1.F32MM == 0b0001.
+    Functionality implied by ID_AA64PFR0_EL1.SVE == 0b0001 and
+    ID_AA64ZFR0_EL1.F32MM == 0b0001.

 HWCAP2_SVEF64MM
-    Functionality implied by ID_AA64ZFR0_EL1.F64MM == 0b0001.
+    Functionality implied by ID_AA64PFR0_EL1.SVE == 0b0001 and
+    ID_AA64ZFR0_EL1.F64MM == 0b0001.

 HWCAP2_SVEBF16
-    Functionality implied by ID_AA64ZFR0_EL1.BF16 == 0b0001.
+    Functionality implied by ID_AA64PFR0_EL1.SVE == 0b0001 and
+    ID_AA64ZFR0_EL1.BF16 == 0b0001.

 HWCAP2_I8MM
    Functionality implied by ID_AA64ISAR1_EL1.I8MM == 0b0001.
@ -273,7 +283,8 @@ HWCAP2_EBF16
    Functionality implied by ID_AA64ISAR1_EL1.BF16 == 0b0010.

 HWCAP2_SVE_EBF16
-    Functionality implied by ID_AA64ZFR0_EL1.BF16 == 0b0010.
+    Functionality implied by ID_AA64PFR0_EL1.SVE == 0b0001 and
+    ID_AA64ZFR0_EL1.BF16 == 0b0010.

 HWCAP2_CSSC
    Functionality implied by ID_AA64ISAR2_EL1.CSSC == 0b0001.
@ -282,7 +293,8 @@ HWCAP2_RPRFM
    Functionality implied by ID_AA64ISAR2_EL1.RPRFM == 0b0001.

 HWCAP2_SVE2P1
-    Functionality implied by ID_AA64ZFR0_EL1.SVEver == 0b0010.
+    Functionality implied by ID_AA64PFR0_EL1.SVE == 0b0001 and
+    ID_AA64ZFR0_EL1.SVEver == 0b0010.

 HWCAP2_SME2
    Functionality implied by ID_AA64SMFR0_EL1.SMEver == 0b0001.
--- a/Documentation/devicetree/bindings/leds/leds-class-multicolor.yaml
+++ b/Documentation/devicetree/bindings/leds/leds-class-multicolor.yaml
@ -27,7 +27,7 @@ properties:
    description: |
      For multicolor LED support this property should be defined as either
      LED_COLOR_ID_RGB or LED_COLOR_ID_MULTI which can be found in
-      include/linux/leds/common.h.
+      include/dt-bindings/leds/common.h.
    enum: [ 8, 9 ]

 required:
--- a/Documentation/devicetree/bindings/mfd/rohm,bd71815-pmic.yaml
+++ b/Documentation/devicetree/bindings/mfd/rohm,bd71815-pmic.yaml
@ -50,15 +50,15 @@ properties:
    minimum: 0
    maximum: 1

-  rohm,charger-sense-resistor-ohms:
-    minimum: 10000000
-    maximum: 50000000
+  rohm,charger-sense-resistor-micro-ohms:
+    minimum: 10000
+    maximum: 50000
    description: |
-      BD71827 and BD71828 have SAR ADC for measuring charging currents.
-      External sense resistor (RSENSE in data sheet) should be used. If
-      something other but 30MOhm resistor is used the resistance value
-      should be given here in Ohms.
-    default: 30000000
+      BD71815 has SAR ADC for measuring charging currents. External sense
+      resistor (RSENSE in data sheet) should be used. If something other
+      but a 30 mOhm resistor is used the resistance value should be given
+      here in micro Ohms.
+    default: 30000

  regulators:
    $ref: ../regulator/rohm,bd71815-regulator.yaml
@ -67,7 +67,7 @@ properties:

  gpio-reserved-ranges:
    description: |
-      Usage of BD71828 GPIO pins can be changed via OTP. This property can be
+      Usage of BD71815 GPIO pins can be changed via OTP. This property can be
      used to mark the pins which should not be configured for GPIO. Please see
      the ../gpio/gpio.txt for more information.

@ -113,7 +113,7 @@ examples:
            gpio-controller;
            #gpio-cells = <2>;

-            rohm,charger-sense-resistor-ohms = <10000000>;
+            rohm,charger-sense-resistor-micro-ohms = <10000>;

            regulators {
                buck1: buck1 {
--- a/Documentation/devicetree/bindings/mmc/mmc-controller.yaml
+++ b/Documentation/devicetree/bindings/mmc/mmc-controller.yaml
@ -25,7 +25,7 @@ properties:
  "#address-cells":
    const: 1
    description: |
-      The cell is the slot ID if a function subnode is used.
+      The cell is the SDIO function number if a function subnode is used.

  "#size-cells":
    const: 0
--- a/Documentation/devicetree/bindings/regulator/mt6315-regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/mt6315-regulator.yaml
@ -31,10 +31,6 @@ properties:
        $ref: regulator.yaml#
        unevaluatedProperties: false

-        properties:
-          regulator-compatible:
-            pattern: "^vbuck[1-4]$"
-
    additionalProperties: false

 required:
@ -52,7 +48,6 @@ examples:

      regulators {
        vbuck1 {
-          regulator-compatible = "vbuck1";
          regulator-min-microvolt = <300000>;
          regulator-max-microvolt = <1193750>;
          regulator-enable-ramp-delay = <256>;
@ -60,7 +55,6 @@ examples:
        };

        vbuck3 {
-          regulator-compatible = "vbuck3";
          regulator-min-microvolt = <300000>;
          regulator-max-microvolt = <1193750>;
          regulator-enable-ramp-delay = <256>;
--- a/Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.yaml
@ -22,7 +22,7 @@ description:
  Each sub-node is identified using the node's name, with valid values listed
  for each of the pmics below.

-  For mp5496, s1, s2
+  For mp5496, s1, s2, l2, l5

  For pm2250, s1, s2, s3, s4, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11,
  l12, l13, l14, l15, l16, l17, l18, l19, l20, l21, l22
--- a/Documentation/networking/strparser.rst
+++ b/Documentation/networking/strparser.rst
@ -112,7 +112,7 @@ Functions
 Callbacks
 =========

-There are six callbacks:
+There are seven callbacks:

    ::

@ -182,6 +182,13 @@ There are six callbacks:
    the length of the message. skb->len - offset may be greater
    then full_len since strparser does not trim the skb.

+    ::
+
+	int (*read_sock)(struct strparser *strp, read_descriptor_t *desc,
+                     sk_read_actor_t recv_actor);
+
+    The read_sock callback is used by strparser instead of
+    sock->ops->read_sock, if provided.
    ::

 	int (*read_sock_done)(struct strparser *strp, int err);
--- a/Documentation/timers/no_hz.rst
+++ b/Documentation/timers/no_hz.rst
@ -129,11 +129,8 @@ adaptive-tick CPUs:  At least one non-adaptive-tick CPU must remain
 online to handle timekeeping tasks in order to ensure that system
 calls like gettimeofday() returns accurate values on adaptive-tick CPUs.
 (This is not an issue for CONFIG_NO_HZ_IDLE=y because there are no running
-user processes to observe slight drifts in clock rate.)  Therefore, the
-boot CPU is prohibited from entering adaptive-ticks mode.  Specifying a
-"nohz_full=" mask that includes the boot CPU will result in a boot-time
-error message, and the boot CPU will be removed from the mask.  Note that
-this means that your system must have at least two CPUs in order for
+user processes to observe slight drifts in clock rate.) Note that this
+means that your system must have at least two CPUs in order for
 CONFIG_NO_HZ_FULL=y to do anything for you.

 Finally, adaptive-ticks CPUs must have their RCU callbacks offloaded.
--- a/22
+++ b/22
@ -1,7 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0
 VERSION = 6
 PATCHLEVEL = 6
-SUBLEVEL = 72
+SUBLEVEL = 85
 EXTRAVERSION =
 NAME = Pinguïn Aangedreven

@ -518,7 +518,7 @@ KGZIP		= gzip
 KBZIP2		= bzip2
 KLZOP		= lzop
 LZMA		= lzma
-LZ4		= lz4c
+LZ4		= lz4
 XZ		= xz
 ZSTD		= zstd

@ -1054,8 +1054,13 @@ LDFLAGS_vmlinux += --orphan-handling=$(CONFIG_LD_ORPHAN_WARN_LEVEL)
 endif

 # Align the bit size of userspace programs with the kernel
-KBUILD_USERCFLAGS  += $(filter -m32 -m64 --target=%, $(KBUILD_CFLAGS))
-KBUILD_USERLDFLAGS += $(filter -m32 -m64 --target=%, $(KBUILD_CFLAGS))
+KBUILD_USERCFLAGS  += $(filter -m32 -m64 --target=%, $(KBUILD_CPPFLAGS) $(KBUILD_CFLAGS))
+KBUILD_USERLDFLAGS += $(filter -m32 -m64 --target=%, $(KBUILD_CPPFLAGS) $(KBUILD_CFLAGS))
+
+# userspace programs are linked via the compiler, use the correct linker
+ifeq ($(CONFIG_CC_IS_CLANG)$(CONFIG_LD_IS_LLD),yy)
+KBUILD_USERLDFLAGS += $(call cc-option, --ld-path=$(LD))
+endif

 # make the checker run with the right architecture
 CHECKFLAGS += --arch=$(ARCH)
@ -1348,18 +1353,13 @@ ifneq ($(wildcard $(resolve_btfids_O)),)
 	$(Q)$(MAKE) -sC $(srctree)/tools/bpf/resolve_btfids O=$(resolve_btfids_O) clean
 endif

-# Clear a bunch of variables before executing the submake
-ifeq ($(quiet),silent_)
-tools_silent=s
-endif
-
 tools/: FORCE
 	$(Q)mkdir -p $(objtree)/tools
-	$(Q)$(MAKE) LDFLAGS= MAKEFLAGS="$(tools_silent) $(filter --j% -j,$(MAKEFLAGS))" O=$(abspath $(objtree)) subdir=tools -C $(srctree)/tools/
+	$(Q)$(MAKE) LDFLAGS= O=$(abspath $(objtree)) subdir=tools -C $(srctree)/tools/

 tools/%: FORCE
 	$(Q)mkdir -p $(objtree)/tools
-	$(Q)$(MAKE) LDFLAGS= MAKEFLAGS="$(tools_silent) $(filter --j% -j,$(MAKEFLAGS))" O=$(abspath $(objtree)) subdir=tools -C $(srctree)/tools/ $*
+	$(Q)$(MAKE) LDFLAGS= O=$(abspath $(objtree)) subdir=tools -C $(srctree)/tools/ $*

 # ---------------------------------------------------------------------------
 # Kernel selftest
--- a/arch/alpha/include/asm/elf.h
+++ b/arch/alpha/include/asm/elf.h
@ -74,7 +74,7 @@ typedef elf_fpreg_t elf_fpregset_t[ELF_NFPREG];
 /*
 * This is used to ensure we don't load something for the wrong architecture.
 */
-#define elf_check_arch(x) ((x)->e_machine == EM_ALPHA)
+#define elf_check_arch(x) (((x)->e_machine == EM_ALPHA) && !((x)->e_flags & EF_ALPHA_32BIT))

 /*
 * These are used to set parameters in the core dumps.
@ -139,10 +139,6 @@ extern int dump_elf_task(elf_greg_t *dest, struct task_struct *task);
 	: amask (AMASK_CIX) ? "ev6" : "ev67");	\
 })

-#define SET_PERSONALITY(EX)					\
-	set_personality(((EX).e_flags & EF_ALPHA_32BIT)		\
-	   ? PER_LINUX_32BIT : PER_LINUX)
-
 extern int alpha_l1i_cacheshape;
 extern int alpha_l1d_cacheshape;
 extern int alpha_l2_cacheshape;
--- a/arch/alpha/include/asm/pgtable.h
+++ b/arch/alpha/include/asm/pgtable.h
@ -360,7 +360,7 @@ static inline pte_t pte_swp_clear_exclusive(pte_t pte)

 extern void paging_init(void);

-/* We have our own get_unmapped_area to cope with ADDR_LIMIT_32BIT.  */
+/* We have our own get_unmapped_area */
 #define HAVE_ARCH_UNMAPPED_AREA

 #endif /* _ALPHA_PGTABLE_H */
--- a/arch/alpha/include/asm/processor.h
+++ b/arch/alpha/include/asm/processor.h
@ -8,23 +8,19 @@
 #ifndef __ASM_ALPHA_PROCESSOR_H
 #define __ASM_ALPHA_PROCESSOR_H

-#include <linux/personality.h>	/* for ADDR_LIMIT_32BIT */
-
 /*
 * We have a 42-bit user address space: 4TB user VM...
 */
 #define TASK_SIZE (0x40000000000UL)

-#define STACK_TOP \
-  (current->personality & ADDR_LIMIT_32BIT ? 0x80000000 : 0x00120000000UL)
+#define STACK_TOP (0x00120000000UL)

 #define STACK_TOP_MAX	0x00120000000UL

 /* This decides where the kernel will search for a free chunk of vm
 * space during mmap's.
 */
-#define TASK_UNMAPPED_BASE \
-  ((current->personality & ADDR_LIMIT_32BIT) ? 0x40000000 : TASK_SIZE / 2)
+#define TASK_UNMAPPED_BASE (TASK_SIZE / 2)

 /* This is dead.  Everything has been moved to thread_info.  */
 struct thread_struct { };
--- a/arch/alpha/include/uapi/asm/ptrace.h
+++ b/arch/alpha/include/uapi/asm/ptrace.h
@ -42,6 +42,8 @@ struct pt_regs {
 	unsigned long trap_a0;
 	unsigned long trap_a1;
 	unsigned long trap_a2;
+/* This makes the stack 16-byte aligned as GCC expects */
+	unsigned long __pad0;
 /* These are saved by PAL-code: */
 	unsigned long ps;
 	unsigned long pc;
--- a/arch/alpha/kernel/asm-offsets.c
+++ b/arch/alpha/kernel/asm-offsets.c
@ -34,7 +34,9 @@ void foo(void)
        DEFINE(CRED_EGID, offsetof(struct cred, egid));
        BLANK();

+	DEFINE(SP_OFF, offsetof(struct pt_regs, ps));
 	DEFINE(SIZEOF_PT_REGS, sizeof(struct pt_regs));
+	DEFINE(SWITCH_STACK_SIZE, sizeof(struct switch_stack));
 	DEFINE(PT_PTRACED, PT_PTRACED);
 	DEFINE(CLONE_VM, CLONE_VM);
 	DEFINE(CLONE_UNTRACED, CLONE_UNTRACED);
--- a/arch/alpha/kernel/entry.S
+++ b/arch/alpha/kernel/entry.S
@ -15,10 +15,6 @@
 	.set noat
 	.cfi_sections	.debug_frame

-/* Stack offsets.  */
-#define SP_OFF			184
-#define SWITCH_STACK_SIZE	64
-
 .macro	CFI_START_OSF_FRAME	func
 	.align	4
 	.globl	\func
@ -198,8 +194,8 @@ CFI_END_OSF_FRAME entArith
 CFI_START_OSF_FRAME entMM
 	SAVE_ALL
 /* save $9 - $15 so the inline exception code can manipulate them.  */
-	subq	$sp, 56, $sp
-	.cfi_adjust_cfa_offset	56
+	subq	$sp, 64, $sp
+	.cfi_adjust_cfa_offset	64
 	stq	$9, 0($sp)
 	stq	$10, 8($sp)
 	stq	$11, 16($sp)
@ -214,7 +210,7 @@ CFI_START_OSF_FRAME entMM
 	.cfi_rel_offset	$13, 32
 	.cfi_rel_offset	$14, 40
 	.cfi_rel_offset	$15, 48
-	addq	$sp, 56, $19
+	addq	$sp, 64, $19
 /* handle the fault */
 	lda	$8, 0x3fff
 	bic	$sp, $8, $8
@ -227,7 +223,7 @@ CFI_START_OSF_FRAME entMM
 	ldq	$13, 32($sp)
 	ldq	$14, 40($sp)
 	ldq	$15, 48($sp)
-	addq	$sp, 56, $sp
+	addq	$sp, 64, $sp
 	.cfi_restore	$9
 	.cfi_restore	$10
 	.cfi_restore	$11
@ -235,7 +231,7 @@ CFI_START_OSF_FRAME entMM
 	.cfi_restore	$13
 	.cfi_restore	$14
 	.cfi_restore	$15
-	.cfi_adjust_cfa_offset	-56
+	.cfi_adjust_cfa_offset	-64
 /* finish up the syscall as normal.  */
 	br	ret_from_sys_call
 CFI_END_OSF_FRAME entMM
@ -382,8 +378,8 @@ entUnaUser:
 	.cfi_restore	$0
 	.cfi_adjust_cfa_offset	-256
 	SAVE_ALL		/* setup normal kernel stack */
-	lda	$sp, -56($sp)
-	.cfi_adjust_cfa_offset	56
+	lda	$sp, -64($sp)
+	.cfi_adjust_cfa_offset	64
 	stq	$9, 0($sp)
 	stq	$10, 8($sp)
 	stq	$11, 16($sp)
@ -399,7 +395,7 @@ entUnaUser:
 	.cfi_rel_offset	$14, 40
 	.cfi_rel_offset	$15, 48
 	lda	$8, 0x3fff
-	addq	$sp, 56, $19
+	addq	$sp, 64, $19
 	bic	$sp, $8, $8
 	jsr	$26, do_entUnaUser
 	ldq	$9, 0($sp)
@ -409,7 +405,7 @@ entUnaUser:
 	ldq	$13, 32($sp)
 	ldq	$14, 40($sp)
 	ldq	$15, 48($sp)
-	lda	$sp, 56($sp)
+	lda	$sp, 64($sp)
 	.cfi_restore	$9
 	.cfi_restore	$10
 	.cfi_restore	$11
@ -417,7 +413,7 @@ entUnaUser:
 	.cfi_restore	$13
 	.cfi_restore	$14
 	.cfi_restore	$15
-	.cfi_adjust_cfa_offset	-56
+	.cfi_adjust_cfa_offset	-64
 	br	ret_from_sys_call
 CFI_END_OSF_FRAME entUna

--- a/arch/alpha/kernel/osf_sys.c
+++ b/arch/alpha/kernel/osf_sys.c
@ -1211,8 +1211,7 @@ SYSCALL_DEFINE1(old_adjtimex, struct timex32 __user *, txc_p)
 	return ret;
 }

-/* Get an address range which is currently unmapped.  Similar to the
-   generic version except that we know how to honor ADDR_LIMIT_32BIT.  */
+/* Get an address range which is currently unmapped. */

 static unsigned long
 arch_get_unmapped_area_1(unsigned long addr, unsigned long len,
@ -1234,13 +1233,7 @@ arch_get_unmapped_area(struct file *filp, unsigned long addr,
 		       unsigned long len, unsigned long pgoff,
 		       unsigned long flags)
 {
-	unsigned long limit;
-
-	/* "32 bit" actually means 31 bit, since pointers sign extend.  */
-	if (current->personality & ADDR_LIMIT_32BIT)
-		limit = 0x80000000;
-	else
-		limit = TASK_SIZE;
+	unsigned long limit = TASK_SIZE;

 	if (len > limit)
 		return -ENOMEM;
--- a/arch/alpha/kernel/traps.c
+++ b/arch/alpha/kernel/traps.c
@ -707,7 +707,7 @@ s_reg_to_mem (unsigned long s_reg)
 static int unauser_reg_offsets[32] = {
 	R(r0), R(r1), R(r2), R(r3), R(r4), R(r5), R(r6), R(r7), R(r8),
 	/* r9 ... r15 are stored in front of regs.  */
-	-56, -48, -40, -32, -24, -16, -8,
+	-64, -56, -48, -40, -32, -24, -16,	/* padding at -8 */
 	R(r16), R(r17), R(r18),
 	R(r19), R(r20), R(r21), R(r22), R(r23), R(r24), R(r25), R(r26),
 	R(r27), R(r28), R(gp),
--- a/arch/alpha/mm/fault.c
+++ b/arch/alpha/mm/fault.c
@ -78,8 +78,8 @@ __load_new_mm_context(struct mm_struct *next_mm)

 /* Macro for exception fixup code to access integer registers.  */
 #define dpf_reg(r)							\
-	(((unsigned long *)regs)[(r) <= 8 ? (r) : (r) <= 15 ? (r)-16 :	\
-				 (r) <= 18 ? (r)+10 : (r)-10])
+	(((unsigned long *)regs)[(r) <= 8 ? (r) : (r) <= 15 ? (r)-17 :	\
+				 (r) <= 18 ? (r)+11 : (r)-10])

 asmlinkage void
 do_page_fault(unsigned long address, unsigned long mmcsr,
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
@ -284,12 +284,12 @@
 &i2c11 {
 	status = "okay";
 	power-sensor@10 {
-		compatible = "adi, adm1272";
+		compatible = "adi,adm1272";
 		reg = <0x10>;
 	};

 	power-sensor@12 {
-		compatible = "adi, adm1272";
+		compatible = "adi,adm1272";
 		reg = <0x12>;
 	};

@ -454,22 +454,20 @@
 			};

 			pwm@20{
-				compatible = "max31790";
+				compatible = "maxim,max31790";
 				reg = <0x20>;
-				#address-cells = <1>;
-				#size-cells = <0>;
 			};

 			gpio@22{
 				compatible = "ti,tca6424";
 				reg = <0x22>;
+				gpio-controller;
+				#gpio-cells = <2>;
 			};

 			pwm@23{
-				compatible = "max31790";
+				compatible = "maxim,max31790";
 				reg = <0x23>;
-				#address-cells = <1>;
-				#size-cells = <0>;
 			};

 			adc@33 {
@ -504,22 +502,20 @@
 			};

 			pwm@20{
-				compatible = "max31790";
+				compatible = "maxim,max31790";
 				reg = <0x20>;
-				#address-cells = <1>;
-				#size-cells = <0>;
 			};

 			gpio@22{
 				compatible = "ti,tca6424";
 				reg = <0x22>;
+				gpio-controller;
+				#gpio-cells = <2>;
 			};

 			pwm@23{
-				compatible = "max31790";
+				compatible = "maxim,max31790";
 				reg = <0x23>;
-				#address-cells = <1>;
-				#size-cells = <0>;
 			};

 			adc@33 {
--- a/arch/arm/boot/dts/broadcom/bcm2711.dtsi
+++ b/arch/arm/boot/dts/broadcom/bcm2711.dtsi
@ -134,7 +134,7 @@
 			clocks = <&clocks BCM2835_CLOCK_UART>,
 				 <&clocks BCM2835_CLOCK_VPU>;
 			clock-names = "uartclk", "apb_pclk";
-			arm,primecell-periphid = <0x00241011>;
+			arm,primecell-periphid = <0x00341011>;
 			status = "disabled";
 		};

@ -145,7 +145,7 @@
 			clocks = <&clocks BCM2835_CLOCK_UART>,
 				 <&clocks BCM2835_CLOCK_VPU>;
 			clock-names = "uartclk", "apb_pclk";
-			arm,primecell-periphid = <0x00241011>;
+			arm,primecell-periphid = <0x00341011>;
 			status = "disabled";
 		};

@ -156,7 +156,7 @@
 			clocks = <&clocks BCM2835_CLOCK_UART>,
 				 <&clocks BCM2835_CLOCK_VPU>;
 			clock-names = "uartclk", "apb_pclk";
-			arm,primecell-periphid = <0x00241011>;
+			arm,primecell-periphid = <0x00341011>;
 			status = "disabled";
 		};

@ -167,7 +167,7 @@
 			clocks = <&clocks BCM2835_CLOCK_UART>,
 				 <&clocks BCM2835_CLOCK_VPU>;
 			clock-names = "uartclk", "apb_pclk";
-			arm,primecell-periphid = <0x00241011>;
+			arm,primecell-periphid = <0x00341011>;
 			status = "disabled";
 		};

