Merge series from Takashi Iwai <tiwai@suse.de>:
This is a revised series of small and trivial patches to convert to
the newer PM macros, e.g. from SET_RUNTIME_PM_OPS() to
RUNTIME_PM_OPS().
The conversions are systematic, and we could reduce messy
__maybe_unused and ifdefs with those changes.
Merely code refactoring, and shouldn't change the actual driver
behavior.
Merge series from Charles Keepax <ckeepax@opensource.cirrus.com>:
Make some small fixups and add some minor missing features that will be
needed for the next major part of the SDCA work. This series doesn't do
a lot on its own, but as the next series will add all the ALSA control
and DAPM graph creation it's probably best to get these minor things out
of the way to simplify review on the bigger stuff.
Merge series from Linus Walleij <linus.walleij@linaro.org>:
Three remaining TI PCM codecs use the old GPIO API in
different ways, fix them all up and move over to
<linux/gpio/consumer.h> and get rid of <linux/gpio.h>.
Merge series from "Nícolas F. R. A. Prado" <nfraprado@collabora.com>:
This series enables the MT8188-MT6359 sound driver to retrieve the
MT6359 ACCDET sound component from a mediatek,accdet DT property, which
allows detecting jack insertion/removal.
Patch 1 describes the new property in the binding. Patch 2 implements
the sound component retrieval in the common MTK soundcard driver. Patch
4 updates the MT8188-MT6359 sound driver to register the audio jack and
initialize the ACCDET driver for detection, if the property is present.
Patch 3 adds a stub to prevent a linker failure in case the
MT6359-ACCDET config is disabled.
Tested on the Genio 700 EVK board.
The ASoC soc-utils driver does not require the creation of a platform
device. Originally, this approach was chosen for simplicity when the
driver was first implemented.
With the introduction of the lightweight faux device interface, we now
have a more appropriate alternative. Migrate the driver to utilize the
faux bus, given that the platform device it previously created was not
a real one anyway. This will simplify the code, reducing its footprint
while maintaining functionality.
Cc: Mark Brown <broonie@kernel.org>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: linux-sound@vger.kernel.org
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Link: https://patch.msgid.link/20250317-plat2faux_dev-v1-6-5fe67c085ad5@arm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the newer EXPORT_GPL_DEV_PM_OPS() macro together with pm_ptr(),
which allows us to drop superfluous CONFIG_PM ifdefs.
This optimizes slightly when CONFIG_PM is disabled, too.
Cc: Shenghao Ding <shenghao-ding@ti.com>
Cc: Kevin Lu <kevin-lu@ti.com>
Cc: Baojun Xu <baojun.xu@ti.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20250317095603.20073-89-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the newer RUNTIME_PM_OPS() and SYSTEM_SLEEP_PM_OPS() macros
instead of SET_RUNTIME_PM_OPS() and SET_SYSTEM_SLEEP_PM_OPS() together
with pm_ptr(), which allows us dropping ugly __maybe_unused
attributes.
This optimizes slightly when CONFIG_PM is disabled, too.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20250317095603.20073-88-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the newer RUNTIME_PM_OPS() macro instead of SET_RUNTIME_PM_OPS()
together with pm_ptr().
This optimizes slightly when CONFIG_PM is disabled, too.
Reviewed-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20250317095603.20073-87-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the newer RUNTIME_PM_OPS() and SYSTEM_SLEEP_PM_OPS() macros
instead of SET_RUNTIME_PM_OPS() and SET_SYSTEM_SLEEP_PM_OPS() together
with pm_ptr(), which allows us dropping ugly __maybe_unused
attributes.
This optimizes slightly when CONFIG_PM is disabled, too.
Cc: linux-tegra@vger.kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20250317095603.20073-86-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the newer RUNTIME_PM_OPS() and SYSTEM_SLEEP_PM_OPS() macros
instead of SET_RUNTIME_PM_OPS() and SET_SYSTEM_SLEEP_PM_OPS() together
with pm_ptr(), which allows us dropping ugly __maybe_unused
attributes.
This optimizes slightly when CONFIG_PM is disabled, too.
Cc: linux-tegra@vger.kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20250317095603.20073-85-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the newer RUNTIME_PM_OPS() and SYSTEM_SLEEP_PM_OPS() macros
instead of SET_RUNTIME_PM_OPS() and SET_SYSTEM_SLEEP_PM_OPS() together
with pm_ptr(), which allows us dropping ugly __maybe_unused
attributes.
