Updates to the usual drivers (scsi_debug, ufs, lpfc, st, fnic, mpi3mr,
mpt3sas) and the removal of cxlflash. The only non-trivial core change
is an addition to unit attention handling to recognize UAs for power
on/reset and new media so the tape driver can use it.
Signed-off-by: James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCZ+RQ2yYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishe6DAQCdW/21
S1Y6BDlJLQfpWChGv6GIzanC+5sMfylw4d6ULgEA8upOE5L3fC29IY958jXig0o1
uLjxylwYEfVLDf8gwJ0=
=mkM+
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley:
"Updates to the usual drivers (scsi_debug, ufs, lpfc, st, fnic, mpi3mr,
mpt3sas) and the removal of cxlflash.
The only non-trivial core change is an addition to unit attention
handling to recognize UAs for power on/reset and new media so the tape
driver can use it"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (107 commits)
scsi: st: Tighten the page format heuristics with MODE SELECT
scsi: st: ERASE does not change tape location
scsi: st: Fix array overflow in st_setup()
scsi: target: tcm_loop: Fix wrong abort tag
scsi: lpfc: Restore clearing of NLP_UNREG_INP in ndlp->nlp_flag
scsi: hisi_sas: Fixed failure to issue vendor specific commands
scsi: fnic: Remove unnecessary NUL-terminations
scsi: fnic: Remove redundant flush_workqueue() calls
scsi: core: Use a switch statement when attaching VPD pages
scsi: ufs: renesas: Add initialization code for R-Car S4-8 ES1.2
scsi: ufs: renesas: Add reusable functions
scsi: ufs: renesas: Refactor 0x10ad/0x10af PHY settings
scsi: ufs: renesas: Remove register control helper function
scsi: ufs: renesas: Add register read to remove save/set/restore
scsi: ufs: renesas: Replace init data by init code
scsi: ufs: dt-bindings: renesas,ufs: Add calibration data
scsi: mpi3mr: Task Abort EH Support
scsi: storvsc: Don't report the host packet status as the hv status
scsi: isci: Make most module parameters static
scsi: megaraid_sas: Make most module parameters static
...
In preparation for memtostr*() checking that its source is marked as
nonstring, annotate the device strings accordingly.
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> # SCSI
Signed-off-by: Kees Cook <kees@kernel.org>
The names RESERVE and RELEASE are not only used in <scsi/scsi_proto.h> but
also elsewhere in the kernel:
$ git grep -nHE 'define[[:blank:]]*(RESERVE|RELEASE)[[:blank:]]'
drivers/input/joystick/walkera0701.c:13:#define RESERVE 20000
drivers/s390/char/tape_std.h:56:#define RELEASE 0xD4 /* 3420 NOP, 3480 REJECT */
drivers/s390/char/tape_std.h:58:#define RESERVE 0xF4 /* 3420 NOP, 3480 REJECT */
Additionally, while the names of the symbolic constants RESERVE_10 and
RELEASE_10 include the command length, the command length is not included
in the RESERVE and RELEASE names. Address both issues by renaming the
RESERVE and RELEASE constants into RESERVE_6 and RELEASE_6 respectively.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20250210205031.2970833-1-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
mptscsih_target_reset() was added in 2023 by commit e6629081fb12 ("scsi:
message: fusion: Correct definitions for mptscsih_dev_reset()") but never
used.
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Link: https://lore.kernel.org/r/20250127002716.113641-1-linux@treblig.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The only difference between the .sdev_configure() and .slave_configure()
methods is that the former accepts an additional 'limits' argument.
Convert all SCSI drivers that define a .slave_configure() method to
.sdev_configure(). This patch prepares for removing the
.slave_configure() method. No functionality has been changed.
Acked-by: Geoff Levand <geoff@infradead.org> # for ps3rom
Acked-by: Khalid Aziz <khalid@gonehiking.org> # for the BusLogic driver
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20241022180839.2712439-4-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Rename .slave_alloc() into .sdev_init() and .slave_destroy() into
.sdev_destroy(). The new names make it clear that these are actions on
SCSI devices. Make this change in the SCSI core, SCSI drivers and also
in the ATA drivers. No functionality has been changed.
This patch has been created as follows:
* Change the text "slave_alloc" into "sdev_init" in all source files
except those in drivers/net/ and Documentation/.
* Change the text "slave_destroy" into "sdev_destroy" in all source
files except those in drivers/net/ and Documentation/.
* Rename lpfc_no_slave() into lpfc_no_sdev().
* Manually adjust whitespace where necessary to restore vertical
alignment (dc395x driver and include/linux/libata.h).