@ -451,8 +451,6 @@
 					  IRQ_TYPE_LEVEL_LOW)>,
 			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) |
 					  IRQ_TYPE_LEVEL_LOW)>;
-		/* This only applies to the ARMv7 stub */
-		arm,cpu-registers-not-fw-configured;
 	};

 	cpus: cpus {
@ -1155,6 +1153,7 @@
 };

 &uart0 {
+	arm,primecell-periphid = <0x00341011>;
 	interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
 };

--- a/arch/arm/boot/dts/intel/socfpga/socfpga_arria10.dtsi
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_arria10.dtsi
@ -440,7 +440,7 @@
 			clocks = <&l4_mp_clk>, <&peri_emac_ptp_clk>;
 			clock-names = "stmmaceth", "ptp_ref";
 			resets = <&rst EMAC0_RESET>, <&rst EMAC0_OCP_RESET>;
-			reset-names = "stmmaceth", "ahb";
+			reset-names = "stmmaceth", "stmmaceth-ocp";
 			snps,axi-config = <&socfpga_axi_setup>;
 			status = "disabled";
 		};
@ -460,7 +460,7 @@
 			clocks = <&l4_mp_clk>, <&peri_emac_ptp_clk>;
 			clock-names = "stmmaceth", "ptp_ref";
 			resets = <&rst EMAC1_RESET>, <&rst EMAC1_OCP_RESET>;
-			reset-names = "stmmaceth", "ahb";
+			reset-names = "stmmaceth", "stmmaceth-ocp";
 			snps,axi-config = <&socfpga_axi_setup>;
 			status = "disabled";
 		};
@ -480,7 +480,7 @@
 			clocks = <&l4_mp_clk>, <&peri_emac_ptp_clk>;
 			clock-names = "stmmaceth", "ptp_ref";
 			resets = <&rst EMAC2_RESET>, <&rst EMAC2_OCP_RESET>;
-			reset-names = "stmmaceth", "ahb";
+			reset-names = "stmmaceth", "stmmaceth-ocp";
 			snps,axi-config = <&socfpga_axi_setup>;
 			status = "disabled";
 		};
--- a/arch/arm/boot/dts/mediatek/mt7623.dtsi
+++ b/arch/arm/boot/dts/mediatek/mt7623.dtsi
@ -308,7 +308,7 @@
 		clock-names = "spi", "wrap";
 	};

-	cir: cir@10013000 {
+	cir: ir-receiver@10013000 {
 		compatible = "mediatek,mt7623-cir";
 		reg = <0 0x10013000 0 0x1000>;
 		interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_LOW>;
--- a/arch/arm/boot/dts/microchip/at91-sama5d27_wlsom1_ek.dts
+++ b/arch/arm/boot/dts/microchip/at91-sama5d27_wlsom1_ek.dts
@ -197,7 +197,7 @@

 &sdmmc0 {
 	bus-width = <4>;
-	mmc-ddr-3_3v;
+	no-1-8-v;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_sdmmc0_default>;
 	status = "okay";
--- a/arch/arm/boot/dts/nxp/imx/imx6qdl-apalis.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-apalis.dtsi
@ -101,6 +101,11 @@
 		};
 	};

+	poweroff {
+		compatible = "regulator-poweroff";
+		cpu-supply = <&vgen2_reg>;
+	};
+
 	reg_module_3v3: regulator-module-3v3 {
 		compatible = "regulator-fixed";
 		regulator-always-on;
@ -220,10 +225,6 @@
 	status = "disabled";
 };

-&clks {
-	fsl,pmic-stby-poweroff;
-};
-
 /* Apalis SPI1 */
 &ecspi1 {
 	cs-gpios = <&gpio5 25 GPIO_ACTIVE_LOW>;
@ -511,7 +512,6 @@

 	pmic: pmic@8 {
 		compatible = "fsl,pfuze100";
-		fsl,pmic-stby-poweroff;
 		reg = <0x08>;

 		regulators {
--- a/arch/arm/boot/dts/st/stm32mp151.dtsi
+++ b/arch/arm/boot/dts/st/stm32mp151.dtsi
@ -1165,7 +1165,7 @@
 			reg = <0x4c001000 0x400>;
 			st,proc-id = <0>;
 			interrupts-extended =
-				<&exti 61 1>,
+				<&exti 61 IRQ_TYPE_LEVEL_HIGH>,
 				<&intc GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "rx", "tx";
 			clocks = <&rcc IPCC>;
--- a/arch/arm/boot/dts/st/stm32mp15xx-dhcom-drc02.dtsi
+++ b/arch/arm/boot/dts/st/stm32mp15xx-dhcom-drc02.dtsi
@ -6,18 +6,6 @@
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/pwm/pwm.h>

-/ {
-	aliases {
-		serial0 = &uart4;
-		serial1 = &usart3;
-		serial2 = &uart8;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-};
-
 &adc {
 	status = "disabled";
 };
--- a/arch/arm/boot/dts/st/stm32mp15xx-dhcom-pdk2.dtsi
+++ b/arch/arm/boot/dts/st/stm32mp15xx-dhcom-pdk2.dtsi
@ -7,16 +7,6 @@
 #include <dt-bindings/pwm/pwm.h>

 / {
-	aliases {
-		serial0 = &uart4;
-		serial1 = &usart3;
-		serial2 = &uart8;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
 	clk_ext_audio_codec: clock-codec {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
--- a/arch/arm/boot/dts/st/stm32mp15xx-dhcom-picoitx.dtsi
+++ b/arch/arm/boot/dts/st/stm32mp15xx-dhcom-picoitx.dtsi
@ -7,16 +7,6 @@
 #include <dt-bindings/pwm/pwm.h>

 / {
-	aliases {
-		serial0 = &uart4;
-		serial1 = &usart3;
-		serial2 = &uart8;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
 	led {
 		compatible = "gpio-leds";

--- a/arch/arm/boot/dts/st/stm32mp15xx-dhcom-som.dtsi
+++ b/arch/arm/boot/dts/st/stm32mp15xx-dhcom-som.dtsi
@ -14,6 +14,13 @@
 		ethernet1 = &ksz8851;
 		rtc0 = &hwrtc;
 		rtc1 = &rtc;
+		serial0 = &uart4;
+		serial1 = &uart8;
+		serial2 = &usart3;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
 	};

 	memory@c0000000 {
--- a/arch/arm/boot/dts/ti/omap/dra7-l4.dtsi
+++ b/arch/arm/boot/dts/ti/omap/dra7-l4.dtsi
@ -12,6 +12,7 @@
 	ranges = <0x00000000 0x4a000000 0x100000>,	/* segment 0 */
 		 <0x00100000 0x4a100000 0x100000>,	/* segment 1 */
 		 <0x00200000 0x4a200000 0x100000>;	/* segment 2 */
+	dma-ranges;

 	segment@0 {					/* 0x4a000000 */
 		compatible = "simple-pm-bus";
@ -557,6 +558,7 @@
 			 <0x0007e000 0x0017e000 0x001000>,	/* ap 124 */
 			 <0x00059000 0x00159000 0x001000>,	/* ap 125 */
 			 <0x0005a000 0x0015a000 0x001000>;	/* ap 126 */
+		dma-ranges;

 		target-module@2000 {			/* 0x4a102000, ap 27 3c.0 */
 			compatible = "ti,sysc";
--- a/arch/arm/boot/dts/ti/omap/omap3-gta04.dtsi
+++ b/arch/arm/boot/dts/ti/omap/omap3-gta04.dtsi
@ -446,6 +446,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <
 			&hsusb2_2_pins
+			&mcspi3hog_pins
 	>;

 	hsusb2_2_pins: hsusb2-2-pins {
@ -459,6 +460,15 @@
 		>;
 	};

+	mcspi3hog_pins: mcspi3hog-pins {
+		pinctrl-single,pins = <
+			OMAP3630_CORE2_IOPAD(0x25dc, PIN_OUTPUT_PULLDOWN | MUX_MODE4)	/* etk_d0 */
+			OMAP3630_CORE2_IOPAD(0x25de, PIN_OUTPUT_PULLDOWN | MUX_MODE4)	/* etk_d1 */
+			OMAP3630_CORE2_IOPAD(0x25e0, PIN_OUTPUT_PULLDOWN | MUX_MODE4)	/* etk_d2 */
+			OMAP3630_CORE2_IOPAD(0x25e2, PIN_OUTPUT_PULLDOWN | MUX_MODE4)	/* etk_d3 */
+		>;
+	};
+
 	spi_gpio_pins: spi-gpio-pinmux-pins {
 		pinctrl-single,pins = <
 			OMAP3630_CORE2_IOPAD(0x25d8, PIN_OUTPUT | MUX_MODE4) /* clk */
--- a/arch/arm/mach-at91/pm.c
+++ b/arch/arm/mach-at91/pm.c
@ -591,7 +591,21 @@ static int at91_suspend_finish(unsigned long val)
 	return 0;
 }

-static void at91_pm_switch_ba_to_vbat(void)
+/**
+ * at91_pm_switch_ba_to_auto() - Configure Backup Unit Power Switch
+ * to automatic/hardware mode.
+ *
+ * The Backup Unit Power Switch can be managed either by software or hardware.
+ * Enabling hardware mode allows the automatic transition of power between
+ * VDDANA (or VDDIN33) and VDDBU (or VBAT, respectively), based on the
+ * availability of these power sources.
+ *
+ * If the Backup Unit Power Switch is already in automatic mode, no action is
+ * required. If it is in software-controlled mode, it is switched to automatic
+ * mode to enhance safety and eliminate the need for toggling between power
+ * sources.
+ */
+static void at91_pm_switch_ba_to_auto(void)
 {
 	unsigned int offset = offsetof(struct at91_pm_sfrbu_regs, pswbu);
 	unsigned int val;
@ -602,24 +616,19 @@ static void at91_pm_switch_ba_to_vbat(void)

 	val = readl(soc_pm.data.sfrbu + offset);

-	/* Already on VBAT. */
-	if (!(val & soc_pm.sfrbu_regs.pswbu.state))
+	/* Already on auto/hardware. */
+	if (!(val & soc_pm.sfrbu_regs.pswbu.ctrl))
 		return;

-	val &= ~soc_pm.sfrbu_regs.pswbu.softsw;
-	val |= soc_pm.sfrbu_regs.pswbu.key | soc_pm.sfrbu_regs.pswbu.ctrl;
+	val &= ~soc_pm.sfrbu_regs.pswbu.ctrl;
+	val |= soc_pm.sfrbu_regs.pswbu.key;
 	writel(val, soc_pm.data.sfrbu + offset);
-
-	/* Wait for update. */
-	val = readl(soc_pm.data.sfrbu + offset);
-	while (val & soc_pm.sfrbu_regs.pswbu.state)
-		val = readl(soc_pm.data.sfrbu + offset);
 }

 static void at91_pm_suspend(suspend_state_t state)
 {
 	if (soc_pm.data.mode == AT91_PM_BACKUP) {
-		at91_pm_switch_ba_to_vbat();
+		at91_pm_switch_ba_to_auto();

 		cpu_suspend(0, at91_suspend_finish);

--- a/arch/arm/mach-davinci/Kconfig
+++ b/arch/arm/mach-davinci/Kconfig
@ -27,6 +27,7 @@ config ARCH_DAVINCI_DA830

 config ARCH_DAVINCI_DA850
 	bool "DA850/OMAP-L138/AM18x based system"
+	select ARCH_DAVINCI_DA8XX
 	select DAVINCI_CP_INTC

 config ARCH_DAVINCI_DA8XX
--- a/arch/arm/mach-omap1/Kconfig
+++ b/arch/arm/mach-omap1/Kconfig
@ -9,6 +9,7 @@ menuconfig ARCH_OMAP1
 	select ARCH_OMAP
 	select CLKSRC_MMIO
 	select FORCE_PCI if PCCARD
+	select GENERIC_IRQ_CHIP
 	select GPIOLIB
 	help
 	  Support for older TI OMAP1 (omap7xx, omap15xx or omap16xx)
--- a/arch/arm/mach-omap1/board-nokia770.c
+++ b/arch/arm/mach-omap1/board-nokia770.c
@ -289,7 +289,7 @@ static struct gpiod_lookup_table nokia770_irq_gpio_table = {
 		GPIO_LOOKUP("gpio-0-15", 15, "ads7846_irq",
 			    GPIO_ACTIVE_HIGH),
 		/* GPIO used for retu IRQ */
-		GPIO_LOOKUP("gpio-48-63", 15, "retu_irq",
+		GPIO_LOOKUP("gpio-48-63", 14, "retu_irq",
 			    GPIO_ACTIVE_HIGH),
 		/* GPIO used for tahvo IRQ */
 		GPIO_LOOKUP("gpio-32-47", 8, "tahvo_irq",
--- a/arch/arm/mach-shmobile/headsmp.S
+++ b/arch/arm/mach-shmobile/headsmp.S
@ -136,6 +136,7 @@ ENDPROC(shmobile_smp_sleep)
 	.long	shmobile_smp_arg - 1b

 	.bss
+	.align	2
 	.globl	shmobile_smp_mpidr
 shmobile_smp_mpidr:
 	.space	NR_CPUS * 4
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts
@ -390,6 +390,8 @@
 &tcon0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&lcd_rgb666_pins>;
+	assigned-clocks = <&ccu CLK_TCON0>;
+	assigned-clock-parents = <&ccu CLK_PLL_VIDEO0_2X>;

 	status = "okay";
 };
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts
@ -369,6 +369,8 @@
 &tcon0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&lcd_rgb666_pins>;
+	assigned-clocks = <&ccu CLK_TCON0>;
+	assigned-clock-parents = <&ccu CLK_PLL_VIDEO0_2X>;

 	status = "okay";
 };
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
@ -410,6 +410,8 @@
 			clock-names = "ahb", "tcon-ch0";
 			clock-output-names = "tcon-data-clock";
 			#clock-cells = <0>;
+			assigned-clocks = <&ccu CLK_TCON0>;
+			assigned-clock-parents = <&ccu CLK_PLL_MIPI>;
 			resets = <&ccu RST_BUS_TCON0>, <&ccu RST_BUS_LVDS>;
 			reset-names = "lcd", "lvds";

--- a/arch/arm64/boot/dts/freescale/imx8mm-verdin-dahlia.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-verdin-dahlia.dtsi
@ -16,10 +16,10 @@
 			"Headphone Jack", "HPOUTR",
 			"IN2L", "Line In Jack",
 			"IN2R", "Line In Jack",
-			"Headphone Jack", "MICBIAS",
-			"IN1L", "Headphone Jack";
+			"Microphone Jack", "MICBIAS",
+			"IN1L", "Microphone Jack";
 		simple-audio-card,widgets =
-			"Microphone", "Headphone Jack",
+			"Microphone", "Microphone Jack",
 			"Headphone", "Headphone Jack",
 			"Line", "Line In Jack";

--- a/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql.dtsi
@ -1,7 +1,8 @@
 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
 /*
- * Copyright 2021-2022 TQ-Systems GmbH
- * Author: Alexander Stein <alexander.stein@tq-group.com>
+ * Copyright 2021-2025 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Alexander Stein
 */

 #include "imx8mp.dtsi"
@ -23,15 +24,6 @@
 		regulator-max-microvolt = <3300000>;
 		regulator-always-on;
 	};
-
-	/* e-MMC IO, needed for HS modes */
-	reg_vcc1v8: regulator-vcc1v8 {
-		compatible = "regulator-fixed";
-		regulator-name = "VCC1V8";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		regulator-always-on;
-	};
 };

 &A53_0 {
@ -193,7 +185,7 @@
 	no-sd;
 	no-sdio;
 	vmmc-supply = <&reg_vcc3v3>;
-	vqmmc-supply = <&reg_vcc1v8>;
+	vqmmc-supply = <&buck5_reg>;
 	status = "okay";
 };

--- a/arch/arm64/boot/dts/freescale/imx8mp-verdin-dahlia.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp-verdin-dahlia.dtsi
@ -16,10 +16,10 @@
 			"Headphone Jack", "HPOUTR",
 			"IN2L", "Line In Jack",
 			"IN2R", "Line In Jack",
-			"Headphone Jack", "MICBIAS",
-			"IN1L", "Headphone Jack";
+			"Microphone Jack", "MICBIAS",
+			"IN1L", "Microphone Jack";
 		simple-audio-card,widgets =
-			"Microphone", "Headphone Jack",
+			"Microphone", "Microphone Jack",
 			"Headphone", "Headphone Jack",
 			"Line", "Line In Jack";

--- a/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi
@ -938,7 +938,7 @@
 		interrupt-controller;
 		#interrupt-cells = <2>;

-		clock: mt6397clock {
+		clock: clocks {
 			compatible = "mediatek,mt6397-clk";
 			#clock-cells = <1>;
 		};
@ -949,11 +949,10 @@
 			#gpio-cells = <2>;
 		};

-		regulator: mt6397regulator {
+		regulators {
 			compatible = "mediatek,mt6397-regulator";

 			mt6397_vpca15_reg: buck_vpca15 {
-				regulator-compatible = "buck_vpca15";
 				regulator-name = "vpca15";
 				regulator-min-microvolt = < 700000>;
 				regulator-max-microvolt = <1350000>;
@ -963,7 +962,6 @@
 			};

 			mt6397_vpca7_reg: buck_vpca7 {
-				regulator-compatible = "buck_vpca7";
 				regulator-name = "vpca7";
 				regulator-min-microvolt = < 700000>;
 				regulator-max-microvolt = <1350000>;
@ -973,7 +971,6 @@
 			};

 			mt6397_vsramca15_reg: buck_vsramca15 {
-				regulator-compatible = "buck_vsramca15";
 				regulator-name = "vsramca15";
 				regulator-min-microvolt = < 700000>;
 				regulator-max-microvolt = <1350000>;
@ -982,7 +979,6 @@
 			};

 			mt6397_vsramca7_reg: buck_vsramca7 {
-				regulator-compatible = "buck_vsramca7";
 				regulator-name = "vsramca7";
 				regulator-min-microvolt = < 700000>;
 				regulator-max-microvolt = <1350000>;
@ -991,7 +987,6 @@
 			};

 			mt6397_vcore_reg: buck_vcore {
-				regulator-compatible = "buck_vcore";
 				regulator-name = "vcore";
 				regulator-min-microvolt = < 700000>;
 				regulator-max-microvolt = <1350000>;
@ -1000,7 +995,6 @@
 			};

 			mt6397_vgpu_reg: buck_vgpu {
-				regulator-compatible = "buck_vgpu";
 				regulator-name = "vgpu";
 				regulator-min-microvolt = < 700000>;
 				regulator-max-microvolt = <1350000>;
@ -1009,7 +1003,6 @@
 			};

 			mt6397_vdrm_reg: buck_vdrm {
-				regulator-compatible = "buck_vdrm";
 				regulator-name = "vdrm";
 				regulator-min-microvolt = <1200000>;
 				regulator-max-microvolt = <1400000>;
@ -1018,7 +1011,6 @@
 			};

 			mt6397_vio18_reg: buck_vio18 {
-				regulator-compatible = "buck_vio18";
 				regulator-name = "vio18";
 				regulator-min-microvolt = <1620000>;
 				regulator-max-microvolt = <1980000>;
@ -1027,18 +1019,15 @@
 			};

 			mt6397_vtcxo_reg: ldo_vtcxo {
-				regulator-compatible = "ldo_vtcxo";
 				regulator-name = "vtcxo";
 				regulator-always-on;
 			};

 			mt6397_va28_reg: ldo_va28 {
-				regulator-compatible = "ldo_va28";
 				regulator-name = "va28";
 			};

 			mt6397_vcama_reg: ldo_vcama {
-				regulator-compatible = "ldo_vcama";
 				regulator-name = "vcama";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
@ -1046,18 +1035,15 @@
 			};

 			mt6397_vio28_reg: ldo_vio28 {
-				regulator-compatible = "ldo_vio28";
 				regulator-name = "vio28";
 				regulator-always-on;
 			};

 			mt6397_vusb_reg: ldo_vusb {
-				regulator-compatible = "ldo_vusb";
 				regulator-name = "vusb";
 			};

 			mt6397_vmc_reg: ldo_vmc {
-				regulator-compatible = "ldo_vmc";
 				regulator-name = "vmc";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <3300000>;
@ -1065,7 +1051,6 @@
 			};

 			mt6397_vmch_reg: ldo_vmch {
-				regulator-compatible = "ldo_vmch";
 				regulator-name = "vmch";
 				regulator-min-microvolt = <3000000>;
 				regulator-max-microvolt = <3300000>;
@ -1073,7 +1058,6 @@
 			};

 			mt6397_vemc_3v3_reg: ldo_vemc3v3 {
-				regulator-compatible = "ldo_vemc3v3";
 				regulator-name = "vemc_3v3";
 				regulator-min-microvolt = <3000000>;
 				regulator-max-microvolt = <3300000>;
@ -1081,7 +1065,6 @@
 			};

 			mt6397_vgp1_reg: ldo_vgp1 {
-				regulator-compatible = "ldo_vgp1";
 				regulator-name = "vcamd";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
@ -1089,7 +1072,6 @@
 			};

 			mt6397_vgp2_reg: ldo_vgp2 {
-				regulator-compatible = "ldo_vgp2";
 				regulator-name = "vcamio";
 				regulator-min-microvolt = <3300000>;
 				regulator-max-microvolt = <3300000>;
@ -1097,7 +1079,6 @@
 			};

 			mt6397_vgp3_reg: ldo_vgp3 {
-				regulator-compatible = "ldo_vgp3";
 				regulator-name = "vcamaf";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
@ -1105,7 +1086,6 @@
 			};

 			mt6397_vgp4_reg: ldo_vgp4 {
-				regulator-compatible = "ldo_vgp4";
 				regulator-name = "vgp4";
 				regulator-min-microvolt = <1200000>;
 				regulator-max-microvolt = <3300000>;
@ -1113,7 +1093,6 @@
 			};

 			mt6397_vgp5_reg: ldo_vgp5 {
-				regulator-compatible = "ldo_vgp5";
 				regulator-name = "vgp5";
 				regulator-min-microvolt = <1200000>;
 				regulator-max-microvolt = <3000000>;
@ -1121,7 +1100,6 @@
 			};

 			mt6397_vgp6_reg: ldo_vgp6 {
-				regulator-compatible = "ldo_vgp6";
 				regulator-name = "vgp6";
 				regulator-min-microvolt = <3300000>;
 				regulator-max-microvolt = <3300000>;
@ -1130,7 +1108,6 @@
 			};

 			mt6397_vibr_reg: ldo_vibr {
-				regulator-compatible = "ldo_vibr";
 				regulator-name = "vibr";
 				regulator-min-microvolt = <1300000>;
 				regulator-max-microvolt = <3300000>;
@ -1138,7 +1115,7 @@
 			};
 		};

-		rtc: mt6397rtc {
+		rtc: rtc {
 			compatible = "mediatek,mt6397-rtc";
 		};

--- a/arch/arm64/boot/dts/mediatek/mt8173-evb.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8173-evb.dts
@ -308,11 +308,10 @@
 		interrupt-controller;
 		#interrupt-cells = <2>;