This optimizes slightly when CONFIG_PM is disabled, too.
Cc: linux-tegra@vger.kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20250317095603.20073-84-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the newer RUNTIME_PM_OPS() and SYSTEM_SLEEP_PM_OPS() macros
instead of SET_RUNTIME_PM_OPS() and SET_SYSTEM_SLEEP_PM_OPS() together
with pm_ptr(), which allows us dropping ugly __maybe_unused
attributes.
This optimizes slightly when CONFIG_PM is disabled, too.
Cc: linux-tegra@vger.kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20250317095603.20073-83-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the newer RUNTIME_PM_OPS() instead of SET_RUNTIME_PM_OPS()
together with pm_ptr().
This optimizes slightly when CONFIG_PM is disabled, too.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20250317095603.20073-82-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the newer SYSTEM_SLEEP_PM_OPS() macro instead
SET_SYSTEM_SLEEP_PM_OPS() together with pm_ptr(), which allows us
dropping superfluous CONFIG_PM_SLEEP ifdefs.
This optimizes slightly when CONFIG_PM is disabled, too.
Cc: Olivier Moysan <olivier.moysan@foss.st.com>
Cc: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20250317095603.20073-81-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the newer RUNTIME_PM_OPS() and SYSTEM_SLEEP_PM_OPS() macros
instead of SET_RUNTIME_PM_OPS() and SET_SYSTEM_SLEEP_PM_OPS() together
with pm_ptr(), which allows us to drop superfluous CONFIG_PM ifdefs.
This optimizes slightly when CONFIG_PM is disabled, too.
Cc: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20250317095603.20073-77-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the newer RUNTIME_PM_OPS() and SYSTEM_SLEEP_PM_OPS() macros
instead of SET_RUNTIME_PM_OPS() and SET_SYSTEM_SLEEP_PM_OPS() together
with pm_ptr(), which allows us to drop ugly __maybe_unused
attributes.
This optimizes slightly when CONFIG_PM is disabled, too.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20250317095603.20073-76-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the newer SYSTEM_SLEEP_PM_OPS() macro instead of
SET_SYSTEM_SLEEP_PM_OPS() together with pm_ptr(), which allows us to
drop ugly __maybe_unused attributes.
This optimizes slightly when CONFIG_PM is disabled, too.
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20250317095603.20073-75-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the newer SYSTEM_SLEEP_PM_OPS() macro instead of
SET_SYSTEM_SLEEP_PM_OPS() together with pm_ptr(), which allows us to
drop ugly __maybe_unused attributes.
This optimizes slightly when CONFIG_PM is disabled, too.
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20250317095603.20073-74-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the newer RUNTIME_PM_OPS() and SYSTEM_SLEEP_PM_OPS() macros
instead of SET_RUNTIME_PM_OPS() and SET_SYSTEM_SLEEP_PM_OPS() together
with pm_ptr(), which allows us to drop ugly __maybe_unused
attributes.
This optimizes slightly when CONFIG_PM is disabled, too.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20250317095603.20073-73-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the newer RUNTIME_PM_OPS() macro instead of SET_RUNTIME_PM_OPS()
together with pm_ptr().
This optimizes slightly when CONFIG_PM is disabled, too.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20250317095603.20073-72-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the newer RUNTIME_PM_OPS() macro instead of SET_RUNTIME_PM_OPS()
together with pm_ptr().
This optimizes slightly when CONFIG_PM is disabled, too.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20250317095603.20073-71-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the newer RUNTIME_PM_OPS() macro instead of SET_RUNTIME_PM_OPS()
together with pm_ptr().
This optimizes slightly when CONFIG_PM is disabled, too.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20250317095603.20073-70-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the newer RUNTIME_PM_OPS() macro instead of SET_RUNTIME_PM_OPS()
together with pm_ptr().
This optimizes slightly when CONFIG_PM is disabled, too.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20250317095603.20073-69-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the newer RUNTIME_PM_OPS() macro instead of SET_RUNTIME_PM_OPS()
together with pm_ptr().
This optimizes slightly when CONFIG_PM is disabled, too.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20250317095603.20073-68-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the newer RUNTIME_PM_OPS() macro instead of SET_RUNTIME_PM_OPS()
together with pm_ptr().
This optimizes slightly when CONFIG_PM is disabled, too.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20250317095603.20073-67-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the newer RUNTIME_PM_OPS() macro instead of SET_RUNTIME_PM_OPS()
together with pm_ptr().