Acked-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20241022180839.2712439-2-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
'struct pci_device_id' is not modified in these drivers.
Constifying this structure moves some data to a read-only section, so
increase overall security.
On a x86_64, with allmodconfig, as an example:
Before:
======
text data bss dec hex filename
36999 2451 88 39538 9a72 drivers/message/fusion/mptfc.o
After:
=====
text data bss dec hex filename
37415 2043 88 39546 9a7a drivers/message/fusion/mptfc.o
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/fe8f17a999b6def2649b2ef52ea5c9ee61e28bd0.1731705152.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Except for preventing build errors, there shouldn't be any conditionals in
kernel drivers on __GENKSYMS__. Hence remove an #ifndef __GENKSYMS__ / #endif
pair from the MPT Fusion driver.
Cc: Sathya Prakash <sathya.prakash@broadcom.com>
Cc: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Cc: Suganath Prabu Subramani <suganath-prabu.subramani@broadcom.com>
Cc: MPT-FusionLinux.pdl@broadcom.com
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240930201347.1837690-1-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
These are mostly minor updates. There are two drivers (lpfc and
mpi3mr) which missed the initial pull and a core change to retry a
start/stop unit which affect suspend/resume.
Signed-off-by: James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCZvh4QiYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishQajAQDx561I
cgbPZjZkSOYp+qJowaphyySZ1SS8pfMlVAIiXQEAs4SqhIN8e9QWpgI0bA7X7xtB
UiOUsIHPHM+BFU6kbJQ=
=qjsp
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull more SCSI updates from James Bottomley:
"These are mostly minor updates.
There are two drivers (lpfc and mpi3mr) which missed the initial
pull and a core change to retry a start/stop unit which affect
suspend/resume"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (32 commits)
scsi: lpfc: Update lpfc version to 14.4.0.5
scsi: lpfc: Support loopback tests with VMID enabled
scsi: lpfc: Revise TRACE_EVENT log flag severities from KERN_ERR to KERN_WARNING
scsi: lpfc: Ensure DA_ID handling completion before deleting an NPIV instance
scsi: lpfc: Fix kref imbalance on fabric ndlps from dev_loss_tmo handler
scsi: lpfc: Restrict support for 32 byte CDBs to specific HBAs
scsi: lpfc: Update phba link state conditional before sending CMF_SYNC_WQE
scsi: lpfc: Add ELS_RSP cmd to the list of WQEs to flush in lpfc_els_flush_cmd()
scsi: mpi3mr: Update driver version to 8.12.0.0.50
scsi: mpi3mr: Improve wait logic while controller transitions to READY state
scsi: mpi3mr: Update MPI Headers to revision 34
scsi: mpi3mr: Use firmware-provided timestamp update interval
scsi: mpi3mr: Enhance the Enable Controller retry logic
scsi: sd: Fix off-by-one error in sd_read_block_characteristics()
scsi: pm8001: Do not overwrite PCI queue mapping
scsi: scsi_debug: Remove a useless memset()
scsi: pmcraid: Convert comma to semicolon
scsi: sd: Retry START STOP UNIT commands
scsi: mpi3mr: A performance fix
scsi: ufs: qcom: Update MODE_MAX cfg_bw value
...
no_llseek had been defined to NULL two years ago, in commit 868941b14441
("fs: remove no_llseek")
To quote that commit,
At -rc1 we'll need do a mechanical removal of no_llseek -
git grep -l -w no_llseek | grep -v porting.rst | while read i; do
sed -i '/\<no_llseek\>/d' $i
done
would do it.
Unfortunately, that hadn't been done. Linus, could you do that now, so
that we could finally put that thing to rest? All instances are of the
form
.llseek = no_llseek,
so it's obviously safe.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Using the real macro is usually more intuitive and readable when the
original file is guaranteed to contain the minmax.h header file and compile
correctly.
Signed-off-by: Yan Zhen <yanzhen@vivo.com>
Link: https://lore.kernel.org/r/20240902013303.909316-1-yanzhen@vivo.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Bart Van Assche <bvanassche@acm.org> says:
Hi Martin,
Multiple SCSI drivers use snprintf() to format a workqueue name before
invoking one of the create*_workqueue() macros. This patch series
simplifies such code by passing the format string and arguments to
alloc_workqueue(). Additionally, the structure members that are only
used as a temporary buffer for formatting workqueue names are
removed. Please consider this patch series for the next merge window.
Thanks,
Bart.
Link: https://lore.kernel.org/r/20240822195944.654691-1-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Let alloc*_workqueue() format the workqueue names instead of calling
snprintf() explicitly.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240822195944.654691-3-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Replace the deprecated[1] use of a 1-element array in struct
_CONFIG_PAGE_IOC_4 with a modern flexible array.