-		mt6397regulator: mt6397regulator {
+		regulators {
 			compatible = "mediatek,mt6397-regulator";

 			mt6397_vpca15_reg: buck_vpca15 {
-				regulator-compatible = "buck_vpca15";
 				regulator-name = "vpca15";
 				regulator-min-microvolt = < 700000>;
 				regulator-max-microvolt = <1350000>;
@ -321,7 +320,6 @@
 			};

 			mt6397_vpca7_reg: buck_vpca7 {
-				regulator-compatible = "buck_vpca7";
 				regulator-name = "vpca7";
 				regulator-min-microvolt = < 700000>;
 				regulator-max-microvolt = <1350000>;
@ -330,7 +328,6 @@
 			};

 			mt6397_vsramca15_reg: buck_vsramca15 {
-				regulator-compatible = "buck_vsramca15";
 				regulator-name = "vsramca15";
 				regulator-min-microvolt = < 700000>;
 				regulator-max-microvolt = <1350000>;
@ -339,7 +336,6 @@
 			};

 			mt6397_vsramca7_reg: buck_vsramca7 {
-				regulator-compatible = "buck_vsramca7";
 				regulator-name = "vsramca7";
 				regulator-min-microvolt = < 700000>;
 				regulator-max-microvolt = <1350000>;
@ -348,7 +344,6 @@
 			};

 			mt6397_vcore_reg: buck_vcore {
-				regulator-compatible = "buck_vcore";
 				regulator-name = "vcore";
 				regulator-min-microvolt = < 700000>;
 				regulator-max-microvolt = <1350000>;
@ -357,7 +352,6 @@
 			};

 			mt6397_vgpu_reg: buck_vgpu {
-				regulator-compatible = "buck_vgpu";
 				regulator-name = "vgpu";
 				regulator-min-microvolt = < 700000>;
 				regulator-max-microvolt = <1350000>;
@ -366,7 +360,6 @@
 			};

 			mt6397_vdrm_reg: buck_vdrm {
-				regulator-compatible = "buck_vdrm";
 				regulator-name = "vdrm";
 				regulator-min-microvolt = <1200000>;
 				regulator-max-microvolt = <1400000>;
@ -375,7 +368,6 @@
 			};

 			mt6397_vio18_reg: buck_vio18 {
-				regulator-compatible = "buck_vio18";
 				regulator-name = "vio18";
 				regulator-min-microvolt = <1620000>;
 				regulator-max-microvolt = <1980000>;
@ -384,19 +376,16 @@
 			};

 			mt6397_vtcxo_reg: ldo_vtcxo {
-				regulator-compatible = "ldo_vtcxo";
 				regulator-name = "vtcxo";
 				regulator-always-on;
 			};

 			mt6397_va28_reg: ldo_va28 {
-				regulator-compatible = "ldo_va28";
 				regulator-name = "va28";
 				regulator-always-on;
 			};

 			mt6397_vcama_reg: ldo_vcama {
-				regulator-compatible = "ldo_vcama";
 				regulator-name = "vcama";
 				regulator-min-microvolt = <1500000>;
 				regulator-max-microvolt = <2800000>;
@ -404,18 +393,15 @@
 			};

 			mt6397_vio28_reg: ldo_vio28 {
-				regulator-compatible = "ldo_vio28";
 				regulator-name = "vio28";
 				regulator-always-on;
 			};

 			mt6397_vusb_reg: ldo_vusb {
-				regulator-compatible = "ldo_vusb";
 				regulator-name = "vusb";
 			};

 			mt6397_vmc_reg: ldo_vmc {
-				regulator-compatible = "ldo_vmc";
 				regulator-name = "vmc";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <3300000>;
@ -423,7 +409,6 @@
 			};

 			mt6397_vmch_reg: ldo_vmch {
-				regulator-compatible = "ldo_vmch";
 				regulator-name = "vmch";
 				regulator-min-microvolt = <3000000>;
 				regulator-max-microvolt = <3300000>;
@ -431,7 +416,6 @@
 			};

 			mt6397_vemc_3v3_reg: ldo_vemc3v3 {
-				regulator-compatible = "ldo_vemc3v3";
 				regulator-name = "vemc_3v3";
 				regulator-min-microvolt = <3000000>;
 				regulator-max-microvolt = <3300000>;
@ -439,7 +423,6 @@
 			};

 			mt6397_vgp1_reg: ldo_vgp1 {
-				regulator-compatible = "ldo_vgp1";
 				regulator-name = "vcamd";
 				regulator-min-microvolt = <1220000>;
 				regulator-max-microvolt = <3300000>;
@ -447,7 +430,6 @@
 			};

 			mt6397_vgp2_reg: ldo_vgp2 {
-				regulator-compatible = "ldo_vgp2";
 				regulator-name = "vcamio";
 				regulator-min-microvolt = <1000000>;
 				regulator-max-microvolt = <3300000>;
@ -455,7 +437,6 @@
 			};

 			mt6397_vgp3_reg: ldo_vgp3 {
-				regulator-compatible = "ldo_vgp3";
 				regulator-name = "vcamaf";
 				regulator-min-microvolt = <1200000>;
 				regulator-max-microvolt = <3300000>;
@ -463,7 +444,6 @@
 			};

 			mt6397_vgp4_reg: ldo_vgp4 {
-				regulator-compatible = "ldo_vgp4";
 				regulator-name = "vgp4";
 				regulator-min-microvolt = <1200000>;
 				regulator-max-microvolt = <3300000>;
@ -471,7 +451,6 @@
 			};

 			mt6397_vgp5_reg: ldo_vgp5 {
-				regulator-compatible = "ldo_vgp5";
 				regulator-name = "vgp5";
 				regulator-min-microvolt = <1200000>;
 				regulator-max-microvolt = <3000000>;
@ -479,7 +458,6 @@
 			};

 			mt6397_vgp6_reg: ldo_vgp6 {
-				regulator-compatible = "ldo_vgp6";
 				regulator-name = "vgp6";
 				regulator-min-microvolt = <1200000>;
 				regulator-max-microvolt = <3300000>;
@ -487,7 +465,6 @@
 			};

 			mt6397_vibr_reg: ldo_vibr {
-				regulator-compatible = "ldo_vibr";
 				regulator-name = "vibr";
 				regulator-min-microvolt = <1300000>;
 				regulator-max-microvolt = <3300000>;
--- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-damu.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-damu.dts
@ -27,6 +27,10 @@
 	hid-descr-addr = <0x0001>;
 };

+&mt6358codec {
+	mediatek,dmic-mode = <1>; /* one-wire */
+};
+
 &qca_wifi {
 	qcom,ath10k-calibration-variant = "GO_DAMU";
 };
--- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-kenzo.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-kenzo.dts
@ -11,3 +11,18 @@
 	model = "Google kenzo sku17 board";
 	compatible = "google,juniper-sku17", "google,juniper", "mediatek,mt8183";
 };
+
+&i2c0 {
+	touchscreen@40 {
+		compatible = "hid-over-i2c";
+		reg = <0x40>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&touchscreen_pins>;
+
+		interrupts-extended = <&pio 155 IRQ_TYPE_LEVEL_LOW>;
+
+		post-power-on-delay-ms = <70>;
+		hid-descr-addr = <0x0001>;
+	};
+};
--- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-willow.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-willow.dtsi
@ -6,6 +6,21 @@
 /dts-v1/;
 #include "mt8183-kukui-jacuzzi.dtsi"

+&i2c0 {
+	touchscreen@40 {
+		compatible = "hid-over-i2c";
+		reg = <0x40>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&touchscreen_pins>;
+
+		interrupts-extended = <&pio 155 IRQ_TYPE_LEVEL_LOW>;
+
+		post-power-on-delay-ms = <70>;
+		hid-descr-addr = <0x0001>;
+	};
+};
+
 &i2c2 {
 	trackpad@2c {
 		compatible = "hid-over-i2c";
--- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi.dtsi
@ -39,8 +39,6 @@
 	pp3300_panel: pp3300-panel {
 		compatible = "regulator-fixed";
 		regulator-name = "pp3300_panel";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pp3300_panel_pins>;

--- a/arch/arm64/boot/dts/mediatek/mt8183.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
@ -1026,7 +1026,8 @@
 		};

 		keyboard: keyboard@10010000 {
-			compatible = "mediatek,mt6779-keypad";
+			compatible = "mediatek,mt8183-keypad",
+				     "mediatek,mt6779-keypad";
 			reg = <0 0x10010000 0 0x1000>;
 			interrupts = <GIC_SPI 186 IRQ_TYPE_EDGE_FALLING>;
 			clocks = <&clk26m>;
@ -1827,6 +1828,7 @@
 			resets = <&mmsys MT8183_MMSYS_SW0_RST_B_DISP_DSI0>;
 			phys = <&mipi_tx0>;
 			phy-names = "dphy";
+			status = "disabled";
 		};

 		mutex: mutex@14016000 {
--- a/arch/arm64/boot/dts/mediatek/mt8186.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8186.dtsi
@ -1545,6 +1545,8 @@
 			#address-cells = <2>;
 			#size-cells = <2>;
 			ranges;
+			wakeup-source;
+			mediatek,syscon-wakeup = <&pericfg 0x420 2>;
 			status = "disabled";

 			usb_host0: usb@11200000 {
@ -1558,8 +1560,6 @@
 					 <&infracfg_ao CLK_INFRA_AO_SSUSB_TOP_XHCI>;
 				clock-names = "sys_ck", "ref_ck", "mcu_ck", "dma_ck", "xhci_ck";
 				interrupts = <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH 0>;
-				mediatek,syscon-wakeup = <&pericfg 0x420 2>;
-				wakeup-source;
 				status = "disabled";
 			};
 		};
@ -1611,6 +1611,8 @@
 			#address-cells = <2>;
 			#size-cells = <2>;
 			ranges;
+			wakeup-source;
+			mediatek,syscon-wakeup = <&pericfg 0x424 2>;
 			status = "disabled";

 			usb_host1: usb@11280000 {
@ -1624,8 +1626,6 @@
 					 <&infracfg_ao CLK_INFRA_AO_SSUSB_TOP_P1_XHCI>;
 				clock-names = "sys_ck", "ref_ck", "mcu_ck", "dma_ck","xhci_ck";
 				interrupts = <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH 0>;
-				mediatek,syscon-wakeup = <&pericfg 0x424 2>;
-				wakeup-source;
 				status = "disabled";
 			};
 		};
--- a/arch/arm64/boot/dts/mediatek/mt8192-asurada.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8192-asurada.dtsi
@ -1391,7 +1391,6 @@

 		regulators {
 			mt6315_6_vbuck1: vbuck1 {
-				regulator-compatible = "vbuck1";
 				regulator-name = "Vbcpu";
 				regulator-min-microvolt = <400000>;
 				regulator-max-microvolt = <1193750>;
@ -1401,7 +1400,6 @@
 			};

 			mt6315_6_vbuck3: vbuck3 {
-				regulator-compatible = "vbuck3";
 				regulator-name = "Vlcpu";
 				regulator-min-microvolt = <400000>;
 				regulator-max-microvolt = <1193750>;
@ -1418,7 +1416,6 @@

 		regulators {
 			mt6315_7_vbuck1: vbuck1 {
-				regulator-compatible = "vbuck1";
 				regulator-name = "Vgpu";
 				regulator-min-microvolt = <400000>;
 				regulator-max-microvolt = <800000>;
--- a/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi
@ -1203,7 +1203,6 @@

 		regulators {
 			mt6315_6_vbuck1: vbuck1 {
-				regulator-compatible = "vbuck1";
 				regulator-name = "Vbcpu";
 				regulator-min-microvolt = <400000>;
 				regulator-max-microvolt = <1193750>;
@ -1221,7 +1220,6 @@

 		regulators {
 			mt6315_7_vbuck1: vbuck1 {
-				regulator-compatible = "vbuck1";
 				regulator-name = "Vgpu";
 				regulator-min-microvolt = <400000>;
 				regulator-max-microvolt = <1193750>;
--- a/arch/arm64/boot/dts/mediatek/mt8195-demo.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8195-demo.dts
@ -137,7 +137,6 @@
 			richtek,vinovp-microvolt = <14500000>;

 			otg_vbus_regulator: usb-otg-vbus-regulator {
-				regulator-compatible = "usb-otg-vbus";
 				regulator-name = "usb-otg-vbus";
 				regulator-min-microvolt = <4425000>;
 				regulator-max-microvolt = <5825000>;
@ -149,7 +148,6 @@
 			LDO_VIN3-supply = <&mt6360_buck2>;

 			mt6360_buck1: buck1 {
-				regulator-compatible = "BUCK1";
 				regulator-name = "mt6360,buck1";
 				regulator-min-microvolt = <300000>;
 				regulator-max-microvolt = <1300000>;
@ -160,7 +158,6 @@
 			};

 			mt6360_buck2: buck2 {
-				regulator-compatible = "BUCK2";
 				regulator-name = "mt6360,buck2";
 				regulator-min-microvolt = <300000>;
 				regulator-max-microvolt = <1300000>;
@ -171,7 +168,6 @@
 			};

 			mt6360_ldo1: ldo1 {
-				regulator-compatible = "LDO1";
 				regulator-name = "mt6360,ldo1";
 				regulator-min-microvolt = <1200000>;
 				regulator-max-microvolt = <3600000>;
@ -180,7 +176,6 @@
 			};

 			mt6360_ldo2: ldo2 {
-				regulator-compatible = "LDO2";
 				regulator-name = "mt6360,ldo2";
 				regulator-min-microvolt = <1200000>;
 				regulator-max-microvolt = <3600000>;
@ -189,7 +184,6 @@
 			};

 			mt6360_ldo3: ldo3 {
-				regulator-compatible = "LDO3";
 				regulator-name = "mt6360,ldo3";
 				regulator-min-microvolt = <1200000>;
 				regulator-max-microvolt = <3600000>;
@ -198,7 +192,6 @@
 			};

 			mt6360_ldo5: ldo5 {
-				regulator-compatible = "LDO5";
 				regulator-name = "mt6360,ldo5";
 				regulator-min-microvolt = <2700000>;
 				regulator-max-microvolt = <3600000>;
@ -207,7 +200,6 @@
 			};

 			mt6360_ldo6: ldo6 {
-				regulator-compatible = "LDO6";
 				regulator-name = "mt6360,ldo6";
 				regulator-min-microvolt = <500000>;
 				regulator-max-microvolt = <2100000>;
@ -216,7 +208,6 @@
 			};

 			mt6360_ldo7: ldo7 {
-				regulator-compatible = "LDO7";
 				regulator-name = "mt6360,ldo7";
 				regulator-min-microvolt = <500000>;
 				regulator-max-microvolt = <2100000>;
--- a/arch/arm64/boot/dts/mediatek/mt8195.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8195.dtsi
@ -1572,9 +1572,6 @@
 			phy-names = "pcie-phy";
 			power-domains = <&spm MT8195_POWER_DOMAIN_PCIE_MAC_P1>;

-			resets = <&infracfg_ao MT8195_INFRA_RST2_PCIE_P1_SWRST>;
-			reset-names = "mac";
-
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 7>;
 			interrupt-map = <0 0 0 1 &pcie_intc1 0>,
@ -2680,7 +2677,7 @@
 		};

 		ovl0: ovl@1c000000 {
-			compatible = "mediatek,mt8195-disp-ovl", "mediatek,mt8183-disp-ovl";
+			compatible = "mediatek,mt8195-disp-ovl";
 			reg = <0 0x1c000000 0 0x1000>;
 			interrupts = <GIC_SPI 636 IRQ_TYPE_LEVEL_HIGH 0>;
 			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS0>;
--- a/arch/arm64/boot/dts/mediatek/mt8365.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8365.dtsi
@ -334,7 +334,8 @@
 		};

 		keypad: keypad@10010000 {
-			compatible = "mediatek,mt6779-keypad";
+			compatible = "mediatek,mt8365-keypad",
+				     "mediatek,mt6779-keypad";
 			reg = <0 0x10010000 0 0x1000>;
 			wakeup-source;
 			interrupts = <GIC_SPI 124 IRQ_TYPE_EDGE_FALLING>;
--- a/arch/arm64/boot/dts/mediatek/mt8516.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8516.dtsi
@ -144,10 +144,10 @@
 		#size-cells = <2>;
 		ranges;

-		/* 128 KiB reserved for ARM Trusted Firmware (BL31) */
+		/* 192 KiB reserved for ARM Trusted Firmware (BL31) */
 		bl31_secmon_reserved: secmon@43000000 {
 			no-map;
-			reg = <0 0x43000000 0 0x20000>;
+			reg = <0 0x43000000 0 0x30000>;
 		};
 	};

@ -206,7 +206,7 @@
 			compatible = "mediatek,mt8516-wdt",
 				     "mediatek,mt6589-wdt";
 			reg = <0 0x10007000 0 0x1000>;
-			interrupts = <GIC_SPI 198 IRQ_TYPE_EDGE_FALLING>;
+			interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_LOW>;
 			#reset-cells = <1>;
 		};

@ -268,7 +268,7 @@
 			interrupt-parent = <&gic>;
 			interrupt-controller;
 			reg = <0 0x10310000 0 0x1000>,
-			      <0 0x10320000 0 0x1000>,
+			      <0 0x1032f000 0 0x2000>,
 			      <0 0x10340000 0 0x2000>,
 			      <0 0x10360000 0 0x2000>;
 			interrupts = <GIC_PPI 9
@ -344,6 +344,7 @@
 			reg = <0 0x11009000 0 0x90>,
 			      <0 0x11000180 0 0x80>;
 			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_LOW>;
+			clock-div = <2>;
 			clocks = <&topckgen CLK_TOP_I2C0>,
 				 <&topckgen CLK_TOP_APDMA>;
 			clock-names = "main", "dma";
@ -358,6 +359,7 @@
 			reg = <0 0x1100a000 0 0x90>,
 			      <0 0x11000200 0 0x80>;
 			interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_LOW>;
+			clock-div = <2>;
 			clocks = <&topckgen CLK_TOP_I2C1>,
 				 <&topckgen CLK_TOP_APDMA>;
 			clock-names = "main", "dma";
@ -372,6 +374,7 @@
 			reg = <0 0x1100b000 0 0x90>,
 			      <0 0x11000280 0 0x80>;
 			interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_LOW>;
+			clock-div = <2>;
 			clocks = <&topckgen CLK_TOP_I2C2>,
 				 <&topckgen CLK_TOP_APDMA>;
 			clock-names = "main", "dma";
--- a/arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi
+++ b/arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi
@ -47,7 +47,6 @@
 };

 &i2c0 {
-	clock-div = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c0_pins_a>;
 	status = "okay";
@ -156,7 +155,6 @@
 };

 &i2c2 {
-	clock-div = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c2_pins_a>;
 	status = "okay";
--- a/arch/arm64/boot/dts/nvidia/tegra234.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra234.dtsi
@ -1709,7 +1709,7 @@
 			compatible = "nvidia,tegra234-sce-fabric";
 			reg = <0x0 0xb600000 0x0 0x40000>;
 			interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
-			status = "okay";
+			status = "disabled";
 		};

 		rce-fabric@be00000 {
@ -1794,7 +1794,7 @@
 			assigned-clock-parents = <&bpmp TEGRA234_CLK_PLLP_OUT0>;
 			resets = <&bpmp TEGRA234_RESET_SPI2>;
 			reset-names = "spi";
-			dmas = <&gpcdma 19>, <&gpcdma 19>;
+			dmas = <&gpcdma 16>, <&gpcdma 16>;
 			dma-names = "rx", "tx";
 			dma-coherent;
 			status = "disabled";
@ -1889,7 +1889,7 @@
 		};

 		dce-fabric@de00000 {
-			compatible = "nvidia,tegra234-sce-fabric";
+			compatible = "nvidia,tegra234-dce-fabric";
 			reg = <0x0 0xde00000 0x0 0x40000>;
 			interrupts = <GIC_SPI 381 IRQ_TYPE_LEVEL_HIGH>;
 			status = "okay";
@ -1912,6 +1912,8 @@
 			#redistributor-regions = <1>;
 			#interrupt-cells = <3>;
 			interrupt-controller;
+
+			#address-cells = <0>;
 		};

 		smmu_iso: iommu@10000000 {
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@ -171,6 +171,9 @@ dtb-$(CONFIG_ARCH_QCOM)	+= sdm845-cheza-r1.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sdm845-cheza-r2.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sdm845-cheza-r3.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sdm845-db845c.dtb
+
+sdm845-db845c-navigation-mezzanine-dtbs	:= sdm845-db845c.dtb sdm845-db845c-navigation-mezzanine.dtbo
+
 dtb-$(CONFIG_ARCH_QCOM)	+= sdm845-db845c-navigation-mezzanine.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sdm845-lg-judyln.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sdm845-lg-judyp.dtb
--- a/arch/arm64/boot/dts/qcom/msm8916.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi
@ -104,7 +104,7 @@
 		sleep_clk: sleep-clk {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
-			clock-frequency = <32768>;
+			clock-frequency = <32764>;
 		};
 	};

--- a/arch/arm64/boot/dts/qcom/msm8939.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8939.dtsi
@ -33,7 +33,7 @@
 		sleep_clk: sleep-clk {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
-			clock-frequency = <32768>;
+			clock-frequency = <32764>;
 		};
 	};

--- a/arch/arm64/boot/dts/qcom/msm8994.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8994.dtsi
@ -34,7 +34,7 @@
 		sleep_clk: sleep-clk {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
-			clock-frequency = <32768>;
+			clock-frequency = <32764>;
 			clock-output-names = "sleep_clk";
 		};
 	};
@ -437,6 +437,15 @@
 			#size-cells = <1>;
 			ranges;

+			interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "pwr_event",
+					  "qusb2_phy",
+					  "hs_phy_irq",
+					  "ss_phy_irq";
+
 			clocks = <&gcc GCC_USB30_MASTER_CLK>,
 				 <&gcc GCC_SYS_NOC_USB3_AXI_CLK>,
 				 <&gcc GCC_USB30_SLEEP_CLK>,
--- a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-gemini.dts
+++ b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-gemini.dts
@ -64,7 +64,7 @@
 		};

 		led@1 {
-			reg = <0>;
+			reg = <1>;
 			chan-name = "button-backlight1";
 			led-cur = /bits/ 8 <0x32>;
 			max-cur = /bits/ 8 <0xc8>;
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@ -3046,9 +3046,14 @@
 			#size-cells = <1>;
 			ranges;

-			interrupts = <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>,
+			interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "hs_phy_irq", "ss_phy_irq";
+			interrupt-names = "pwr_event",
+					  "qusb2_phy",
+					  "hs_phy_irq",
+					  "ss_phy_irq";

 			clocks = <&gcc GCC_SYS_NOC_USB3_AXI_CLK>,
 				 <&gcc GCC_USB30_MASTER_CLK>,
--- a/arch/arm64/boot/dts/qcom/pm6150.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm6150.dtsi
@ -13,7 +13,7 @@
 	thermal-zones {
 		pm6150_thermal: pm6150-thermal {
 			polling-delay-passive = <100>;
-			polling-delay = <0>;
+
 			thermal-sensors = <&pm6150_temp>;

 			trips {
--- a/arch/arm64/boot/dts/qcom/pm6150l.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm6150l.dtsi
@ -10,9 +10,6 @@
 / {
 	thermal-zones {
 		pm6150l-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-
 			thermal-sensors = <&pm6150l_temp>;

 			trips {
--- a/arch/arm64/boot/dts/qcom/qcs404.dtsi
+++ b/arch/arm64/boot/dts/qcom/qcs404.dtsi
@ -28,7 +28,7 @@
 		sleep_clk: sleep-clk {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
-			clock-frequency = <32768>;
+			clock-frequency = <32764>;
 		};
 	};

--- a/arch/arm64/boot/dts/qcom/qdu1000-idp.dts
+++ b/arch/arm64/boot/dts/qcom/qdu1000-idp.dts
@ -31,7 +31,7 @@

 		sleep_clk: sleep-clk {
 			compatible = "fixed-clock";
-			clock-frequency = <32000>;
+			clock-frequency = <32764>;
 			#clock-cells = <0>;
 		};
 	};
--- a/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts
+++ b/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts
@ -492,7 +492,7 @@
 };

 &sleep_clk {
-	clock-frequency = <32000>;
+	clock-frequency = <32764>;
 };

 &tlmm {
--- a/arch/arm64/boot/dts/qcom/qru1000-idp.dts
+++ b/arch/arm64/boot/dts/qcom/qru1000-idp.dts
@ -31,7 +31,7 @@

 		sleep_clk: sleep-clk {
 			compatible = "fixed-clock";
-			clock-frequency = <32000>;
+			clock-frequency = <32764>;
 			#clock-cells = <0>;
 		};
 	};
--- a/arch/arm64/boot/dts/qcom/sa8775p-ride.dts
+++ b/arch/arm64/boot/dts/qcom/sa8775p-ride.dts
@ -5,828 +5,43 @@