This optimizes slightly when CONFIG_PM is disabled, too.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20250317095603.20073-66-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the newer RUNTIME_PM_OPS() macro instead of SET_RUNTIME_PM_OPS()
together with pm_ptr().
This optimizes slightly when CONFIG_PM is disabled, too.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20250317095603.20073-65-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the newer RUNTIME_PM_OPS() macro instead of SET_RUNTIME_PM_OPS()
together with pm_ptr().
This optimizes slightly when CONFIG_PM is disabled, too.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20250317095603.20073-64-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the newer RUNTIME_PM_OPS() and SYSTEM_SLEEP_PM_OPS() macros
instead of SET_RUNTIME_PM_OPS() and SET_SYSTEM_SLEEP_PM_OPS() together
with pm_ptr(), which allows us dropping ugly __maybe_unused
attributes.
This optimizes slightly when CONFIG_PM is disabled, too.
Cc: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20250317095603.20073-63-tiwai@suse.de
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the newer RUNTIME_PM_OPS() macro instead of SET_RUNTIME_PM_OPS()
together with pm_ptr(), which allows us dropping ugly __maybe_unused
attributes.
This optimizes slightly when CONFIG_PM is disabled, too.
Cc: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20250317095603.20073-62-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the newer RUNTIME_PM_OPS() and SYSTEM_SLEEP_PM_OPS() macros
instead of SET_RUNTIME_PM_OPS() and SET_SYSTEM_SLEEP_PM_OPS() together
with pm_ptr(), which allows us dropping superfluous CONFIG_PM_SLEEP
ifdefs.
This optimizes slightly when CONFIG_PM is disabled, too.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20250317095603.20073-61-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the newer RUNTIME_PM_OPS() and SYSTEM_SLEEP_PM_OPS() macros
instead of SET_RUNTIME_PM_OPS() and SET_SYSTEM_SLEEP_PM_OPS() together
with pm_ptr()
This optimizes slightly when CONFIG_PM is disabled, too.
Cc: Shengjiu Wang <shengjiu.wang@gmail.com>
Cc: Xiubo Li <Xiubo.Lee@gmail.com>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Nicolin Chen <nicoleotsuka@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20250317095603.20073-60-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the newer RUNTIME_PM_OPS() macro instead of SET_RUNTIME_PM_OPS()
together with pm_ptr(), which allows us dropping superfluous CONFIG_PM
ifdefs.
This optimizes slightly when CONFIG_PM is disabled, too.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20250317095603.20073-59-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the newer RUNTIME_PM_OPS() macro instead of SET_RUNTIME_PM_OPS()
together with pm_ptr(), which allows us dropping ugly __maybe_unused
attributes.
This optimizes slightly when CONFIG_PM is disabled, too.
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20250317095603.20073-58-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the newer RUNTIME_PM_OPS() macro instead of SET_RUNTIME_PM_OPS()
together with pm_ptr(), which allows us dropping ugly __maybe_unused
attributes.
This optimizes slightly when CONFIG_PM is disabled, too.
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20250317095603.20073-57-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the newer RUNTIME_PM_OPS() macro instead of SET_RUNTIME_PM_OPS()
together with pm_ptr(), which allows us dropping ugly __maybe_unused
attributes.
This optimizes slightly when CONFIG_PM is disabled, too.
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20250317095603.20073-56-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the newer SYSTEM_SLEEP_PM_OPS() macro instead of
SET_SYSTEM_SLEEP_PM_OPS() together with pm_ptr(), which allows us
superfluous CONFIG_PM_SLEEP ifdefs.
This optimizes slightly when CONFIG_PM is disabled, too.
Cc: patches@opensource.cirrus.com
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250317095603.20073-55-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the newer RUNTIME_PM_OPS() and SYSTEM_SLEEP_PM_OPS() macros
instead of SET_RUNTIME_PM_OPS() and SET_SYSTEM_SLEEP_PM_OPS() together
with pm_ptr(), which allows us dropping superfluous CONFIG_PM ifdefs.
This optimizes slightly when CONFIG_PM is disabled, too.
Cc: patches@opensource.cirrus.com
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250317095603.20073-54-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the newer EXPORT_GPL_DEV_PM_OPS() macro together with pm_ptr(),
which allows us to drop superfluous CONFIG_PM ifdefs.
This optimizes slightly when CONFIG_PM is disabled, too.
Cc: patches@opensource.cirrus.com
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250317095603.20073-53-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