 /dts-v1/;

-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
-
-#include "sa8775p.dtsi"
-#include "sa8775p-pmics.dtsi"
+#include "sa8775p-ride.dtsi"

 / {
 	model = "Qualcomm SA8775P Ride";
 	compatible = "qcom,sa8775p-ride", "qcom,sa8775p";
-
-	aliases {
-		ethernet0 = &ethernet0;
-		ethernet1 = &ethernet1;
-		i2c11 = &i2c11;
-		i2c18 = &i2c18;
-		serial0 = &uart10;
-		serial1 = &uart12;
-		serial2 = &uart17;
-		spi16 = &spi16;
-		ufshc1 = &ufs_mem_hc;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-};
-
-&apps_rsc {
-	regulators-0 {
-		compatible = "qcom,pmm8654au-rpmh-regulators";
-		qcom,pmic-id = "a";
-
-		vreg_s4a: smps4 {
-			regulator-name = "vreg_s4a";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1816000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_s5a: smps5 {
-			regulator-name = "vreg_s5a";
-			regulator-min-microvolt = <1850000>;
-			regulator-max-microvolt = <1996000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_s9a: smps9 {
-			regulator-name = "vreg_s9a";
-			regulator-min-microvolt = <535000>;
-			regulator-max-microvolt = <1120000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l4a: ldo4 {
-			regulator-name = "vreg_l4a";
-			regulator-min-microvolt = <788000>;
-			regulator-max-microvolt = <1050000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-			regulator-allow-set-load;
-			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
-						   RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l5a: ldo5 {
-			regulator-name = "vreg_l5a";
-			regulator-min-microvolt = <870000>;
-			regulator-max-microvolt = <950000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-			regulator-allow-set-load;
-			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
-						   RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l6a: ldo6 {
-			regulator-name = "vreg_l6a";
-			regulator-min-microvolt = <870000>;
-			regulator-max-microvolt = <970000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-			regulator-allow-set-load;
-			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
-						   RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l7a: ldo7 {
-			regulator-name = "vreg_l7a";
-			regulator-min-microvolt = <720000>;
-			regulator-max-microvolt = <950000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-			regulator-allow-set-load;
-			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
-						   RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l8a: ldo8 {
-			regulator-name = "vreg_l8a";
-			regulator-min-microvolt = <2504000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-			regulator-allow-set-load;
-			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
-						   RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l9a: ldo9 {
-			regulator-name = "vreg_l9a";
-			regulator-min-microvolt = <2970000>;
-			regulator-max-microvolt = <3544000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-			regulator-allow-set-load;
-			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
-						   RPMH_REGULATOR_MODE_HPM>;
-		};
-	};
-
-	regulators-1 {
-		compatible = "qcom,pmm8654au-rpmh-regulators";
-		qcom,pmic-id = "c";
-
-		vreg_l1c: ldo1 {
-			regulator-name = "vreg_l1c";
-			regulator-min-microvolt = <1140000>;
-			regulator-max-microvolt = <1260000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-			regulator-allow-set-load;
-			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
-						   RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l2c: ldo2 {
-			regulator-name = "vreg_l2c";
-			regulator-min-microvolt = <900000>;
-			regulator-max-microvolt = <1100000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-			regulator-allow-set-load;
-			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
-						   RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l3c: ldo3 {
-			regulator-name = "vreg_l3c";
-			regulator-min-microvolt = <1100000>;
-			regulator-max-microvolt = <1300000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-			regulator-allow-set-load;
-			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
-						   RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l4c: ldo4 {
-			regulator-name = "vreg_l4c";
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1200000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-			/*
-			 * FIXME: This should have regulator-allow-set-load but
-			 * we're getting an over-current fault from the PMIC
-			 * when switching to LPM.
-			 */
-		};
-
-		vreg_l5c: ldo5 {
-			regulator-name = "vreg_l5c";
-			regulator-min-microvolt = <1100000>;
-			regulator-max-microvolt = <1300000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-			regulator-allow-set-load;
-			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
-						   RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l6c: ldo6 {
-			regulator-name = "vreg_l6c";
-			regulator-min-microvolt = <1620000>;
-			regulator-max-microvolt = <1980000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-			regulator-allow-set-load;
-			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
-						   RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l7c: ldo7 {
-			regulator-name = "vreg_l7c";
-			regulator-min-microvolt = <1620000>;
-			regulator-max-microvolt = <2000000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-			regulator-allow-set-load;
-			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
-						   RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l8c: ldo8 {
-			regulator-name = "vreg_l8c";
-			regulator-min-microvolt = <2400000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-			regulator-allow-set-load;
-			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
-						   RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l9c: ldo9 {
-			regulator-name = "vreg_l9c";
-			regulator-min-microvolt = <1650000>;
-			regulator-max-microvolt = <2700000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-			regulator-allow-set-load;
-			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
-						   RPMH_REGULATOR_MODE_HPM>;
-		};
-	};
-
-	regulators-2 {
-		compatible = "qcom,pmm8654au-rpmh-regulators";
-		qcom,pmic-id = "e";
-
-		vreg_s4e: smps4 {
-			regulator-name = "vreg_s4e";
-			regulator-min-microvolt = <970000>;
-			regulator-max-microvolt = <1520000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_s7e: smps7 {
-			regulator-name = "vreg_s7e";
-			regulator-min-microvolt = <1010000>;
-			regulator-max-microvolt = <1170000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_s9e: smps9 {
-			regulator-name = "vreg_s9e";
-			regulator-min-microvolt = <300000>;
-			regulator-max-microvolt = <570000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l6e: ldo6 {
-			regulator-name = "vreg_l6e";
-			regulator-min-microvolt = <1280000>;
-			regulator-max-microvolt = <1450000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-			regulator-allow-set-load;
-			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
-						   RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l8e: ldo8 {
-			regulator-name = "vreg_l8e";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1950000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-			regulator-allow-set-load;
-			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
-						   RPMH_REGULATOR_MODE_HPM>;
-		};
-	};
 };

 &ethernet0 {
 	phy-mode = "sgmii";
-	phy-handle = <&sgmii_phy0>;
-
-	pinctrl-0 = <&ethernet0_default>;
-	pinctrl-names = "default";
-
-	snps,mtl-rx-config = <&mtl_rx_setup>;
-	snps,mtl-tx-config = <&mtl_tx_setup>;
-	snps,ps-speed = <1000>;
-
-	status = "okay";
-
-	mdio {
-		compatible = "snps,dwmac-mdio";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		sgmii_phy0: phy@8 {
-			compatible = "ethernet-phy-id0141.0dd4";
-			reg = <0x8>;
-			device_type = "ethernet-phy";
-			reset-gpios = <&pmm8654au_2_gpios 8 GPIO_ACTIVE_LOW>;
-			reset-assert-us = <11000>;
-			reset-deassert-us = <70000>;
-		};
-
-		sgmii_phy1: phy@a {
-			compatible = "ethernet-phy-id0141.0dd4";
-			reg = <0xa>;
-			device_type = "ethernet-phy";
-			reset-gpios = <&pmm8654au_2_gpios 9 GPIO_ACTIVE_LOW>;
-			reset-assert-us = <11000>;
-			reset-deassert-us = <70000>;
-		};
-	};
-
-	mtl_rx_setup: rx-queues-config {
-		snps,rx-queues-to-use = <4>;
-		snps,rx-sched-sp;
-
-		queue0 {
-			snps,dcb-algorithm;
-			snps,map-to-dma-channel = <0x0>;
-			snps,route-up;
-			snps,priority = <0x1>;
-		};
-
-		queue1 {
-			snps,dcb-algorithm;
-			snps,map-to-dma-channel = <0x1>;
-			snps,route-ptp;
-		};
-
-		queue2 {
-			snps,avb-algorithm;
-			snps,map-to-dma-channel = <0x2>;
-			snps,route-avcp;
-		};
-
-		queue3 {
-			snps,avb-algorithm;
-			snps,map-to-dma-channel = <0x3>;
-			snps,priority = <0xc>;
-		};
-	};
-
-	mtl_tx_setup: tx-queues-config {
-		snps,tx-queues-to-use = <4>;
-		snps,tx-sched-sp;
-
-		queue0 {
-			snps,dcb-algorithm;
-		};
-
-		queue1 {
-			snps,dcb-algorithm;
-		};
-
-		queue2 {
-			snps,avb-algorithm;
-			snps,send_slope = <0x1000>;
-			snps,idle_slope = <0x1000>;
-			snps,high_credit = <0x3e800>;
-			snps,low_credit = <0xffc18000>;
-		};
-
-		queue3 {
-			snps,avb-algorithm;
-			snps,send_slope = <0x1000>;
-			snps,idle_slope = <0x1000>;
-			snps,high_credit = <0x3e800>;
-			snps,low_credit = <0xffc18000>;
-		};
-	};
 };

 &ethernet1 {
 	phy-mode = "sgmii";
-	phy-handle = <&sgmii_phy1>;
+};

-	snps,mtl-rx-config = <&mtl_rx_setup1>;
-	snps,mtl-tx-config = <&mtl_tx_setup1>;
-	snps,ps-speed = <1000>;
+&mdio {
+	compatible = "snps,dwmac-mdio";
+	#address-cells = <1>;
+	#size-cells = <0>;

-	status = "okay";
-
-	mtl_rx_setup1: rx-queues-config {
-		snps,rx-queues-to-use = <4>;
-		snps,rx-sched-sp;
-
-		queue0 {
-			snps,dcb-algorithm;
-			snps,map-to-dma-channel = <0x0>;
-			snps,route-up;
-			snps,priority = <0x1>;
-		};
-
-		queue1 {
-			snps,dcb-algorithm;
-			snps,map-to-dma-channel = <0x1>;
-			snps,route-ptp;
-		};
-
-		queue2 {
-			snps,avb-algorithm;
-			snps,map-to-dma-channel = <0x2>;
-			snps,route-avcp;
-		};
-
-		queue3 {
-			snps,avb-algorithm;
-			snps,map-to-dma-channel = <0x3>;
-			snps,priority = <0xc>;
-		};
+	sgmii_phy0: phy@8 {
+		compatible = "ethernet-phy-id0141.0dd4";
+		reg = <0x8>;
+		device_type = "ethernet-phy";
+		interrupts-extended = <&tlmm 7 IRQ_TYPE_EDGE_FALLING>;
+		reset-gpios = <&pmm8654au_2_gpios 8 GPIO_ACTIVE_LOW>;
+		reset-assert-us = <11000>;
+		reset-deassert-us = <70000>;
 	};

-	mtl_tx_setup1: tx-queues-config {
-		snps,tx-queues-to-use = <4>;
-		snps,tx-sched-sp;
-
-		queue0 {
-			snps,dcb-algorithm;
-		};
-
-		queue1 {
-			snps,dcb-algorithm;
-		};
-
-		queue2 {
-			snps,avb-algorithm;
-			snps,send_slope = <0x1000>;
-			snps,idle_slope = <0x1000>;
-			snps,high_credit = <0x3e800>;
-			snps,low_credit = <0xffc18000>;
-		};
-
-		queue3 {
-			snps,avb-algorithm;
-			snps,send_slope = <0x1000>;
-			snps,idle_slope = <0x1000>;
-			snps,high_credit = <0x3e800>;
-			snps,low_credit = <0xffc18000>;
-		};
+	sgmii_phy1: phy@a {
+		compatible = "ethernet-phy-id0141.0dd4";
+		reg = <0xa>;
+		device_type = "ethernet-phy";
+		interrupts-extended = <&tlmm 26 IRQ_TYPE_EDGE_FALLING>;
+		reset-gpios = <&pmm8654au_2_gpios 9 GPIO_ACTIVE_LOW>;
+		reset-assert-us = <11000>;
+		reset-deassert-us = <70000>;
 	};
 };
-
-&i2c11 {
-	clock-frequency = <400000>;
-	pinctrl-0 = <&qup_i2c11_default>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&i2c18 {
-	clock-frequency = <400000>;
-	pinctrl-0 = <&qup_i2c18_default>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&pmm8654au_0_gpios {
-	gpio-line-names = "DS_EN",
-			  "POFF_COMPLETE",
-			  "UFS0_VER_ID",
-			  "FAST_POFF",
-			  "DBU1_PON_DONE",
-			  "AOSS_SLEEP",
-			  "CAM_DES0_EN",
-			  "CAM_DES1_EN",
-			  "CAM_DES2_EN",
-			  "CAM_DES3_EN",
-			  "UEFI",
-			  "ANALOG_PON_OPT";
-};
-
-&pmm8654au_1_gpios {
-	gpio-line-names = "PMIC_C_ID0",
-			  "PMIC_C_ID1",
-			  "UFS1_VER_ID",
-			  "IPA_PWR",
-			  "",
-			  "WLAN_DBU4_EN",
-			  "WLAN_EN",
-			  "BT_EN",
-			  "USB2_PWR_EN",
-			  "USB2_FAULT";
-
-	usb2_en_state: usb2-en-state {
-		pins = "gpio9";
-		function = "normal";
-		output-high;
-		power-source = <0>;
-	};
-};
-
-&pmm8654au_2_gpios {
-	gpio-line-names = "PMIC_E_ID0",
-			  "PMIC_E_ID1",
-			  "USB0_PWR_EN",
-			  "USB0_FAULT",
-			  "SENSOR_IRQ_1",
-			  "SENSOR_IRQ_2",
-			  "SENSOR_RST",
-			  "SGMIIO0_RST",
-			  "SGMIIO1_RST",
-			  "USB1_PWR_ENABLE",
-			  "USB1_FAULT",
-			  "VMON_SPX8";
-
-	usb0_en_state: usb0-en-state {
-		pins = "gpio3";
-		function = "normal";
-		output-high;
-		power-source = <0>;
-	};
-
-	usb1_en_state: usb1-en-state {
-		pins = "gpio10";
-		function = "normal";
-		output-high;
-		power-source = <0>;
-	};
-};
-
-&pmm8654au_3_gpios {
-	gpio-line-names = "PMIC_G_ID0",
-			  "PMIC_G_ID1",
-			  "GNSS_RST",
-			  "GNSS_EN",
-			  "GNSS_BOOT_MODE";
-};
-
-&qupv3_id_1 {
-	status = "okay";
-};
-
-&qupv3_id_2 {
-	status = "okay";
-};
-
-&serdes0 {
-	phy-supply = <&vreg_l5a>;
-	status = "okay";
-};
-
-&serdes1 {
-	phy-supply = <&vreg_l5a>;
-	status = "okay";
-};
-
-&sleep_clk {
-	clock-frequency = <32764>;
-};
-
-&spi16 {
-	pinctrl-0 = <&qup_spi16_default>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&tlmm {
-	ethernet0_default: ethernet0-default-state {
-		ethernet0_mdc: ethernet0-mdc-pins {
-			pins = "gpio8";
-			function = "emac0_mdc";
-			drive-strength = <16>;
-			bias-pull-up;
-		};
-
-		ethernet0_mdio: ethernet0-mdio-pins {
-			pins = "gpio9";
-			function = "emac0_mdio";
-			drive-strength = <16>;
-			bias-pull-up;
-		};
-	};
-
-	qup_uart10_default: qup-uart10-state {
-		pins = "gpio46", "gpio47";
-		function = "qup1_se3";
-	};
-
-	qup_spi16_default: qup-spi16-state {
-		pins = "gpio86", "gpio87", "gpio88", "gpio89";
-		function = "qup2_se2";
-		drive-strength = <6>;
-		bias-disable;
-	};
-
-	qup_i2c11_default: qup-i2c11-state {
-		pins = "gpio48", "gpio49";
-		function = "qup1_se4";
-		drive-strength = <2>;
-		bias-pull-up;
-	};
-
-	qup_i2c18_default: qup-i2c18-state {
-		pins = "gpio95", "gpio96";
-		function = "qup2_se4";
-		drive-strength = <2>;
-		bias-pull-up;
-	};
-
-	qup_uart12_default: qup-uart12-state {
-		qup_uart12_cts: qup-uart12-cts-pins {
-			pins = "gpio52";
-			function = "qup1_se5";
-			bias-disable;
-		};
-
-		qup_uart12_rts: qup-uart12-rts-pins {
-			pins = "gpio53";
-			function = "qup1_se5";
-			bias-pull-down;
-		};
-
-		qup_uart12_tx: qup-uart12-tx-pins {
-			pins = "gpio54";
-			function = "qup1_se5";
-			bias-pull-up;
-		};
-
-		qup_uart12_rx: qup-uart12-rx-pins {
-			pins = "gpio55";
-			function = "qup1_se5";
-			bias-pull-down;
-		};
-	};
-
-	qup_uart17_default: qup-uart17-state {
-		qup_uart17_cts: qup-uart17-cts-pins {
-			pins = "gpio91";
-			function = "qup2_se3";
-			bias-disable;
-		};
-
-		qup_uart17_rts: qup0-uart17-rts-pins {
-			pins = "gpio92";
-			function = "qup2_se3";
-			bias-pull-down;
-		};
-
-		qup_uart17_tx: qup0-uart17-tx-pins {
-			pins = "gpio93";
-			function = "qup2_se3";
-			bias-pull-up;
-		};
-
-		qup_uart17_rx: qup0-uart17-rx-pins {
-			pins = "gpio94";
-			function = "qup2_se3";
-			bias-pull-down;
-		};
-	};
-
-	pcie0_default_state: pcie0-default-state {
-		perst-pins {
-			pins = "gpio2";
-			function = "gpio";
-			drive-strength = <2>;
-			bias-pull-down;
-		};
-
-		clkreq-pins {
-			pins = "gpio1";
-			function = "pcie0_clkreq";
-			drive-strength = <2>;
-			bias-pull-up;
-		};
-
-		wake-pins {
-			pins = "gpio0";
-			function = "gpio";
-			drive-strength = <2>;
-			bias-pull-up;
-		};
-	};
-
-	pcie1_default_state: pcie1-default-state {
-		perst-pins {
-			pins = "gpio4";
-			function = "gpio";
-			drive-strength = <2>;
-			bias-pull-down;
-		};
-
-		clkreq-pins {
-			pins = "gpio3";
-			function = "pcie1_clkreq";
-			drive-strength = <2>;
-			bias-pull-up;
-		};
-
-		wake-pins {
-			pins = "gpio5";
-			function = "gpio";
-			drive-strength = <2>;
-			bias-pull-up;
-		};
-	};
-};
-
-&pcie0 {
-	perst-gpios = <&tlmm 2 GPIO_ACTIVE_LOW>;
-	wake-gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>;
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&pcie0_default_state>;
-
-	status = "okay";
-};
-
-&pcie1 {
-	perst-gpios = <&tlmm 4 GPIO_ACTIVE_LOW>;
-	wake-gpios = <&tlmm 5 GPIO_ACTIVE_HIGH>;
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&pcie1_default_state>;
-
-	status = "okay";
-};
-
-&pcie0_phy {
-	vdda-phy-supply = <&vreg_l5a>;
-	vdda-pll-supply = <&vreg_l1c>;
-
-	status = "okay";
-};
-
-&pcie1_phy {
-	vdda-phy-supply = <&vreg_l5a>;
-	vdda-pll-supply = <&vreg_l1c>;
-
-	status = "okay";
-};
-
-&uart10 {
-	compatible = "qcom,geni-debug-uart";
-	pinctrl-0 = <&qup_uart10_default>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&uart12 {
-	pinctrl-0 = <&qup_uart12_default>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&uart17 {
-	pinctrl-0 = <&qup_uart17_default>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&ufs_mem_hc {
-	reset-gpios = <&tlmm 149 GPIO_ACTIVE_LOW>;
-	vcc-supply = <&vreg_l8a>;
-	vcc-max-microamp = <1100000>;
-	vccq-supply = <&vreg_l4c>;
-	vccq-max-microamp = <1200000>;
-
-	status = "okay";
-};
-
-&ufs_mem_phy {
-	vdda-phy-supply = <&vreg_l4a>;
-	vdda-pll-supply = <&vreg_l1c>;
-
-	status = "okay";
-};
-
-&usb_0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&usb0_en_state>;
-
-	status = "okay";
-};
-
-&usb_0_dwc3 {
-	dr_mode = "peripheral";
-};
-
-&usb_0_hsphy {
-	vdda-pll-supply = <&vreg_l7a>;
-	vdda18-supply = <&vreg_l6c>;
-	vdda33-supply = <&vreg_l9a>;
-
-	status = "okay";
-};
-
-&usb_0_qmpphy {
-	vdda-phy-supply = <&vreg_l1c>;
-	vdda-pll-supply = <&vreg_l7a>;
-
-	status = "okay";
-};
-
-&usb_1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&usb1_en_state>;
-
-	status = "okay";
-};
-
-&usb_1_dwc3 {
-	dr_mode = "host";
-};
-
-&usb_1_hsphy {
-	vdda-pll-supply = <&vreg_l7a>;
-	vdda18-supply = <&vreg_l6c>;
-	vdda33-supply = <&vreg_l9a>;
-
-	status = "okay";
-};
-
-&usb_1_qmpphy {
-	vdda-phy-supply = <&vreg_l1c>;
-	vdda-pll-supply = <&vreg_l7a>;
-
-	status = "okay";
-};
-
-&usb_2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&usb2_en_state>;
-
-	status = "okay";
-};
-
-&usb_2_dwc3 {
-	dr_mode = "host";
-};
-
-&usb_2_hsphy {
-	vdda-pll-supply = <&vreg_l7a>;
-	vdda18-supply = <&vreg_l6c>;
-	vdda33-supply = <&vreg_l9a>;
-
-	status = "okay";
-};
-
-&xo_board_clk {
-	clock-frequency = <38400000>;
-};
--- a/arch/arm64/boot/dts/qcom/sa8775p-ride.dtsi
+++ b/arch/arm64/boot/dts/qcom/sa8775p-ride.dtsi
@ -0,0 +1,814 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023, Linaro Limited
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+
+#include "sa8775p.dtsi"
+#include "sa8775p-pmics.dtsi"
+
+/ {
+	aliases {
+		ethernet0 = &ethernet0;
+		ethernet1 = &ethernet1;
+		i2c11 = &i2c11;
+		i2c18 = &i2c18;
+		serial0 = &uart10;
+		serial1 = &uart12;
+		serial2 = &uart17;
+		spi16 = &spi16;
+		ufshc1 = &ufs_mem_hc;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pmm8654au-rpmh-regulators";
+		qcom,pmic-id = "a";
+
+		vreg_s4a: smps4 {
+			regulator-name = "vreg_s4a";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1816000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s5a: smps5 {
+			regulator-name = "vreg_s5a";
+			regulator-min-microvolt = <1850000>;
+			regulator-max-microvolt = <1996000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s9a: smps9 {
+			regulator-name = "vreg_s9a";
+			regulator-min-microvolt = <535000>;
+			regulator-max-microvolt = <1120000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4a: ldo4 {
+			regulator-name = "vreg_l4a";
+			regulator-min-microvolt = <788000>;
+			regulator-max-microvolt = <1050000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5a: ldo5 {
+			regulator-name = "vreg_l5a";
+			regulator-min-microvolt = <870000>;
+			regulator-max-microvolt = <950000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6a: ldo6 {
+			regulator-name = "vreg_l6a";
+			regulator-min-microvolt = <870000>;
+			regulator-max-microvolt = <970000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7a: ldo7 {
+			regulator-name = "vreg_l7a";
+			regulator-min-microvolt = <720000>;
+			regulator-max-microvolt = <950000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8a: ldo8 {
+			regulator-name = "vreg_l8a";
+			regulator-min-microvolt = <2504000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9a: ldo9 {
+			regulator-name = "vreg_l9a";
+			regulator-min-microvolt = <2970000>;
+			regulator-max-microvolt = <3544000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pmm8654au-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vreg_l1c: ldo1 {
+			regulator-name = "vreg_l1c";
+			regulator-min-microvolt = <1140000>;
+			regulator-max-microvolt = <1260000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2c: ldo2 {
+			regulator-name = "vreg_l2c";
+			regulator-min-microvolt = <900000>;
+			regulator-max-microvolt = <1100000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3c: ldo3 {
+			regulator-name = "vreg_l3c";
+			regulator-min-microvolt = <1100000>;
+			regulator-max-microvolt = <1300000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4c: ldo4 {
+			regulator-name = "vreg_l4c";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			/*
+			 * FIXME: This should have regulator-allow-set-load but
+			 * we're getting an over-current fault from the PMIC
+			 * when switching to LPM.
+			 */
+		};
+
+		vreg_l5c: ldo5 {
+			regulator-name = "vreg_l5c";
+			regulator-min-microvolt = <1100000>;
+			regulator-max-microvolt = <1300000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6c: ldo6 {
+			regulator-name = "vreg_l6c";
+			regulator-min-microvolt = <1620000>;
+			regulator-max-microvolt = <1980000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7c: ldo7 {
+			regulator-name = "vreg_l7c";
+			regulator-min-microvolt = <1620000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8c: ldo8 {
+			regulator-name = "vreg_l8c";
+			regulator-min-microvolt = <2400000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9c: ldo9 {
+			regulator-name = "vreg_l9c";
+			regulator-min-microvolt = <1650000>;
+			regulator-max-microvolt = <2700000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-2 {
+		compatible = "qcom,pmm8654au-rpmh-regulators";
+		qcom,pmic-id = "e";
+
+		vreg_s4e: smps4 {
+			regulator-name = "vreg_s4e";
+			regulator-min-microvolt = <970000>;
+			regulator-max-microvolt = <1520000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s7e: smps7 {
+			regulator-name = "vreg_s7e";
+			regulator-min-microvolt = <1010000>;
+			regulator-max-microvolt = <1170000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s9e: smps9 {
+			regulator-name = "vreg_s9e";
+			regulator-min-microvolt = <300000>;
+			regulator-max-microvolt = <570000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6e: ldo6 {
+			regulator-name = "vreg_l6e";
+			regulator-min-microvolt = <1280000>;
+			regulator-max-microvolt = <1450000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8e: ldo8 {
+			regulator-name = "vreg_l8e";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1950000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+};
+
+&ethernet0 {
+	phy-handle = <&sgmii_phy0>;
+
+	pinctrl-0 = <&ethernet0_default>;
+	pinctrl-names = "default";
+
+	snps,mtl-rx-config = <&mtl_rx_setup>;
+	snps,mtl-tx-config = <&mtl_tx_setup>;
+	snps,ps-speed = <1000>;
+
+	status = "okay";
+
+	mdio: mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+
+	mtl_rx_setup: rx-queues-config {
+		snps,rx-queues-to-use = <4>;
+		snps,rx-sched-sp;
+
+		queue0 {
+			snps,dcb-algorithm;
+			snps,map-to-dma-channel = <0x0>;
+			snps,route-up;
+			snps,priority = <0x1>;
+		};
+
+		queue1 {
+			snps,dcb-algorithm;
+			snps,map-to-dma-channel = <0x1>;
+			snps,route-ptp;
+		};
+
+		queue2 {
+			snps,avb-algorithm;
+			snps,map-to-dma-channel = <0x2>;
+			snps,route-avcp;
+		};
+
+		queue3 {
+			snps,avb-algorithm;
+			snps,map-to-dma-channel = <0x3>;
+			snps,priority = <0xc>;
+		};
+	};
+
+	mtl_tx_setup: tx-queues-config {
+		snps,tx-queues-to-use = <4>;
+		snps,tx-sched-sp;
+
+		queue0 {
+			snps,dcb-algorithm;
+		};
+
+		queue1 {
+			snps,dcb-algorithm;
+		};
+
+		queue2 {
+			snps,avb-algorithm;
+			snps,send_slope = <0x1000>;
+			snps,idle_slope = <0x1000>;
+			snps,high_credit = <0x3e800>;
+			snps,low_credit = <0xffc18000>;
+		};
+
+		queue3 {
+			snps,avb-algorithm;
+			snps,send_slope = <0x1000>;
+			snps,idle_slope = <0x1000>;
+			snps,high_credit = <0x3e800>;
+			snps,low_credit = <0xffc18000>;
+		};
+	};
+};
+
+&ethernet1 {
+	phy-handle = <&sgmii_phy1>;
+
+	snps,mtl-rx-config = <&mtl_rx_setup1>;
+	snps,mtl-tx-config = <&mtl_tx_setup1>;
+	snps,ps-speed = <1000>;
+
+	status = "okay";
+
+	mtl_rx_setup1: rx-queues-config {
+		snps,rx-queues-to-use = <4>;
+		snps,rx-sched-sp;
+
+		queue0 {
+			snps,dcb-algorithm;
+			snps,map-to-dma-channel = <0x0>;
+			snps,route-up;
+			snps,priority = <0x1>;
+		};
+
+		queue1 {
+			snps,dcb-algorithm;
+			snps,map-to-dma-channel = <0x1>;
+			snps,route-ptp;
+		};
+
+		queue2 {
+			snps,avb-algorithm;
+			snps,map-to-dma-channel = <0x2>;
+			snps,route-avcp;
+		};
+
+		queue3 {
+			snps,avb-algorithm;
+			snps,map-to-dma-channel = <0x3>;
+			snps,priority = <0xc>;
+		};
+	};
+
+	mtl_tx_setup1: tx-queues-config {
+		snps,tx-queues-to-use = <4>;
+		snps,tx-sched-sp;
+
+		queue0 {
+			snps,dcb-algorithm;
+		};
+
+		queue1 {
+			snps,dcb-algorithm;
+		};
+
+		queue2 {
+			snps,avb-algorithm;
+			snps,send_slope = <0x1000>;
+			snps,idle_slope = <0x1000>;
+			snps,high_credit = <0x3e800>;
+			snps,low_credit = <0xffc18000>;
+		};
+
+		queue3 {
+			snps,avb-algorithm;
+			snps,send_slope = <0x1000>;
+			snps,idle_slope = <0x1000>;
+			snps,high_credit = <0x3e800>;
+			snps,low_credit = <0xffc18000>;
+		};
+	};
+};
+
+&i2c11 {
+	clock-frequency = <400000>;
+	pinctrl-0 = <&qup_i2c11_default>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&i2c18 {
+	clock-frequency = <400000>;
+	pinctrl-0 = <&qup_i2c18_default>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&pmm8654au_0_gpios {
+	gpio-line-names = "DS_EN",
+			  "POFF_COMPLETE",
+			  "UFS0_VER_ID",
+			  "FAST_POFF",
+			  "DBU1_PON_DONE",
+			  "AOSS_SLEEP",
+			  "CAM_DES0_EN",
+			  "CAM_DES1_EN",
+			  "CAM_DES2_EN",
+			  "CAM_DES3_EN",
+			  "UEFI",
+			  "ANALOG_PON_OPT";
+};
+
+&pmm8654au_0_pon_resin {
+	linux,code = <KEY_VOLUMEDOWN>;
+	status = "okay";
+};
+
+&pmm8654au_1_gpios {
+	gpio-line-names = "PMIC_C_ID0",
+			  "PMIC_C_ID1",
+			  "UFS1_VER_ID",
+			  "IPA_PWR",
+			  "",
+			  "WLAN_DBU4_EN",
+			  "WLAN_EN",
+			  "BT_EN",
+			  "USB2_PWR_EN",
+			  "USB2_FAULT";
+
+	usb2_en_state: usb2-en-state {
+		pins = "gpio9";
+		function = "normal";
+		output-high;
+		power-source = <0>;
+	};
+};
+
+&pmm8654au_2_gpios {
+	gpio-line-names = "PMIC_E_ID0",
+			  "PMIC_E_ID1",
+			  "USB0_PWR_EN",
+			  "USB0_FAULT",
+			  "SENSOR_IRQ_1",
+			  "SENSOR_IRQ_2",
+			  "SENSOR_RST",
+			  "SGMIIO0_RST",
+			  "SGMIIO1_RST",
+			  "USB1_PWR_ENABLE",
+			  "USB1_FAULT",
+			  "VMON_SPX8";
+
+	usb0_en_state: usb0-en-state {
+		pins = "gpio3";
+		function = "normal";
+		output-high;
+		power-source = <0>;
+	};
+
+	usb1_en_state: usb1-en-state {
+		pins = "gpio10";
+		function = "normal";
+		output-high;
+		power-source = <0>;
+	};
+};
+
+&pmm8654au_3_gpios {
+	gpio-line-names = "PMIC_G_ID0",
+			  "PMIC_G_ID1",
+			  "GNSS_RST",
+			  "GNSS_EN",
+			  "GNSS_BOOT_MODE";
+};
+
+&qupv3_id_1 {
+	status = "okay";
+};
+
+&qupv3_id_2 {
+	status = "okay";
+};
+
+&serdes0 {
+	phy-supply = <&vreg_l5a>;
+	status = "okay";
+};
+
+&serdes1 {
+	phy-supply = <&vreg_l5a>;
+	status = "okay";
+};
+
+&sleep_clk {
+	clock-frequency = <32000>;
+};
+
+&spi16 {
+	pinctrl-0 = <&qup_spi16_default>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&tlmm {
+	ethernet0_default: ethernet0-default-state {
+		ethernet0_mdc: ethernet0-mdc-pins {
+			pins = "gpio8";
+			function = "emac0_mdc";
+			drive-strength = <16>;
+			bias-pull-up;
+		};
+
+		ethernet0_mdio: ethernet0-mdio-pins {
+			pins = "gpio9";
+			function = "emac0_mdio";
+			drive-strength = <16>;
+			bias-pull-up;
+		};
+	};
+
+	qup_uart10_default: qup-uart10-state {
+		pins = "gpio46", "gpio47";
+		function = "qup1_se3";
+	};
+
+	qup_spi16_default: qup-spi16-state {
+		pins = "gpio86", "gpio87", "gpio88", "gpio89";
+		function = "qup2_se2";
+		drive-strength = <6>;
+		bias-disable;
+	};
+
+	qup_i2c11_default: qup-i2c11-state {
+		pins = "gpio48", "gpio49";
+		function = "qup1_se4";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+
+	qup_i2c18_default: qup-i2c18-state {
+		pins = "gpio95", "gpio96";
+		function = "qup2_se4";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+
+	qup_uart12_default: qup-uart12-state {
+		qup_uart12_cts: qup-uart12-cts-pins {
+			pins = "gpio52";
+			function = "qup1_se5";
+			bias-disable;
+		};
+
+		qup_uart12_rts: qup-uart12-rts-pins {
+			pins = "gpio53";
+			function = "qup1_se5";
+			bias-pull-down;
+		};
+
+		qup_uart12_tx: qup-uart12-tx-pins {
+			pins = "gpio54";
+			function = "qup1_se5";
+			bias-pull-up;
+		};
+
+		qup_uart12_rx: qup-uart12-rx-pins {
+			pins = "gpio55";
+			function = "qup1_se5";
+			bias-pull-down;
+		};
+	};
+
+	qup_uart17_default: qup-uart17-state {
+		qup_uart17_cts: qup-uart17-cts-pins {
+			pins = "gpio91";
+			function = "qup2_se3";
+			bias-disable;
+		};
+
+		qup_uart17_rts: qup0-uart17-rts-pins {
+			pins = "gpio92";
+			function = "qup2_se3";
+			bias-pull-down;
+		};
+
+		qup_uart17_tx: qup0-uart17-tx-pins {
+			pins = "gpio93";
+			function = "qup2_se3";
+			bias-pull-up;
+		};
+
+		qup_uart17_rx: qup0-uart17-rx-pins {
+			pins = "gpio94";
+			function = "qup2_se3";
+			bias-pull-down;
+		};
+	};
+
+	pcie0_default_state: pcie0-default-state {
+		perst-pins {
+			pins = "gpio2";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+
+		clkreq-pins {
+			pins = "gpio1";
+			function = "pcie0_clkreq";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		wake-pins {
+			pins = "gpio0";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	pcie1_default_state: pcie1-default-state {
+		perst-pins {
+			pins = "gpio4";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+
+		clkreq-pins {
+			pins = "gpio3";
+			function = "pcie1_clkreq";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		wake-pins {
+			pins = "gpio5";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+};
+
+&pcie0 {
+	perst-gpios = <&tlmm 2 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie0_default_state>;
+
+	status = "okay";
+};
+
+&pcie1 {
+	perst-gpios = <&tlmm 4 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 5 GPIO_ACTIVE_HIGH>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie1_default_state>;
+
+	status = "okay";
+};
+
+&pcie0_phy {
+	vdda-phy-supply = <&vreg_l5a>;
+	vdda-pll-supply = <&vreg_l1c>;
+
+	status = "okay";
+};
+
+&pcie1_phy {
+	vdda-phy-supply = <&vreg_l5a>;
+	vdda-pll-supply = <&vreg_l1c>;
+
+	status = "okay";
+};
+
+&uart10 {
+	compatible = "qcom,geni-debug-uart";
+	pinctrl-0 = <&qup_uart10_default>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&uart12 {
+	pinctrl-0 = <&qup_uart12_default>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&uart17 {
+	pinctrl-0 = <&qup_uart17_default>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&ufs_mem_hc {
+	reset-gpios = <&tlmm 149 GPIO_ACTIVE_LOW>;
+	vcc-supply = <&vreg_l8a>;
+	vcc-max-microamp = <1100000>;
+	vccq-supply = <&vreg_l4c>;
+	vccq-max-microamp = <1200000>;
+
+	status = "okay";
+};
+
+&ufs_mem_phy {
+	vdda-phy-supply = <&vreg_l4a>;
+	vdda-pll-supply = <&vreg_l1c>;
+
+	status = "okay";
+};
+
+&usb_0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_en_state>;
+
+	status = "okay";
+};
+
+&usb_0_dwc3 {
+	dr_mode = "peripheral";
+};
+
+&usb_0_hsphy {
+	vdda-pll-supply = <&vreg_l7a>;
+	vdda18-supply = <&vreg_l6c>;
+	vdda33-supply = <&vreg_l9a>;
+
+	status = "okay";
+};
+
+&usb_0_qmpphy {
+	vdda-phy-supply = <&vreg_l1c>;
+	vdda-pll-supply = <&vreg_l7a>;
+
+	status = "okay";
+};
+
+&usb_1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb1_en_state>;
+
+	status = "okay";
+};
+
+&usb_1_dwc3 {
+	dr_mode = "host";
+};
+
+&usb_1_hsphy {
+	vdda-pll-supply = <&vreg_l7a>;
+	vdda18-supply = <&vreg_l6c>;
+	vdda33-supply = <&vreg_l9a>;
+
+	status = "okay";
+};
+
+&usb_1_qmpphy {
+	vdda-phy-supply = <&vreg_l1c>;
+	vdda-pll-supply = <&vreg_l7a>;
+
+	status = "okay";
+};
+
+&usb_2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb2_en_state>;
+
+	status = "okay";
+};
+
+&usb_2_dwc3 {
+	dr_mode = "host";
+};
+
+&usb_2_hsphy {
+	vdda-pll-supply = <&vreg_l7a>;
+	vdda18-supply = <&vreg_l6c>;
+	vdda33-supply = <&vreg_l9a>;
+
+	status = "okay";
+};
+
+&xo_board_clk {
+	clock-frequency = <38400000>;
+};
--- a/arch/arm64/boot/dts/qcom/sc7180-firmware-tfa.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180-firmware-tfa.dtsi
@ -6,82 +6,82 @@
 * by Qualcomm firmware.
 */

-&CPU0 {
+&cpu0 {
 	/delete-property/ power-domains;
 	/delete-property/ power-domain-names;

-	cpu-idle-states = <&LITTLE_CPU_SLEEP_0
-			   &LITTLE_CPU_SLEEP_1
-			   &CLUSTER_SLEEP_0>;
+	cpu-idle-states = <&little_cpu_sleep_0
+			   &little_cpu_sleep_1
+			   &cluster_sleep_0>;
 };

-&CPU1 {
+&cpu1 {
 	/delete-property/ power-domains;
 	/delete-property/ power-domain-names;

-	cpu-idle-states = <&LITTLE_CPU_SLEEP_0
-			   &LITTLE_CPU_SLEEP_1
-			   &CLUSTER_SLEEP_0>;
+	cpu-idle-states = <&little_cpu_sleep_0
+			   &little_cpu_sleep_1
+			   &cluster_sleep_0>;
 };

-&CPU2 {
+&cpu2 {
 	/delete-property/ power-domains;
 	/delete-property/ power-domain-names;

-	cpu-idle-states = <&LITTLE_CPU_SLEEP_0
-			   &LITTLE_CPU_SLEEP_1
-			   &CLUSTER_SLEEP_0>;
+	cpu-idle-states = <&little_cpu_sleep_0
+			   &little_cpu_sleep_1
+			   &cluster_sleep_0>;
 };

-&CPU3 {
+&cpu3 {
 	/delete-property/ power-domains;
 	/delete-property/ power-domain-names;

-	cpu-idle-states = <&LITTLE_CPU_SLEEP_0
-			   &LITTLE_CPU_SLEEP_1
-			   &CLUSTER_SLEEP_0>;
+	cpu-idle-states = <&little_cpu_sleep_0
+			   &little_cpu_sleep_1
+			   &cluster_sleep_0>;
 };

-&CPU4 {
+&cpu4 {
 	/delete-property/ power-domains;
 	/delete-property/ power-domain-names;

-	cpu-idle-states = <&LITTLE_CPU_SLEEP_0
-			   &LITTLE_CPU_SLEEP_1
-			   &CLUSTER_SLEEP_0>;
+	cpu-idle-states = <&little_cpu_sleep_0
+			   &little_cpu_sleep_1
+			   &cluster_sleep_0>;
 };

-&CPU5 {
+&cpu5 {
 	/delete-property/ power-domains;
 	/delete-property/ power-domain-names;

-	cpu-idle-states = <&LITTLE_CPU_SLEEP_0
-			   &LITTLE_CPU_SLEEP_1
-			   &CLUSTER_SLEEP_0>;
+	cpu-idle-states = <&little_cpu_sleep_0
+			   &little_cpu_sleep_1
+			   &cluster_sleep_0>;
 };

-&CPU6 {
+&cpu6 {
 	/delete-property/ power-domains;
 	/delete-property/ power-domain-names;

-	cpu-idle-states = <&BIG_CPU_SLEEP_0
-			   &BIG_CPU_SLEEP_1
-			   &CLUSTER_SLEEP_0>;
+	cpu-idle-states = <&big_cpu_sleep_0
+			   &big_cpu_sleep_1
+			   &cluster_sleep_0>;
 };

-&CPU7 {
+&cpu7 {
 	/delete-property/ power-domains;
 	/delete-property/ power-domain-names;

-	cpu-idle-states = <&BIG_CPU_SLEEP_0
-			   &BIG_CPU_SLEEP_1
-			   &CLUSTER_SLEEP_0>;
+	cpu-idle-states = <&big_cpu_sleep_0
+			   &big_cpu_sleep_1
+			   &cluster_sleep_0>;
 };

 /delete-node/ &domain_idle_states;

 &idle_states {
-	CLUSTER_SLEEP_0: cluster-sleep-0 {
+	cluster_sleep_0: cluster-sleep-0 {
 		compatible = "arm,idle-state";
 		idle-state-name = "cluster-power-down";
 		arm,psci-suspend-param = <0x40003444>;
@ -92,15 +92,15 @@
 	};
 };

-/delete-node/ &CPU_PD0;
-/delete-node/ &CPU_PD1;
-/delete-node/ &CPU_PD2;
-/delete-node/ &CPU_PD3;
-/delete-node/ &CPU_PD4;
-/delete-node/ &CPU_PD5;
-/delete-node/ &CPU_PD6;
-/delete-node/ &CPU_PD7;
-/delete-node/ &CLUSTER_PD;
+/delete-node/ &cpu_pd0;
+/delete-node/ &cpu_pd1;
+/delete-node/ &cpu_pd2;
+/delete-node/ &cpu_pd3;
+/delete-node/ &cpu_pd4;
+/delete-node/ &cpu_pd5;
+/delete-node/ &cpu_pd6;
+/delete-node/ &cpu_pd7;
+/delete-node/ &cluster_pd;

 &apps_rsc {
 	/delete-property/ power-domains;
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz.dtsi
@ -26,7 +26,6 @@
 	thermal-zones {
 		skin_temp_thermal: skin-temp-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <0>;

 			thermal-sensors = <&pm6150_adc_tm 1>;
 			sustainable-power = <965>;
@ -54,14 +53,14 @@
 			cooling-maps {
 				map0 {
 					trip = <&skin_temp_alert0>;
-					cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};

 				map1 {
 					trip = <&skin_temp_alert1>;
-					cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 			};
 		};
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar.dtsi
@ -43,7 +43,6 @@
 	thermal-zones {
 		skin_temp_thermal: skin-temp-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <0>;

 			thermal-sensors = <&pm6150_adc_tm 1>;
 			sustainable-power = <965>;
@ -71,14 +70,14 @@
 			cooling-maps {
 				map0 {
 					trip = <&skin_temp_alert0>;
-					cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};

 				map1 {
 					trip = <&skin_temp_alert1>;
-					cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 			};
 		};
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom.dtsi
@ -12,14 +12,11 @@

 / {
 	thermal-zones {
-		5v-choke-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <250>;
-
+		choke-5v-thermal {
 			thermal-sensors = <&pm6150_adc_tm 1>;

 			trips {
-				5v-choke-crit {
+				choke-5v-crit {
 					temperature = <125000>;
 					hysteresis = <1000>;
 					type = "critical";
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-quackingstick.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-quackingstick.dtsi
@ -84,6 +84,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&lcd_rst>;
 		avdd-supply = <&ppvar_lcd>;
+		avee-supply = <&ppvar_lcd>;
 		pp1800-supply = <&v1p8_disp>;
 		pp3300-supply = <&pp3300_dx_edp>;
 		backlight = <&backlight>;
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler.dtsi
@ -50,7 +50,6 @@
 	thermal-zones {
 		skin_temp_thermal: skin-temp-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <0>;

 			thermal-sensors = <&pm6150_adc_tm 1>;
 			sustainable-power = <574>;
@ -78,14 +77,14 @@
 			cooling-maps {
 				map0 {
 					trip = <&skin_temp_alert0>;
-					cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};

 				map1 {
 					trip = <&skin_temp_alert1>;
-					cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 			};
 		};
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
@ -21,9 +21,6 @@
 / {
 	thermal-zones {
 		charger_thermal: charger-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-
 			thermal-sensors = <&pm6150_adc_tm 0>;

 			trips {
--- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
@ -74,28 +74,28 @@
 		#address-cells = <2>;
 		#size-cells = <0>;

-		CPU0: cpu@0 {
+		cpu0: cpu@0 {
 			device_type = "cpu";
 			compatible = "qcom,kryo468";
 			reg = <0x0 0x0>;
 			clocks = <&cpufreq_hw 0>;
 			enable-method = "psci";
-			power-domains = <&CPU_PD0>;
+			power-domains = <&cpu_pd0>;
 			power-domain-names = "psci";
 			capacity-dmips-mhz = <415>;
 			dynamic-power-coefficient = <137>;
 			operating-points-v2 = <&cpu0_opp_table>;
 			interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>,
 					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
-			next-level-cache = <&L2_0>;
+			next-level-cache = <&l2_0>;
 			#cooling-cells = <2>;
 			qcom,freq-domain = <&cpufreq_hw 0>;
-			L2_0: l2-cache {
+			l2_0: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
 				cache-unified;
-				next-level-cache = <&L3_0>;
-				L3_0: l3-cache {
+				next-level-cache = <&l3_0>;
+				l3_0: l3-cache {
 					compatible = "cache";
 					cache-level = <3>;
 					cache-unified;
@ -103,206 +103,206 @@
 			};
 		};

-		CPU1: cpu@100 {
+		cpu1: cpu@100 {
 			device_type = "cpu";
 			compatible = "qcom,kryo468";
 			reg = <0x0 0x100>;
 			clocks = <&cpufreq_hw 0>;
 			enable-method = "psci";
-			power-domains = <&CPU_PD1>;
+			power-domains = <&cpu_pd1>;
 			power-domain-names = "psci";
 			capacity-dmips-mhz = <415>;
 			dynamic-power-coefficient = <137>;
-			next-level-cache = <&L2_100>;
+			next-level-cache = <&l2_100>;
 			operating-points-v2 = <&cpu0_opp_table>;
 			interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>,
 					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
 			#cooling-cells = <2>;
 			qcom,freq-domain = <&cpufreq_hw 0>;
-			L2_100: l2-cache {
+			l2_100: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
 				cache-unified;
-				next-level-cache = <&L3_0>;
+				next-level-cache = <&l3_0>;
 			};
 		};

-		CPU2: cpu@200 {
+		cpu2: cpu@200 {
 			device_type = "cpu";
 			compatible = "qcom,kryo468";
 			reg = <0x0 0x200>;
 			clocks = <&cpufreq_hw 0>;
 			enable-method = "psci";
-			power-domains = <&CPU_PD2>;
+			power-domains = <&cpu_pd2>;
 			power-domain-names = "psci";
 			capacity-dmips-mhz = <415>;
 			dynamic-power-coefficient = <137>;
-			next-level-cache = <&L2_200>;
+			next-level-cache = <&l2_200>;
 			operating-points-v2 = <&cpu0_opp_table>;
 			interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>,
 					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
 			#cooling-cells = <2>;
 			qcom,freq-domain = <&cpufreq_hw 0>;
-			L2_200: l2-cache {
+			l2_200: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
 				cache-unified;
-				next-level-cache = <&L3_0>;
+				next-level-cache = <&l3_0>;
 			};
 		};

-		CPU3: cpu@300 {
+		cpu3: cpu@300 {
 			device_type = "cpu";
 			compatible = "qcom,kryo468";
 			reg = <0x0 0x300>;
 			clocks = <&cpufreq_hw 0>;
 			enable-method = "psci";
-			power-domains = <&CPU_PD3>;
+			power-domains = <&cpu_pd3>;
 			power-domain-names = "psci";
 			capacity-dmips-mhz = <415>;
 			dynamic-power-coefficient = <137>;
-			next-level-cache = <&L2_300>;
+			next-level-cache = <&l2_300>;
 			operating-points-v2 = <&cpu0_opp_table>;
 			interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>,
 					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
 			#cooling-cells = <2>;
 			qcom,freq-domain = <&cpufreq_hw 0>;
-			L2_300: l2-cache {
+			l2_300: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
 				cache-unified;
-				next-level-cache = <&L3_0>;
+				next-level-cache = <&l3_0>;
 			};
 		};

-		CPU4: cpu@400 {
+		cpu4: cpu@400 {
 			device_type = "cpu";
 			compatible = "qcom,kryo468";
 			reg = <0x0 0x400>;
 			clocks = <&cpufreq_hw 0>;
 			enable-method = "psci";
-			power-domains = <&CPU_PD4>;
+			power-domains = <&cpu_pd4>;
 			power-domain-names = "psci";
 			capacity-dmips-mhz = <415>;
 			dynamic-power-coefficient = <137>;
-			next-level-cache = <&L2_400>;
+			next-level-cache = <&l2_400>;
 			operating-points-v2 = <&cpu0_opp_table>;
 			interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>,
 					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
 			#cooling-cells = <2>;
 			qcom,freq-domain = <&cpufreq_hw 0>;
-			L2_400: l2-cache {
+			l2_400: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
 				cache-unified;
-				next-level-cache = <&L3_0>;
+				next-level-cache = <&l3_0>;
 			};
 		};

-		CPU5: cpu@500 {
+		cpu5: cpu@500 {
 			device_type = "cpu";
 			compatible = "qcom,kryo468";
 			reg = <0x0 0x500>;
 			clocks = <&cpufreq_hw 0>;
 			enable-method = "psci";
-			power-domains = <&CPU_PD5>;
+			power-domains = <&cpu_pd5>;
 			power-domain-names = "psci";
 			capacity-dmips-mhz = <415>;
 			dynamic-power-coefficient = <137>;
-			next-level-cache = <&L2_500>;
+			next-level-cache = <&l2_500>;
 			operating-points-v2 = <&cpu0_opp_table>;
 			interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>,
 					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
 			#cooling-cells = <2>;
 			qcom,freq-domain = <&cpufreq_hw 0>;
-			L2_500: l2-cache {
+			l2_500: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
 				cache-unified;
-				next-level-cache = <&L3_0>;
+				next-level-cache = <&l3_0>;
 			};
 		};

-		CPU6: cpu@600 {
+		cpu6: cpu@600 {
 			device_type = "cpu";
 			compatible = "qcom,kryo468";
 			reg = <0x0 0x600>;
 			clocks = <&cpufreq_hw 1>;
 			enable-method = "psci";
-			power-domains = <&CPU_PD6>;
+			power-domains = <&cpu_pd6>;
 			power-domain-names = "psci";
 			capacity-dmips-mhz = <1024>;
 			dynamic-power-coefficient = <480>;
-			next-level-cache = <&L2_600>;
+			next-level-cache = <&l2_600>;
 			operating-points-v2 = <&cpu6_opp_table>;
 			interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>,
 					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
 			#cooling-cells = <2>;
 			qcom,freq-domain = <&cpufreq_hw 1>;
-			L2_600: l2-cache {
+			l2_600: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
 				cache-unified;
-				next-level-cache = <&L3_0>;
+				next-level-cache = <&l3_0>;
 			};
 		};

-		CPU7: cpu@700 {
+		cpu7: cpu@700 {
 			device_type = "cpu";
 			compatible = "qcom,kryo468";
 			reg = <0x0 0x700>;
 			clocks = <&cpufreq_hw 1>;
 			enable-method = "psci";
-			power-domains = <&CPU_PD7>;
+			power-domains = <&cpu_pd7>;
 			power-domain-names = "psci";
 			capacity-dmips-mhz = <1024>;
 			dynamic-power-coefficient = <480>;
-			next-level-cache = <&L2_700>;
+			next-level-cache = <&l2_700>;
 			operating-points-v2 = <&cpu6_opp_table>;
 			interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>,
 					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
 			#cooling-cells = <2>;
 			qcom,freq-domain = <&cpufreq_hw 1>;
-			L2_700: l2-cache {
+			l2_700: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
 				cache-unified;
-				next-level-cache = <&L3_0>;
+				next-level-cache = <&l3_0>;
 			};
 		};

 		cpu-map {
 			cluster0 {
 				core0 {
-					cpu = <&CPU0>;
+					cpu = <&cpu0>;
 				};

 				core1 {
-					cpu = <&CPU1>;
+					cpu = <&cpu1>;
 				};

 				core2 {
-					cpu = <&CPU2>;
+					cpu = <&cpu2>;
 				};

 				core3 {
-					cpu = <&CPU3>;
+					cpu = <&cpu3>;
 				};

 				core4 {
-					cpu = <&CPU4>;
+					cpu = <&cpu4>;
 				};

 				core5 {
-					cpu = <&CPU5>;
+					cpu = <&cpu5>;
 				};

 				core6 {
-					cpu = <&CPU6>;
+					cpu = <&cpu6>;
 				};

 				core7 {
-					cpu = <&CPU7>;
+					cpu = <&cpu7>;
 				};
 			};
 		};
@ -310,7 +310,7 @@
 		idle_states: idle-states {
 			entry-method = "psci";

-			LITTLE_CPU_SLEEP_0: cpu-sleep-0-0 {
+			little_cpu_sleep_0: cpu-sleep-0-0 {
 				compatible = "arm,idle-state";
 				idle-state-name = "little-power-down";
 				arm,psci-suspend-param = <0x40000003>;
@ -320,7 +320,7 @@
 				local-timer-stop;
 			};

-			LITTLE_CPU_SLEEP_1: cpu-sleep-0-1 {
+			little_cpu_sleep_1: cpu-sleep-0-1 {
 				compatible = "arm,idle-state";
 				idle-state-name = "little-rail-power-down";
 				arm,psci-suspend-param = <0x40000004>;
@ -330,7 +330,7 @@
 				local-timer-stop;
 			};

-			BIG_CPU_SLEEP_0: cpu-sleep-1-0 {
+			big_cpu_sleep_0: cpu-sleep-1-0 {
 				compatible = "arm,idle-state";
 				idle-state-name = "big-power-down";
 				arm,psci-suspend-param = <0x40000003>;
@ -340,7 +340,7 @@
 				local-timer-stop;
 			};

-			BIG_CPU_SLEEP_1: cpu-sleep-1-1 {
+			big_cpu_sleep_1: cpu-sleep-1-1 {
 				compatible = "arm,idle-state";
 				idle-state-name = "big-rail-power-down";
 				arm,psci-suspend-param = <0x40000004>;
@ -352,7 +352,7 @@
 		};

 		domain_idle_states: domain-idle-states {
-			CLUSTER_SLEEP_PC: cluster-sleep-0 {
+			cluster_sleep_pc: cluster-sleep-0 {
 				compatible = "domain-idle-state";
 				idle-state-name = "cluster-l3-power-collapse";
 				arm,psci-suspend-param = <0x41000044>;
@ -361,7 +361,7 @@
 				min-residency-us = <6118>;
 			};

-			CLUSTER_SLEEP_CX_RET: cluster-sleep-1 {
+			cluster_sleep_cx_ret: cluster-sleep-1 {
 				compatible = "domain-idle-state";
 				idle-state-name = "cluster-cx-retention";
 				arm,psci-suspend-param = <0x41001244>;
@ -370,7 +370,7 @@
 				min-residency-us = <8467>;
 			};

-			CLUSTER_AOSS_SLEEP: cluster-sleep-2 {
+			cluster_aoss_sleep: cluster-sleep-2 {
 				compatible = "domain-idle-state";
 				idle-state-name = "cluster-power-down";
 				arm,psci-suspend-param = <0x4100b244>;
@ -580,59 +580,59 @@
 		compatible = "arm,psci-1.0";
 		method = "smc";

-		CPU_PD0: cpu0 {
+		cpu_pd0: power-domain-cpu0 {
 			#power-domain-cells = <0>;
-			power-domains = <&CLUSTER_PD>;
-			domain-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&little_cpu_sleep_0 &little_cpu_sleep_1>;
 		};

-		CPU_PD1: cpu1 {
+		cpu_pd1: power-domain-cpu1 {
 			#power-domain-cells = <0>;
-			power-domains = <&CLUSTER_PD>;
-			domain-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&little_cpu_sleep_0 &little_cpu_sleep_1>;
 		};

-		CPU_PD2: cpu2 {
+		cpu_pd2: power-domain-cpu2 {
 			#power-domain-cells = <0>;
-			power-domains = <&CLUSTER_PD>;
-			domain-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&little_cpu_sleep_0 &little_cpu_sleep_1>;
 		};

-		CPU_PD3: cpu3 {
+		cpu_pd3: power-domain-cpu3 {
 			#power-domain-cells = <0>;
-			power-domains = <&CLUSTER_PD>;
-			domain-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&little_cpu_sleep_0 &little_cpu_sleep_1>;
 		};

-		CPU_PD4: cpu4 {
+		cpu_pd4: power-domain-cpu4 {
 			#power-domain-cells = <0>;
-			power-domains = <&CLUSTER_PD>;
-			domain-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&little_cpu_sleep_0 &little_cpu_sleep_1>;
 		};

-		CPU_PD5: cpu5 {
+		cpu_pd5: power-domain-cpu5 {
 			#power-domain-cells = <0>;
-			power-domains = <&CLUSTER_PD>;
-			domain-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&little_cpu_sleep_0 &little_cpu_sleep_1>;
 		};

-		CPU_PD6: cpu6 {
+		cpu_pd6: power-domain-cpu6 {
 			#power-domain-cells = <0>;
-			power-domains = <&CLUSTER_PD>;
-			domain-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&big_cpu_sleep_0 &big_cpu_sleep_1>;
 		};

-		CPU_PD7: cpu7 {
+		cpu_pd7: power-domain-cpu7 {
 			#power-domain-cells = <0>;
-			power-domains = <&CLUSTER_PD>;
-			domain-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&big_cpu_sleep_0 &big_cpu_sleep_1>;
 		};

-		CLUSTER_PD: cpu-cluster0 {
+		cluster_pd: power-domain-cluster {
 			#power-domain-cells = <0>;
-			domain-idle-states = <&CLUSTER_SLEEP_PC
-					      &CLUSTER_SLEEP_CX_RET
-					      &CLUSTER_AOSS_SLEEP>;
+			domain-idle-states = <&cluster_sleep_pc
+					      &cluster_sleep_cx_ret
+					      &cluster_aoss_sleep>;
 		};
 	};

@ -2465,7 +2465,7 @@
 			compatible = "arm,coresight-etm4x", "arm,primecell";
 			reg = <0 0x07040000 0 0x1000>;

-			cpu = <&CPU0>;
+			cpu = <&cpu0>;

 			clocks = <&aoss_qmp>;
 			clock-names = "apb_pclk";
@ -2485,7 +2485,7 @@
 			compatible = "arm,coresight-etm4x", "arm,primecell";
 			reg = <0 0x07140000 0 0x1000>;

-			cpu = <&CPU1>;
+			cpu = <&cpu1>;

 			clocks = <&aoss_qmp>;
 			clock-names = "apb_pclk";
@ -2505,7 +2505,7 @@
 			compatible = "arm,coresight-etm4x", "arm,primecell";
 			reg = <0 0x07240000 0 0x1000>;

-			cpu = <&CPU2>;
+			cpu = <&cpu2>;

 			clocks = <&aoss_qmp>;
 			clock-names = "apb_pclk";
@ -2525,7 +2525,7 @@
 			compatible = "arm,coresight-etm4x", "arm,primecell";
 			reg = <0 0x07340000 0 0x1000>;

-			cpu = <&CPU3>;
+			cpu = <&cpu3>;

 			clocks = <&aoss_qmp>;
 			clock-names = "apb_pclk";
@ -2545,7 +2545,7 @@
 			compatible = "arm,coresight-etm4x", "arm,primecell";
 			reg = <0 0x07440000 0 0x1000>;

-			cpu = <&CPU4>;
+			cpu = <&cpu4>;

 			clocks = <&aoss_qmp>;
 			clock-names = "apb_pclk";
@ -2565,7 +2565,7 @@
 			compatible = "arm,coresight-etm4x", "arm,primecell";
 			reg = <0 0x07540000 0 0x1000>;

-			cpu = <&CPU5>;
+			cpu = <&cpu5>;

 			clocks = <&aoss_qmp>;
 			clock-names = "apb_pclk";
@ -2585,7 +2585,7 @@
 			compatible = "arm,coresight-etm4x", "arm,primecell";
 			reg = <0 0x07640000 0 0x1000>;

-			cpu = <&CPU6>;
+			cpu = <&cpu6>;

 			clocks = <&aoss_qmp>;
 			clock-names = "apb_pclk";
@ -2605,7 +2605,7 @@
 			compatible = "arm,coresight-etm4x", "arm,primecell";
 			reg = <0 0x07740000 0 0x1000>;

-			cpu = <&CPU7>;
+			cpu = <&cpu7>;

 			clocks = <&aoss_qmp>;
 			clock-names = "apb_pclk";
@ -3645,7 +3645,7 @@
 					  <SLEEP_TCS   3>,
 					  <WAKE_TCS    3>,
 					  <CONTROL_TCS 1>;
-			power-domains = <&CLUSTER_PD>;
+			power-domains = <&cluster_pd>;

 			rpmhcc: clock-controller {
 				compatible = "qcom,sc7180-rpmh-clk";
@ -3827,7 +3827,6 @@
 	thermal-zones {
 		cpu0_thermal: cpu0-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <0>;

 			thermal-sensors = <&tsens0 1>;
 			sustainable-power = <1052>;
@ -3855,28 +3854,27 @@
 			cooling-maps {
 				map0 {
 					trip = <&cpu0_alert0>;
-					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 				map1 {
 					trip = <&cpu0_alert1>;
-					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 			};
 		};

 		cpu1_thermal: cpu1-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <0>;

 			thermal-sensors = <&tsens0 2>;
 			sustainable-power = <1052>;
@ -3904,28 +3902,27 @@
 			cooling-maps {
 				map0 {
 					trip = <&cpu1_alert0>;
-					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 				map1 {
 					trip = <&cpu1_alert1>;
-					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 			};
 		};

 		cpu2_thermal: cpu2-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <0>;

 			thermal-sensors = <&tsens0 3>;
 			sustainable-power = <1052>;
@ -3953,28 +3950,27 @@
 			cooling-maps {
 				map0 {
 					trip = <&cpu2_alert0>;
-					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 				map1 {
 					trip = <&cpu2_alert1>;
-					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 			};
 		};

 		cpu3_thermal: cpu3-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <0>;

 			thermal-sensors = <&tsens0 4>;
 			sustainable-power = <1052>;
@ -4002,28 +3998,27 @@
 			cooling-maps {
 				map0 {
 					trip = <&cpu3_alert0>;
-					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 				map1 {
 					trip = <&cpu3_alert1>;
-					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 			};
 		};

 		cpu4_thermal: cpu4-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <0>;

 			thermal-sensors = <&tsens0 5>;
 			sustainable-power = <1052>;
@ -4051,28 +4046,27 @@
 			cooling-maps {
 				map0 {
 					trip = <&cpu4_alert0>;
-					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 				map1 {
 					trip = <&cpu4_alert1>;
-					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 			};
 		};

 		cpu5_thermal: cpu5-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <0>;

 			thermal-sensors = <&tsens0 6>;
 			sustainable-power = <1052>;
@ -4100,28 +4094,27 @@
 			cooling-maps {
 				map0 {
 					trip = <&cpu5_alert0>;
-					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 				map1 {
 					trip = <&cpu5_alert1>;
-					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 			};
 		};

 		cpu6_thermal: cpu6-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <0>;

 			thermal-sensors = <&tsens0 9>;
 			sustainable-power = <1425>;
@ -4149,20 +4142,19 @@
 			cooling-maps {
 				map0 {
 					trip = <&cpu6_alert0>;
-					cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 				map1 {
 					trip = <&cpu6_alert1>;
-					cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 			};
 		};

 		cpu7_thermal: cpu7-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <0>;

 			thermal-sensors = <&tsens0 10>;
 			sustainable-power = <1425>;
@ -4190,20 +4182,19 @@
 			cooling-maps {
 				map0 {
 					trip = <&cpu7_alert0>;
-					cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 				map1 {
 					trip = <&cpu7_alert1>;
-					cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 			};
 		};

 		cpu8_thermal: cpu8-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <0>;

 			thermal-sensors = <&tsens0 11>;
 			sustainable-power = <1425>;
@ -4231,20 +4222,19 @@
 			cooling-maps {
 				map0 {
 					trip = <&cpu8_alert0>;
-					cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 				map1 {
 					trip = <&cpu8_alert1>;
-					cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 			};
 		};

 		cpu9_thermal: cpu9-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <0>;

 			thermal-sensors = <&tsens0 12>;
 			sustainable-power = <1425>;
@ -4272,20 +4262,19 @@
 			cooling-maps {
 				map0 {
 					trip = <&cpu9_alert0>;
-					cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 				map1 {
 					trip = <&cpu9_alert1>;
-					cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 			};
 		};

 		aoss0-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <0>;

 			thermal-sensors = <&tsens0 0>;

@ -4306,7 +4295,6 @@

 		cpuss0-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <0>;

 			thermal-sensors = <&tsens0 7>;

@ -4326,7 +4314,6 @@

 		cpuss1-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <0>;

 			thermal-sensors = <&tsens0 8>;

@ -4346,7 +4333,6 @@

 		gpuss0-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <0>;

 			thermal-sensors = <&tsens0 13>;

@ -4374,7 +4360,6 @@

 		gpuss1-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <0>;

 			thermal-sensors = <&tsens0 14>;

@ -4402,7 +4387,6 @@

 		aoss1-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <0>;

 			thermal-sensors = <&tsens1 0>;

@ -4423,7 +4407,6 @@

 		cwlan-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <0>;

 			thermal-sensors = <&tsens1 1>;

@ -4444,7 +4427,6 @@

 		audio-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <0>;

 			thermal-sensors = <&tsens1 2>;

@ -4465,7 +4447,6 @@

 		ddr-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <0>;

 			thermal-sensors = <&tsens1 3>;

@ -4486,7 +4467,6 @@

 		q6-hvx-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <0>;

 			thermal-sensors = <&tsens1 4>;

@ -4507,7 +4487,6 @@

 		camera-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <0>;

 			thermal-sensors = <&tsens1 5>;

@ -4528,7 +4507,6 @@

 		mdm-core-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <0>;

 			thermal-sensors = <&tsens1 6>;

@ -4549,7 +4527,6 @@

 		mdm-dsp-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <0>;

 			thermal-sensors = <&tsens1 7>;

@ -4570,7 +4547,6 @@

 		npu-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <0>;

 			thermal-sensors = <&tsens1 8>;

@ -4591,7 +4567,6 @@

 		video-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <0>;

 			thermal-sensors = <&tsens1 9>;

--- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
@ -80,7 +80,7 @@

 		sleep_clk: sleep-clk {
 			compatible = "fixed-clock";
-			clock-frequency = <32000>;
+			clock-frequency = <32764>;
 			#clock-cells = <0>;
 		};
 	};
--- a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
@ -2642,7 +2642,7 @@

 		remoteproc_adsp: remoteproc@3000000 {
 			compatible = "qcom,sc8280xp-adsp-pas";
-			reg = <0 0x03000000 0 0x100>;
+			reg = <0 0x03000000 0 0x10000>;

 			interrupts-extended = <&intc GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>,
 					      <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>,
@ -4399,7 +4399,7 @@

 		remoteproc_nsp0: remoteproc@1b300000 {
 			compatible = "qcom,sc8280xp-nsp0-pas";
-			reg = <0 0x1b300000 0 0x100>;
+			reg = <0 0x1b300000 0 0x10000>;

 			interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_LEVEL_HIGH>,
 					      <&smp2p_nsp0_in 0 IRQ_TYPE_EDGE_RISING>,
@ -4530,7 +4530,7 @@

 		remoteproc_nsp1: remoteproc@21300000 {
 			compatible = "qcom,sc8280xp-nsp1-pas";
-			reg = <0 0x21300000 0 0x100>;
+			reg = <0 0x21300000 0 0x10000>;

 			interrupts-extended = <&intc GIC_SPI 887 IRQ_TYPE_LEVEL_HIGH>,
 					      <&smp2p_nsp1_in 0 IRQ_TYPE_EDGE_RISING>,
--- a/arch/arm64/boot/dts/qcom/sdm845-db845c-navigation-mezzanine.dtso
+++ b/arch/arm64/boot/dts/qcom/sdm845-db845c-navigation-mezzanine.dtso
@ -4,8 +4,10 @@
 */

 /dts-v1/;
+/plugin/;

-#include "sdm845-db845c.dts"
+#include <dt-bindings/clock/qcom,camcc-sdm845.h>
+#include <dt-bindings/gpio/gpio.h>

 &camss {
 	vdda-phy-supply = <&vreg_l1a_0p875>;
@ -28,6 +30,9 @@
 };

 &cci_i2c0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
 	camera@10 {
 		compatible = "ovti,ov8856";
 		reg = <0x10>;
@ -63,42 +68,3 @@
 		};
 	};
 };
-
-&cci_i2c1 {
-	camera@60 {
-		compatible = "ovti,ov7251";
-
-		/* I2C address as per ov7251.txt linux documentation */
-		reg = <0x60>;
-
-		/* CAM3_RST_N */
-		enable-gpios = <&tlmm 21 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&cam3_default>;
-
-		clocks = <&clock_camcc CAM_CC_MCLK3_CLK>;
-		clock-names = "xclk";
-		clock-frequency = <24000000>;
-
-		/*
-		 * The &vreg_s4a_1p8 trace always powered on.
-		 *
-		 * The 2.8V vdda-supply regulator is enabled when the
-		 * vreg_s4a_1p8 trace is pulled high.
-		 * It too is represented by a fixed regulator.
-		 *
-		 * No 1.2V vddd-supply regulator is used.
-		 */
-		vdddo-supply = <&vreg_lvs1a_1p8>;
-		vdda-supply = <&cam3_avdd_2v8>;
-
-		status = "disabled";
-
-		port {
-			ov7251_ep: endpoint {
-				data-lanes = <0 1>;
-/*				remote-endpoint = <&csiphy3_ep>; */
-			};
-		};
-	};
-};
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@ -4244,16 +4244,16 @@
 				"vfe1",
 				"vfe_lite";

-			interrupts = <GIC_SPI 464 IRQ_TYPE_LEVEL_HIGH>,
-				<GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>,
-				<GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>,
-				<GIC_SPI 477 IRQ_TYPE_LEVEL_HIGH>,
-				<GIC_SPI 478 IRQ_TYPE_LEVEL_HIGH>,
-				<GIC_SPI 479 IRQ_TYPE_LEVEL_HIGH>,
-				<GIC_SPI 448 IRQ_TYPE_LEVEL_HIGH>,
-				<GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>,
-				<GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>,
-				<GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 464 IRQ_TYPE_EDGE_RISING>,
+				<GIC_SPI 466 IRQ_TYPE_EDGE_RISING>,
+				<GIC_SPI 468 IRQ_TYPE_EDGE_RISING>,
+				<GIC_SPI 477 IRQ_TYPE_EDGE_RISING>,
+				<GIC_SPI 478 IRQ_TYPE_EDGE_RISING>,
+				<GIC_SPI 479 IRQ_TYPE_EDGE_RISING>,
+				<GIC_SPI 448 IRQ_TYPE_EDGE_RISING>,
+				<GIC_SPI 465 IRQ_TYPE_EDGE_RISING>,
+				<GIC_SPI 467 IRQ_TYPE_EDGE_RISING>,
+				<GIC_SPI 469 IRQ_TYPE_EDGE_RISING>;
 			interrupt-names = "csid0",
 				"csid1",
 				"csid2",
--- a/arch/arm64/boot/dts/qcom/sdx75.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdx75.dtsi
@ -29,7 +29,7 @@

 		sleep_clk: sleep-clk {
 			compatible = "fixed-clock";
-			clock-frequency = <32000>;
+			clock-frequency = <32764>;
 			#clock-cells = <0>;
 		};
 	};
--- a/arch/arm64/boot/dts/qcom/sm4450.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm4450.dtsi
@ -23,7 +23,7 @@

 		sleep_clk: sleep-clk {
 			compatible = "fixed-clock";
-			clock-frequency = <32000>;
+			clock-frequency = <32764>;
 			#clock-cells = <0>;
 		};
 	};
--- a/arch/arm64/boot/dts/qcom/sm6115.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm6115.dtsi
@ -1667,7 +1667,7 @@

 		remoteproc_mpss: remoteproc@6080000 {
 			compatible = "qcom,sm6115-mpss-pas";
-			reg = <0x0 0x06080000 0x0 0x100>;
+			reg = <0x0 0x06080000 0x0 0x10000>;

 			interrupts-extended = <&intc GIC_SPI 307 IRQ_TYPE_EDGE_RISING>,
 					      <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
@ -2310,9 +2310,9 @@
 			};
 		};

-		remoteproc_adsp: remoteproc@ab00000 {
+		remoteproc_adsp: remoteproc@a400000 {
 			compatible = "qcom,sm6115-adsp-pas";
-			reg = <0x0 0x0ab00000 0x0 0x100>;
+			reg = <0x0 0x0a400000 0x0 0x4040>;

 			interrupts-extended = <&intc GIC_SPI 282 IRQ_TYPE_EDGE_RISING>,
 					      <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
@ -2384,7 +2384,7 @@

 		remoteproc_cdsp: remoteproc@b300000 {
 			compatible = "qcom,sm6115-cdsp-pas";
-			reg = <0x0 0x0b300000 0x0 0x100000>;
+			reg = <0x0 0x0b300000 0x0 0x4040>;

 			interrupts-extended = <&intc GIC_SPI 265 IRQ_TYPE_EDGE_RISING>,
 					      <&cdsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
--- a/arch/arm64/boot/dts/qcom/sm6125.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm6125.dtsi
@ -28,7 +28,7 @@
 		sleep_clk: sleep-clk {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
-			clock-frequency = <32000>;
+			clock-frequency = <32764>;
 			clock-output-names = "sleep_clk";
 		};
 	};
--- a/arch/arm64/boot/dts/qcom/sm6350.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm6350.dtsi
@ -935,7 +935,7 @@
 				power-domains = <&rpmhpd SM6350_CX>;
 				operating-points-v2 = <&qup_opp_table>;
 				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
-						<&aggre1_noc MASTER_QUP_0 0 &clk_virt SLAVE_EBI_CH0 0>;
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>;
 				interconnect-names = "qup-core", "qup-config";
 				status = "disabled";
 			};
@ -1259,7 +1259,7 @@

 		adsp: remoteproc@3000000 {
 			compatible = "qcom,sm6350-adsp-pas";
-			reg = <0 0x03000000 0 0x100>;
+			reg = <0x0 0x03000000 0x0 0x10000>;

 			interrupts-extended = <&pdc 6 IRQ_TYPE_LEVEL_HIGH>,
 					      <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>,
@ -1480,7 +1480,7 @@

 		mpss: remoteproc@4080000 {
 			compatible = "qcom,sm6350-mpss-pas";
-			reg = <0x0 0x04080000 0x0 0x4040>;
+			reg = <0x0 0x04080000 0x0 0x10000>;

 			interrupts-extended = <&intc GIC_SPI 136 IRQ_TYPE_EDGE_RISING>,
 					      <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
--- a/arch/arm64/boot/dts/qcom/sm6375.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm6375.dtsi
@ -29,7 +29,7 @@

 		sleep_clk: sleep-clk {
 			compatible = "fixed-clock";
-			clock-frequency = <32000>;
+			clock-frequency = <32764>;
 			#clock-cells = <0>;
 		};
 	};
@ -1471,9 +1471,9 @@
 			#power-domain-cells = <1>;
 		};

-		remoteproc_mss: remoteproc@6000000 {
+		remoteproc_mss: remoteproc@6080000 {
 			compatible = "qcom,sm6375-mpss-pas";
-			reg = <0 0x06000000 0 0x4040>;
+			reg = <0x0 0x06080000 0x0 0x10000>;

 			interrupts-extended = <&intc GIC_SPI 307 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_modem_in 0 IRQ_TYPE_EDGE_RISING>,
@ -1514,7 +1514,7 @@

 		remoteproc_adsp: remoteproc@a400000 {
 			compatible = "qcom,sm6375-adsp-pas";
-			reg = <0 0x0a400000 0 0x100>;
+			reg = <0 0x0a400000 0 0x10000>;

 			interrupts-extended = <&intc GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>,
 					      <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>,
@ -1550,9 +1550,9 @@
 			};
 		};

-		remoteproc_cdsp: remoteproc@b000000 {
+		remoteproc_cdsp: remoteproc@b300000 {
 			compatible = "qcom,sm6375-cdsp-pas";
-			reg = <0x0 0x0b000000 0x0 0x100000>;
+			reg = <0x0 0x0b300000 0x0 0x10000>;

 			interrupts-extended = <&intc GIC_SPI 265 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_cdsp_in 0 IRQ_TYPE_EDGE_RISING>,
--- a/arch/arm64/boot/dts/qcom/sm7125.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm7125.dtsi
@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2021, The Linux Foundation. All rights reserved.
+ */
+
+#include "sc7180.dtsi"
+
+/* SM7125 uses Kryo 465 instead of Kryo 468 */
+&cpu0 { compatible = "qcom,kryo465"; };
+&cpu1 { compatible = "qcom,kryo465"; };
+&cpu2 { compatible = "qcom,kryo465"; };
+&cpu3 { compatible = "qcom,kryo465"; };
+&cpu4 { compatible = "qcom,kryo465"; };
+&cpu5 { compatible = "qcom,kryo465"; };
+&cpu6 { compatible = "qcom,kryo465"; };
+&cpu7 { compatible = "qcom,kryo465"; };
--- a/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts
+++ b/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts
@ -26,7 +26,7 @@
 	chassis-type = "handset";

 	/* required for bootloader to select correct board */
-	qcom,msm-id = <434 0x10000>, <459 0x10000>;
+	qcom,msm-id = <459 0x10000>;
 	qcom,board-id = <8 32>;

 	aliases {
--- a/arch/arm64/boot/dts/qcom/sm8150-microsoft-surface-duo.dts
+++ b/arch/arm64/boot/dts/qcom/sm8150-microsoft-surface-duo.dts
@ -376,8 +376,8 @@
 		pinctrl-0 = <&da7280_intr_default>;

 		dlg,actuator-type = "LRA";
-		dlg,dlg,const-op-mode = <1>;
-		dlg,dlg,periodic-op-mode = <1>;
+		dlg,const-op-mode = <1>;
+		dlg,periodic-op-mode = <1>;
 		dlg,nom-microvolt = <2000000>;
 		dlg,abs-max-microvolt = <2000000>;
 		dlg,imax-microamp = <129000>;
--- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
@ -85,7 +85,7 @@

 		sleep_clk: sleep-clk {
 			compatible = "fixed-clock";
-			clock-frequency = <32768>;
+			clock-frequency = <32764>;
 			#clock-cells = <0>;
 		};
 	};
@ -4121,20 +4121,20 @@
 				    "vfe_lite0",
 				    "vfe_lite1";

-			interrupts = <GIC_SPI 477 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 478 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 479 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 448 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 464 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 477 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 478 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 479 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 448 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 86 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 89 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 464 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 466 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 468 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 359 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 465 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 467 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 469 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 360 IRQ_TYPE_EDGE_RISING>;
 			interrupt-names = "csiphy0",
 					  "csiphy1",
 					  "csiphy2",
--- a/arch/arm64/boot/dts/qcom/sm8350.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi
@ -40,7 +40,7 @@

 		sleep_clk: sleep-clk {
 			compatible = "fixed-clock";
-			clock-frequency = <32000>;
+			clock-frequency = <32764>;
 			#clock-cells = <0>;
 		};
 	};
@ -1819,6 +1819,142 @@
 			#hwlock-cells = <1>;
 		};

+		adsp: remoteproc@3000000 {
+			compatible = "qcom,sm8350-adsp-pas";
+			reg = <0x0 0x03000000 0x0 0x10000>;
+
+			interrupts-extended = <&pdc 6 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready",
+					  "handover", "stop-ack";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "xo";
+
+			power-domains = <&rpmhpd RPMHPD_LCX>,
+					<&rpmhpd RPMHPD_LMX>;
+			power-domain-names = "lcx", "lmx";
+
+			memory-region = <&pil_adsp_mem>;
+
+			qcom,qmp = <&aoss_qmp>;
+
+			qcom,smem-states = <&smp2p_adsp_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
+							     IPCC_MPROC_SIGNAL_GLINK_QMP
+							     IRQ_TYPE_EDGE_RISING>;
+				mboxes = <&ipcc IPCC_CLIENT_LPASS
+						IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+				label = "lpass";
+				qcom,remote-pid = <2>;
+
+				apr {
+					compatible = "qcom,apr-v2";
+					qcom,glink-channels = "apr_audio_svc";
+					qcom,domain = <APR_DOMAIN_ADSP>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					service@3 {
+						reg = <APR_SVC_ADSP_CORE>;
+						compatible = "qcom,q6core";
+						qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
+					};
+
+					q6afe: service@4 {
+						compatible = "qcom,q6afe";
+						reg = <APR_SVC_AFE>;
+						qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
+
+						q6afedai: dais {
+							compatible = "qcom,q6afe-dais";
+							#address-cells = <1>;
+							#size-cells = <0>;
+							#sound-dai-cells = <1>;
+						};
+
+						q6afecc: clock-controller {
+							compatible = "qcom,q6afe-clocks";
+							#clock-cells = <2>;
+						};
+					};
+
+					q6asm: service@7 {
+						compatible = "qcom,q6asm";
+						reg = <APR_SVC_ASM>;
+						qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
+
+						q6asmdai: dais {
+							compatible = "qcom,q6asm-dais";
+							#address-cells = <1>;
+							#size-cells = <0>;
+							#sound-dai-cells = <1>;
+							iommus = <&apps_smmu 0x1801 0x0>;
+
+							dai@0 {
+								reg = <0>;
+							};
+
+							dai@1 {
+								reg = <1>;
+							};
+
+							dai@2 {
+								reg = <2>;
+							};
+						};
+					};
+
+					q6adm: service@8 {
+						compatible = "qcom,q6adm";
+						reg = <APR_SVC_ADM>;
+						qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
+
+						q6routing: routing {
+							compatible = "qcom,q6adm-routing";
+							#sound-dai-cells = <0>;
+						};
+					};
+				};
+
+				fastrpc {
+					compatible = "qcom,fastrpc";
+					qcom,glink-channels = "fastrpcglink-apps-dsp";
+					label = "adsp";
+					qcom,non-secure-domain;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					compute-cb@3 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <3>;
+						iommus = <&apps_smmu 0x1803 0x0>;
+					};
+
+					compute-cb@4 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <4>;
+						iommus = <&apps_smmu 0x1804 0x0>;
+					};
+
+					compute-cb@5 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <5>;
+						iommus = <&apps_smmu 0x1805 0x0>;
+					};
+				};
+			};
+		};
+
 		lpass_tlmm: pinctrl@33c0000 {
 			compatible = "qcom,sm8350-lpass-lpi-pinctrl";
 			reg = <0 0x033c0000 0 0x20000>,
@ -2020,7 +2156,7 @@

 		mpss: remoteproc@4080000 {
 			compatible = "qcom,sm8350-mpss-pas";
-			reg = <0x0 0x04080000 0x0 0x4040>;
+			reg = <0x0 0x04080000 0x0 0x10000>;

 			interrupts-extended = <&intc GIC_SPI 264 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_modem_in 0 IRQ_TYPE_EDGE_RISING>,
@ -2299,6 +2435,115 @@
 			qcom,bcm-voters = <&apps_bcm_voter>;
 		};

+		cdsp: remoteproc@a300000 {
+			compatible = "qcom,sm8350-cdsp-pas";
+			reg = <0x0 0x0a300000 0x0 0x10000>;
+
+			interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_cdsp_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_cdsp_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_cdsp_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_cdsp_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready",
+					  "handover", "stop-ack";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "xo";
+
+			power-domains = <&rpmhpd RPMHPD_CX>,
+					<&rpmhpd RPMHPD_MXC>;
+			power-domain-names = "cx", "mxc";
+
+			interconnects = <&compute_noc MASTER_CDSP_PROC 0 &mc_virt SLAVE_EBI1 0>;
+
+			memory-region = <&pil_cdsp_mem>;
+
+			qcom,qmp = <&aoss_qmp>;
+
+			qcom,smem-states = <&smp2p_cdsp_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts-extended = <&ipcc IPCC_CLIENT_CDSP
+							     IPCC_MPROC_SIGNAL_GLINK_QMP
+							     IRQ_TYPE_EDGE_RISING>;
+				mboxes = <&ipcc IPCC_CLIENT_CDSP
+						IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+				label = "cdsp";
+				qcom,remote-pid = <5>;
+
+				fastrpc {
+					compatible = "qcom,fastrpc";
+					qcom,glink-channels = "fastrpcglink-apps-dsp";
+					label = "cdsp";
+					qcom,non-secure-domain;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					compute-cb@1 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <1>;
+						iommus = <&apps_smmu 0x2161 0x0400>,
+							 <&apps_smmu 0x1181 0x0420>;
+					};
+
+					compute-cb@2 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <2>;
+						iommus = <&apps_smmu 0x2162 0x0400>,
+							 <&apps_smmu 0x1182 0x0420>;
+					};
+
+					compute-cb@3 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <3>;
+						iommus = <&apps_smmu 0x2163 0x0400>,
+							 <&apps_smmu 0x1183 0x0420>;
+					};
+
+					compute-cb@4 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <4>;
+						iommus = <&apps_smmu 0x2164 0x0400>,
+							 <&apps_smmu 0x1184 0x0420>;
+					};
+
+					compute-cb@5 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <5>;
+						iommus = <&apps_smmu 0x2165 0x0400>,
+							 <&apps_smmu 0x1185 0x0420>;
+					};
+
+					compute-cb@6 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <6>;
+						iommus = <&apps_smmu 0x2166 0x0400>,
+							 <&apps_smmu 0x1186 0x0420>;
+					};
+
+					compute-cb@7 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <7>;
+						iommus = <&apps_smmu 0x2167 0x0400>,
+							 <&apps_smmu 0x1187 0x0420>;
+					};
+
+					compute-cb@8 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <8>;
+						iommus = <&apps_smmu 0x2168 0x0400>,
+							 <&apps_smmu 0x1188 0x0420>;
+					};
+
+					/* note: secure cb9 in downstream */
+				};
+			};
+		};
+
 		usb_1: usb@a6f8800 {
 			compatible = "qcom,sm8350-dwc3", "qcom,dwc3";
 			reg = <0 0x0a6f8800 0 0x400>;
@ -3204,142 +3449,6 @@
 				     <GIC_SPI 707 IRQ_TYPE_LEVEL_HIGH>;
 		};

-		adsp: remoteproc@17300000 {
-			compatible = "qcom,sm8350-adsp-pas";
-			reg = <0 0x17300000 0 0x100>;
-
-			interrupts-extended = <&pdc 6 IRQ_TYPE_EDGE_RISING>,
-					      <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>,
-					      <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>,
-					      <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>,
-					      <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>;
-			interrupt-names = "wdog", "fatal", "ready",
-					  "handover", "stop-ack";
-
-			clocks = <&rpmhcc RPMH_CXO_CLK>;
-			clock-names = "xo";
-
-			power-domains = <&rpmhpd RPMHPD_LCX>,
-					<&rpmhpd RPMHPD_LMX>;
-			power-domain-names = "lcx", "lmx";
-
-			memory-region = <&pil_adsp_mem>;
-
-			qcom,qmp = <&aoss_qmp>;
-
-			qcom,smem-states = <&smp2p_adsp_out 0>;
-			qcom,smem-state-names = "stop";
-
-			status = "disabled";
-
-			glink-edge {
-				interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
-							     IPCC_MPROC_SIGNAL_GLINK_QMP
-							     IRQ_TYPE_EDGE_RISING>;
-				mboxes = <&ipcc IPCC_CLIENT_LPASS
-						IPCC_MPROC_SIGNAL_GLINK_QMP>;
-
-				label = "lpass";
-				qcom,remote-pid = <2>;
-
-				apr {
-					compatible = "qcom,apr-v2";
-					qcom,glink-channels = "apr_audio_svc";
-					qcom,domain = <APR_DOMAIN_ADSP>;
-					#address-cells = <1>;
-					#size-cells = <0>;
-
-					service@3 {
-						reg = <APR_SVC_ADSP_CORE>;
-						compatible = "qcom,q6core";
-						qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
-					};
-
-					q6afe: service@4 {
-						compatible = "qcom,q6afe";
-						reg = <APR_SVC_AFE>;
-						qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
-
-						q6afedai: dais {
-							compatible = "qcom,q6afe-dais";
-							#address-cells = <1>;
-							#size-cells = <0>;
-							#sound-dai-cells = <1>;
-						};
-
-						q6afecc: clock-controller {
-							compatible = "qcom,q6afe-clocks";
-							#clock-cells = <2>;
-						};
-					};
-
-					q6asm: service@7 {
-						compatible = "qcom,q6asm";
-						reg = <APR_SVC_ASM>;
-						qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
-
-						q6asmdai: dais {
-							compatible = "qcom,q6asm-dais";
-							#address-cells = <1>;
-							#size-cells = <0>;
-							#sound-dai-cells = <1>;
-							iommus = <&apps_smmu 0x1801 0x0>;
-
-							dai@0 {
-								reg = <0>;
-							};
-
-							dai@1 {
-								reg = <1>;
-							};
-
-							dai@2 {
-								reg = <2>;
-							};
-						};
-					};
-
-					q6adm: service@8 {
-						compatible = "qcom,q6adm";
-						reg = <APR_SVC_ADM>;
-						qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
-
-						q6routing: routing {
-							compatible = "qcom,q6adm-routing";
-							#sound-dai-cells = <0>;
-						};
-					};
-				};
-
-				fastrpc {
-					compatible = "qcom,fastrpc";
-					qcom,glink-channels = "fastrpcglink-apps-dsp";
-					label = "adsp";
-					qcom,non-secure-domain;
-					#address-cells = <1>;
-					#size-cells = <0>;
-
-					compute-cb@3 {
-						compatible = "qcom,fastrpc-compute-cb";
-						reg = <3>;
-						iommus = <&apps_smmu 0x1803 0x0>;
-					};
-
-					compute-cb@4 {
-						compatible = "qcom,fastrpc-compute-cb";
-						reg = <4>;
-						iommus = <&apps_smmu 0x1804 0x0>;
-					};
-
-					compute-cb@5 {
-						compatible = "qcom,fastrpc-compute-cb";
-						reg = <5>;
-						iommus = <&apps_smmu 0x1805 0x0>;
-					};
-				};
-			};
-		};
-
 		intc: interrupt-controller@17a00000 {
 			compatible = "arm,gic-v3";
 			#interrupt-cells = <3>;
@ -3508,115 +3617,6 @@
 			#freq-domain-cells = <1>;
 			#clock-cells = <1>;
 		};
-
-		cdsp: remoteproc@98900000 {
-			compatible = "qcom,sm8350-cdsp-pas";
-			reg = <0 0x98900000 0 0x1400000>;
-
-			interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_EDGE_RISING>,
-					      <&smp2p_cdsp_in 0 IRQ_TYPE_EDGE_RISING>,
-					      <&smp2p_cdsp_in 1 IRQ_TYPE_EDGE_RISING>,
-					      <&smp2p_cdsp_in 2 IRQ_TYPE_EDGE_RISING>,
-					      <&smp2p_cdsp_in 3 IRQ_TYPE_EDGE_RISING>;
-			interrupt-names = "wdog", "fatal", "ready",
-					  "handover", "stop-ack";
-
-			clocks = <&rpmhcc RPMH_CXO_CLK>;
-			clock-names = "xo";
-
-			power-domains = <&rpmhpd RPMHPD_CX>,
-					<&rpmhpd RPMHPD_MXC>;
-			power-domain-names = "cx", "mxc";
-
-			interconnects = <&compute_noc MASTER_CDSP_PROC 0 &mc_virt SLAVE_EBI1 0>;
-
-			memory-region = <&pil_cdsp_mem>;
-
-			qcom,qmp = <&aoss_qmp>;
-
-			qcom,smem-states = <&smp2p_cdsp_out 0>;
-			qcom,smem-state-names = "stop";
-
-			status = "disabled";
-
-			glink-edge {
-				interrupts-extended = <&ipcc IPCC_CLIENT_CDSP
-							     IPCC_MPROC_SIGNAL_GLINK_QMP
-							     IRQ_TYPE_EDGE_RISING>;
-				mboxes = <&ipcc IPCC_CLIENT_CDSP
-						IPCC_MPROC_SIGNAL_GLINK_QMP>;
-
-				label = "cdsp";
-				qcom,remote-pid = <5>;
-
-				fastrpc {
-					compatible = "qcom,fastrpc";
-					qcom,glink-channels = "fastrpcglink-apps-dsp";
-					label = "cdsp";
-					qcom,non-secure-domain;
-					#address-cells = <1>;
-					#size-cells = <0>;
-
-					compute-cb@1 {
-						compatible = "qcom,fastrpc-compute-cb";
-						reg = <1>;
-						iommus = <&apps_smmu 0x2161 0x0400>,
-							 <&apps_smmu 0x1181 0x0420>;
-					};
-
-					compute-cb@2 {
-						compatible = "qcom,fastrpc-compute-cb";
-						reg = <2>;
-						iommus = <&apps_smmu 0x2162 0x0400>,
-							 <&apps_smmu 0x1182 0x0420>;
-					};
-
-					compute-cb@3 {
-						compatible = "qcom,fastrpc-compute-cb";
-						reg = <3>;
-						iommus = <&apps_smmu 0x2163 0x0400>,
-							 <&apps_smmu 0x1183 0x0420>;
-					};
-
-					compute-cb@4 {
-						compatible = "qcom,fastrpc-compute-cb";
-						reg = <4>;
-						iommus = <&apps_smmu 0x2164 0x0400>,
-							 <&apps_smmu 0x1184 0x0420>;
-					};
-
-					compute-cb@5 {
-						compatible = "qcom,fastrpc-compute-cb";
-						reg = <5>;
-						iommus = <&apps_smmu 0x2165 0x0400>,
-							 <&apps_smmu 0x1185 0x0420>;
-					};
-
-					compute-cb@6 {
-						compatible = "qcom,fastrpc-compute-cb";
-						reg = <6>;
-						iommus = <&apps_smmu 0x2166 0x0400>,
-							 <&apps_smmu 0x1186 0x0420>;
-					};
-
-					compute-cb@7 {
-						compatible = "qcom,fastrpc-compute-cb";
-						reg = <7>;
-						iommus = <&apps_smmu 0x2167 0x0400>,
-							 <&apps_smmu 0x1187 0x0420>;
-					};
-
-					compute-cb@8 {
-						compatible = "qcom,fastrpc-compute-cb";
-						reg = <8>;
-						iommus = <&apps_smmu 0x2168 0x0400>,
-							 <&apps_smmu 0x1188 0x0420>;
-					};
-
-					/* note: secure cb9 in downstream */
-				};
-			};
-		};
 	};

 	thermal_zones: thermal-zones {
--- a/arch/arm64/boot/dts/qcom/sm8450.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi
@ -40,7 +40,7 @@
 		sleep_clk: sleep-clk {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
-			clock-frequency = <32000>;
+			clock-frequency = <32764>;
 		};
 	};

@ -2135,6 +2135,7 @@
 					compatible = "qcom,fastrpc";
 					qcom,glink-channels = "fastrpcglink-apps-dsp";
 					label = "sdsp";
+					qcom,non-secure-domain;
 					#address-cells = <1>;
 					#size-cells = <0>;

@ -2160,6 +2161,112 @@
 			};
 		};

+		remoteproc_adsp: remoteproc@3000000 {
+			compatible = "qcom,sm8450-adsp-pas";
+			reg = <0x0 0x03000000 0x0 0x10000>;
+
+			interrupts-extended = <&pdc 6 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready",
+					  "handover", "stop-ack";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "xo";
+
+			power-domains = <&rpmhpd RPMHPD_LCX>,
+					<&rpmhpd RPMHPD_LMX>;
+			power-domain-names = "lcx", "lmx";
+
+			memory-region = <&adsp_mem>;
+
+			qcom,qmp = <&aoss_qmp>;
+
+			qcom,smem-states = <&smp2p_adsp_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			remoteproc_adsp_glink: glink-edge {
+				interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
+							     IPCC_MPROC_SIGNAL_GLINK_QMP
+							     IRQ_TYPE_EDGE_RISING>;
+				mboxes = <&ipcc IPCC_CLIENT_LPASS
+						IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+				label = "lpass";
+				qcom,remote-pid = <2>;
+
+				gpr {
+					compatible = "qcom,gpr";
+					qcom,glink-channels = "adsp_apps";
+					qcom,domain = <GPR_DOMAIN_ID_ADSP>;
+					qcom,intents = <512 20>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					q6apm: service@1 {
+						compatible = "qcom,q6apm";
+						reg = <GPR_APM_MODULE_IID>;
+						#sound-dai-cells = <0>;
+						qcom,protection-domain = "avs/audio",
+									 "msm/adsp/audio_pd";
+
+						q6apmdai: dais {
+							compatible = "qcom,q6apm-dais";
+							iommus = <&apps_smmu 0x1801 0x0>;
+						};
+
+						q6apmbedai: bedais {
+							compatible = "qcom,q6apm-lpass-dais";
+							#sound-dai-cells = <1>;
+						};
+					};
+
+					q6prm: service@2 {
+						compatible = "qcom,q6prm";
+						reg = <GPR_PRM_MODULE_IID>;
+						qcom,protection-domain = "avs/audio",
+									 "msm/adsp/audio_pd";
+
+						q6prmcc: clock-controller {
+							compatible = "qcom,q6prm-lpass-clocks";
+							#clock-cells = <2>;
+						};
+					};
+				};
+
+				fastrpc {
+					compatible = "qcom,fastrpc";
+					qcom,glink-channels = "fastrpcglink-apps-dsp";
+					label = "adsp";
+					qcom,non-secure-domain;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					compute-cb@3 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <3>;
+						iommus = <&apps_smmu 0x1803 0x0>;
+					};
+
+					compute-cb@4 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <4>;
+						iommus = <&apps_smmu 0x1804 0x0>;
+					};
+
+					compute-cb@5 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <5>;
+						iommus = <&apps_smmu 0x1805 0x0>;
+					};
+				};
+			};
+		};
+
 		wsa2macro: codec@31e0000 {
 			compatible = "qcom,sm8450-lpass-wsa-macro";
 			reg = <0 0x031e0000 0 0x1000>;
@ -2368,114 +2475,9 @@
 			status = "disabled";
 		};

-		remoteproc_adsp: remoteproc@30000000 {
-			compatible = "qcom,sm8450-adsp-pas";
-			reg = <0 0x30000000 0 0x100>;
-
-			interrupts-extended = <&pdc 6 IRQ_TYPE_EDGE_RISING>,
-					      <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>,
-					      <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>,
-					      <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>,
-					      <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>;
-			interrupt-names = "wdog", "fatal", "ready",
-					  "handover", "stop-ack";
-
-			clocks = <&rpmhcc RPMH_CXO_CLK>;
-			clock-names = "xo";
-
-			power-domains = <&rpmhpd RPMHPD_LCX>,
-					<&rpmhpd RPMHPD_LMX>;
-			power-domain-names = "lcx", "lmx";
-
-			memory-region = <&adsp_mem>;
-
-			qcom,qmp = <&aoss_qmp>;
-
-			qcom,smem-states = <&smp2p_adsp_out 0>;
-			qcom,smem-state-names = "stop";
-
-			status = "disabled";
-
-			remoteproc_adsp_glink: glink-edge {
-				interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
-							     IPCC_MPROC_SIGNAL_GLINK_QMP
-							     IRQ_TYPE_EDGE_RISING>;
-				mboxes = <&ipcc IPCC_CLIENT_LPASS
-						IPCC_MPROC_SIGNAL_GLINK_QMP>;
-
-				label = "lpass";
-				qcom,remote-pid = <2>;
-
-				gpr {
-					compatible = "qcom,gpr";
-					qcom,glink-channels = "adsp_apps";
-					qcom,domain = <GPR_DOMAIN_ID_ADSP>;
-					qcom,intents = <512 20>;
-					#address-cells = <1>;
-					#size-cells = <0>;
-
-					q6apm: service@1 {
-						compatible = "qcom,q6apm";
-						reg = <GPR_APM_MODULE_IID>;
-						#sound-dai-cells = <0>;
-						qcom,protection-domain = "avs/audio",
-									 "msm/adsp/audio_pd";
-
-						q6apmdai: dais {
-							compatible = "qcom,q6apm-dais";
-							iommus = <&apps_smmu 0x1801 0x0>;
-						};
-
-						q6apmbedai: bedais {
-							compatible = "qcom,q6apm-lpass-dais";
-							#sound-dai-cells = <1>;
-						};
-					};
-
-					q6prm: service@2 {
-						compatible = "qcom,q6prm";
-						reg = <GPR_PRM_MODULE_IID>;
-						qcom,protection-domain = "avs/audio",
-									 "msm/adsp/audio_pd";
-
-						q6prmcc: clock-controller {
-							compatible = "qcom,q6prm-lpass-clocks";
-							#clock-cells = <2>;
-						};
-					};
-				};
-
-				fastrpc {
-					compatible = "qcom,fastrpc";
-					qcom,glink-channels = "fastrpcglink-apps-dsp";
-					label = "adsp";
-					#address-cells = <1>;
-					#size-cells = <0>;
-
-					compute-cb@3 {
-						compatible = "qcom,fastrpc-compute-cb";
-						reg = <3>;
-						iommus = <&apps_smmu 0x1803 0x0>;
-					};
-
-					compute-cb@4 {
-						compatible = "qcom,fastrpc-compute-cb";
-						reg = <4>;
-						iommus = <&apps_smmu 0x1804 0x0>;
-					};
-
-					compute-cb@5 {
-						compatible = "qcom,fastrpc-compute-cb";
-						reg = <5>;
-						iommus = <&apps_smmu 0x1805 0x0>;
-					};
-				};
-			};
-		};
-
 		remoteproc_cdsp: remoteproc@32300000 {
 			compatible = "qcom,sm8450-cdsp-pas";
-			reg = <0 0x32300000 0 0x1400000>;
+			reg = <0 0x32300000 0 0x10000>;

 			interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_cdsp_in 0 IRQ_TYPE_EDGE_RISING>,
@ -2515,6 +2517,7 @@
 					compatible = "qcom,fastrpc";
 					qcom,glink-channels = "fastrpcglink-apps-dsp";
 					label = "cdsp";
+					qcom,non-secure-domain;
 					#address-cells = <1>;
 					#size-cells = <0>;

@ -2581,7 +2584,7 @@

 		remoteproc_mpss: remoteproc@4080000 {
 			compatible = "qcom,sm8450-mpss-pas";
-			reg = <0x0 0x04080000 0x0 0x4040>;
+			reg = <0x0 0x04080000 0x0 0x10000>;

 			interrupts-extended = <&intc GIC_SPI 264 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_modem_in 0 IRQ_TYPE_EDGE_RISING>,
--- a/arch/arm64/boot/dts/qcom/sm8550.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8550.dtsi
@ -1986,7 +1986,7 @@

 		remoteproc_mpss: remoteproc@4080000 {
 			compatible = "qcom,sm8550-mpss-pas";
-			reg = <0x0 0x04080000 0x0 0x4040>;
+			reg = <0x0 0x04080000 0x0 0x10000>;

 			interrupts-extended = <&intc GIC_SPI 264 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_modem_in 0 IRQ_TYPE_EDGE_RISING>,
@ -2026,6 +2026,137 @@
 			};
 		};

+		remoteproc_adsp: remoteproc@6800000 {
+			compatible = "qcom,sm8550-adsp-pas";
+			reg = <0x0 0x06800000 0x0 0x10000>;
+
+			interrupts-extended = <&pdc 6 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready",
+					  "handover", "stop-ack";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "xo";
+
+			power-domains = <&rpmhpd RPMHPD_LCX>,
+					<&rpmhpd RPMHPD_LMX>;
+			power-domain-names = "lcx", "lmx";
+
+			interconnects = <&lpass_lpicx_noc MASTER_LPASS_PROC 0 &mc_virt SLAVE_EBI1 0>;
+
+			memory-region = <&adspslpi_mem>, <&q6_adsp_dtb_mem>;
+
+			qcom,qmp = <&aoss_qmp>;
+
+			qcom,smem-states = <&smp2p_adsp_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			remoteproc_adsp_glink: glink-edge {
+				interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
+							     IPCC_MPROC_SIGNAL_GLINK_QMP
+							     IRQ_TYPE_EDGE_RISING>;
+				mboxes = <&ipcc IPCC_CLIENT_LPASS
+						IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+				label = "lpass";
+				qcom,remote-pid = <2>;
+
+				fastrpc {
+					compatible = "qcom,fastrpc";
+					qcom,glink-channels = "fastrpcglink-apps-dsp";
+					label = "adsp";
+					qcom,non-secure-domain;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					compute-cb@3 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <3>;
+						iommus = <&apps_smmu 0x1003 0x80>,
+							 <&apps_smmu 0x1063 0x0>;
+						dma-coherent;
+					};
+
+					compute-cb@4 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <4>;
+						iommus = <&apps_smmu 0x1004 0x80>,
+							 <&apps_smmu 0x1064 0x0>;
+						dma-coherent;
+					};
+
+					compute-cb@5 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <5>;
+						iommus = <&apps_smmu 0x1005 0x80>,
+							 <&apps_smmu 0x1065 0x0>;
+						dma-coherent;
+					};
+
+					compute-cb@6 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <6>;
+						iommus = <&apps_smmu 0x1006 0x80>,
+							 <&apps_smmu 0x1066 0x0>;
+						dma-coherent;
+					};
+
+					compute-cb@7 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <7>;
+						iommus = <&apps_smmu 0x1007 0x80>,
+							 <&apps_smmu 0x1067 0x0>;
+						dma-coherent;
+					};
+				};
+
+				gpr {
+					compatible = "qcom,gpr";
+					qcom,glink-channels = "adsp_apps";
+					qcom,domain = <GPR_DOMAIN_ID_ADSP>;
+					qcom,intents = <512 20>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					q6apm: service@1 {
+						compatible = "qcom,q6apm";
+						reg = <GPR_APM_MODULE_IID>;
+						#sound-dai-cells = <0>;
+						qcom,protection-domain = "avs/audio",
+									 "msm/adsp/audio_pd";
+
+						q6apmdai: dais {
+							compatible = "qcom,q6apm-dais";
+							iommus = <&apps_smmu 0x1001 0x80>,
+								 <&apps_smmu 0x1061 0x0>;
+						};
+
+						q6apmbedai: bedais {
+							compatible = "qcom,q6apm-lpass-dais";
+							#sound-dai-cells = <1>;
+						};
+					};
+
+					q6prm: service@2 {
+						compatible = "qcom,q6prm";
+						reg = <GPR_PRM_MODULE_IID>;
+						qcom,protection-domain = "avs/audio",
+									 "msm/adsp/audio_pd";
+
+						q6prmcc: clock-controller {
+							compatible = "qcom,q6prm-lpass-clocks";
+							#clock-cells = <2>;
+						};
+					};
+				};
+			};
+		};
+
 		lpass_wsa2macro: codec@6aa0000 {
 			compatible = "qcom,sm8550-lpass-wsa-macro";
 			reg = <0 0x06aa0000 0 0x1000>;
@ -2448,9 +2579,8 @@

 			power-domains = <&dispcc MDSS_GDSC>;

-			interconnects = <&mmss_noc MASTER_MDP 0 &gem_noc SLAVE_LLCC 0>,
-					<&mc_virt MASTER_LLCC 0 &mc_virt SLAVE_EBI1 0>;
-			interconnect-names = "mdp0-mem", "mdp1-mem";
+			interconnects = <&mmss_noc MASTER_MDP 0 &mc_virt SLAVE_EBI1 0>;
+			interconnect-names = "mdp0-mem";

 			iommus = <&apps_smmu 0x1c00 0x2>;

@ -3955,131 +4085,6 @@
 			interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>;
 		};

-		remoteproc_adsp: remoteproc@30000000 {
-			compatible = "qcom,sm8550-adsp-pas";
-			reg = <0x0 0x30000000 0x0 0x100>;
-
-			interrupts-extended = <&pdc 6 IRQ_TYPE_EDGE_RISING>,
-					      <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>,
-					      <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>,
-					      <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>,
-					      <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>;
-			interrupt-names = "wdog", "fatal", "ready",
-					  "handover", "stop-ack";
-
-			clocks = <&rpmhcc RPMH_CXO_CLK>;
-			clock-names = "xo";
-
-			power-domains = <&rpmhpd RPMHPD_LCX>,
-					<&rpmhpd RPMHPD_LMX>;
-			power-domain-names = "lcx", "lmx";
-
-			interconnects = <&lpass_lpicx_noc MASTER_LPASS_PROC 0 &mc_virt SLAVE_EBI1 0>;
-
-			memory-region = <&adspslpi_mem>, <&q6_adsp_dtb_mem>;
-
-			qcom,qmp = <&aoss_qmp>;
-
-			qcom,smem-states = <&smp2p_adsp_out 0>;
-			qcom,smem-state-names = "stop";
-
-			status = "disabled";
-
-			remoteproc_adsp_glink: glink-edge {
-				interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
-							     IPCC_MPROC_SIGNAL_GLINK_QMP
-							     IRQ_TYPE_EDGE_RISING>;
-				mboxes = <&ipcc IPCC_CLIENT_LPASS
-						IPCC_MPROC_SIGNAL_GLINK_QMP>;
-
-				label = "lpass";
-				qcom,remote-pid = <2>;
-
-				fastrpc {
-					compatible = "qcom,fastrpc";
-					qcom,glink-channels = "fastrpcglink-apps-dsp";
-					label = "adsp";
-					#address-cells = <1>;
-					#size-cells = <0>;
-
-					compute-cb@3 {
-						compatible = "qcom,fastrpc-compute-cb";
-						reg = <3>;
-						iommus = <&apps_smmu 0x1003 0x80>,
-							 <&apps_smmu 0x1063 0x0>;
-					};
-
-					compute-cb@4 {
-						compatible = "qcom,fastrpc-compute-cb";
-						reg = <4>;
-						iommus = <&apps_smmu 0x1004 0x80>,
-							 <&apps_smmu 0x1064 0x0>;
-					};
-
-					compute-cb@5 {
-						compatible = "qcom,fastrpc-compute-cb";
-						reg = <5>;
-						iommus = <&apps_smmu 0x1005 0x80>,
-							 <&apps_smmu 0x1065 0x0>;
-					};
-
-					compute-cb@6 {
-						compatible = "qcom,fastrpc-compute-cb";
-						reg = <6>;
-						iommus = <&apps_smmu 0x1006 0x80>,
-							 <&apps_smmu 0x1066 0x0>;
-					};
-
-					compute-cb@7 {
-						compatible = "qcom,fastrpc-compute-cb";
-						reg = <7>;
-						iommus = <&apps_smmu 0x1007 0x80>,
-							 <&apps_smmu 0x1067 0x0>;
-					};
-				};
-
-				gpr {
-					compatible = "qcom,gpr";
-					qcom,glink-channels = "adsp_apps";
-					qcom,domain = <GPR_DOMAIN_ID_ADSP>;
-					qcom,intents = <512 20>;
-					#address-cells = <1>;
-					#size-cells = <0>;
-
-					q6apm: service@1 {
-						compatible = "qcom,q6apm";
-						reg = <GPR_APM_MODULE_IID>;
-						#sound-dai-cells = <0>;
-						qcom,protection-domain = "avs/audio",
-									 "msm/adsp/audio_pd";
-
-						q6apmdai: dais {
-							compatible = "qcom,q6apm-dais";
-							iommus = <&apps_smmu 0x1001 0x80>,
-								 <&apps_smmu 0x1061 0x0>;
-						};
-
-						q6apmbedai: bedais {
-							compatible = "qcom,q6apm-lpass-dais";
-							#sound-dai-cells = <1>;
-						};
-					};
-
-					q6prm: service@2 {
-						compatible = "qcom,q6prm";
-						reg = <GPR_PRM_MODULE_IID>;
-						qcom,protection-domain = "avs/audio",
-									 "msm/adsp/audio_pd";
-
-						q6prmcc: clock-controller {
-							compatible = "qcom,q6prm-lpass-clocks";
-							#clock-cells = <2>;
-						};
-					};
-				};
-			};
-		};
-
 		nsp_noc: interconnect@320c0000 {
 			compatible = "qcom,sm8550-nsp-noc";
 			reg = <0 0x320c0000 0 0xe080>;
@ -4089,7 +4094,7 @@

 		remoteproc_cdsp: remoteproc@32300000 {
 			compatible = "qcom,sm8550-cdsp-pas";
-			reg = <0x0 0x32300000 0x0 0x1400000>;
+			reg = <0x0 0x32300000 0x0 0x10000>;

 			interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_cdsp_in 0 IRQ_TYPE_EDGE_RISING>,
@ -4132,6 +4137,7 @@
 					compatible = "qcom,fastrpc";
 					qcom,glink-channels = "fastrpcglink-apps-dsp";
 					label = "cdsp";
+					qcom,non-secure-domain;
 					#address-cells = <1>;
 					#size-cells = <0>;

@ -4141,6 +4147,7 @@
 						iommus = <&apps_smmu 0x1961 0x0>,
 							 <&apps_smmu 0x0c01 0x20>,
 							 <&apps_smmu 0x19c1 0x10>;
+						dma-coherent;
 					};

 					compute-cb@2 {
@ -4149,6 +4156,7 @@
 						iommus = <&apps_smmu 0x1962 0x0>,
 							 <&apps_smmu 0x0c02 0x20>,
 							 <&apps_smmu 0x19c2 0x10>;
+						dma-coherent;
 					};

 					compute-cb@3 {
@ -4157,6 +4165,7 @@
 						iommus = <&apps_smmu 0x1963 0x0>,
 							 <&apps_smmu 0x0c03 0x20>,
 							 <&apps_smmu 0x19c3 0x10>;
+						dma-coherent;
 					};

 					compute-cb@4 {
@ -4165,6 +4174,7 @@
 						iommus = <&apps_smmu 0x1964 0x0>,
 							 <&apps_smmu 0x0c04 0x20>,
 							 <&apps_smmu 0x19c4 0x10>;
+						dma-coherent;
 					};

 					compute-cb@5 {
@ -4173,6 +4183,7 @@
 						iommus = <&apps_smmu 0x1965 0x0>,
 							 <&apps_smmu 0x0c05 0x20>,
 							 <&apps_smmu 0x19c5 0x10>;
+						dma-coherent;
 					};

 					compute-cb@6 {
@ -4181,6 +4192,7 @@
 						iommus = <&apps_smmu 0x1966 0x0>,
 							 <&apps_smmu 0x0c06 0x20>,
 							 <&apps_smmu 0x19c6 0x10>;
+						dma-coherent;
 					};

 					compute-cb@7 {
@ -4189,6 +4201,7 @@
 						iommus = <&apps_smmu 0x1967 0x0>,
 							 <&apps_smmu 0x0c07 0x20>,
 							 <&apps_smmu 0x19c7 0x10>;
+						dma-coherent;
 					};

 					compute-cb@8 {
@ -4197,6 +4210,7 @@
 						iommus = <&apps_smmu 0x1968 0x0>,
 							 <&apps_smmu 0x0c08 0x20>,
 							 <&apps_smmu 0x19c8 0x10>;
+						dma-coherent;
 					};

 					/* note: secure cb9 in downstream */
--- a/arch/arm64/boot/dts/rockchip/px30-ringneck-haikou.dts
+++ b/arch/arm64/boot/dts/rockchip/px30-ringneck-haikou.dts
@ -221,11 +221,14 @@
 };

 &uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_xfer>;
 	status = "okay";
 };

 &uart5 {
 	pinctrl-0 = <&uart5_xfer>;
+	rts-gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 };

--- a/arch/arm64/boot/dts/rockchip/px30-ringneck.dtsi
+++ b/arch/arm64/boot/dts/rockchip/px30-ringneck.dtsi
@ -367,6 +367,11 @@
 	status = "okay";
 };

+&uart5 {
+	/delete-property/ dmas;
+	/delete-property/ dma-names;
+};
+
 /* Mule UCAN */
 &usb_host0_ehci {
 	status = "okay";
--- a/Show More
+++ b/Show More