Additionally add __counted_by annotation since SEP is only ever accessed
after updating ACtiveSEP:
lsi/mpi_cnfg.h: IOC_4_SEP SEP[] __counted_by(ActiveSEP); /* 08h */
mptsas.c: ii = IOCPage4Ptr->ActiveSEP++;
mptsas.c: IOCPage4Ptr->SEP[ii].SEPTargetID = id;
mptsas.c: IOCPage4Ptr->SEP[ii].SEPBus = channel;
No binary differences are present after this conversion.
Link: https://github.com/KSPP/linux/issues/79 [1]
Signed-off-by: Kees Cook <kees@kernel.org>
Link: https://lore.kernel.org/r/20240711172821.123936-6-kees@kernel.org
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Replace the deprecated[1] use of a 1-element array in struct
_CONFIG_PAGE_IOC_3 with a modern flexible array.
Additionally add __counted_by annotation since PhysDisk is only ever
accessed via a loops bounded by NumPhysDisks:
lsi/mpi_cnfg.h: IOC_3_PHYS_DISK PhysDisk[] __counted_by(NumPhysDisks); /* 08h */
mptscsih.c: for (i = 0; i < ioc->raid_data.pIocPg3->NumPhysDisks; i++) {
mptscsih.c: if ((id == ioc->raid_data.pIocPg3->PhysDisk[i].PhysDiskID) &&
mptscsih.c: (channel == ioc->raid_data.pIocPg3->PhysDisk[i].PhysDiskBus)) {
mptscsih.c: for (i = 0; i < ioc->raid_data.pIocPg3->NumPhysDisks; i++) {
mptscsih.c: ioc->raid_data.pIocPg3->PhysDisk[i].PhysDiskNum);
mptscsih.c: ioc->raid_data.pIocPg3->PhysDisk[i].PhysDiskNum,
mptscsih.c: for (i = 0; i < ioc->raid_data.pIocPg3->NumPhysDisks; i++) {
mptscsih.c: if ((id == ioc->raid_data.pIocPg3->PhysDisk[i].PhysDiskID) &&
mptscsih.c: (channel == ioc->raid_data.pIocPg3->PhysDisk[i].PhysDiskBus)) {
mptscsih.c: rc = ioc->raid_data.pIocPg3->PhysDisk[i].PhysDiskNum;
mptscsih.c: for (i = 0; i < ioc->raid_data.pIocPg3->NumPhysDisks; i++) {
mptscsih.c: ioc->raid_data.pIocPg3->PhysDisk[i].PhysDiskNum);
mptscsih.c: ioc->raid_data.pIocPg3->PhysDisk[i].PhysDiskNum,
No binary differences are present after this conversion.
Link: https://github.com/KSPP/linux/issues/79 [1]
Signed-off-by: Kees Cook <kees@kernel.org>
Link: https://lore.kernel.org/r/20240711172821.123936-5-kees@kernel.org
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Replace the deprecated[1] use of a 1-element array in struct
_CONFIG_PAGE_IOC_2 with a modern flexible array.
Additionally add __counted_by annotation since RaidVolume is only ever
accessed from loops controlled by NumActiveVolumes:
lsi/mpi_cnfg.h: CONFIG_PAGE_IOC_2_RAID_VOL RaidVolume[] __counted_by(NumActiveVolumes); /* 0Ch */
mptbase.c: for (i = 0; i < pIoc2->NumActiveVolumes ; i++)
mptbase.c: pIoc2->RaidVolume[i].VolumeBus,
mptbase.c: pIoc2->RaidVolume[i].VolumeID);
mptsas.c: for (i = 0; i < ioc->raid_data.pIocPg2->NumActiveVolumes; i++) {
mptsas.c: RaidVolume[i].VolumeID) {
mptsas.c: RaidVolume[i].VolumeBus;
mptsas.c: for (i = 0; i < ioc->raid_data.pIocPg2->NumActiveVolumes; i++) {
mptsas.c: ioc->raid_data.pIocPg2->RaidVolume[i].VolumeID, 0);
mptsas.c: ioc->raid_data.pIocPg2->RaidVolume[i].VolumeID);
mptsas.c: ioc->raid_data.pIocPg2->RaidVolume[i].VolumeID, 0);
mptsas.c: for (i = 0; i < ioc->raid_data.pIocPg2->NumActiveVolumes; i++) {
mptsas.c: if (ioc->raid_data.pIocPg2->RaidVolume[i].VolumeID ==
mptsas.c: for (i = 0; i < ioc->raid_data.pIocPg2->NumActiveVolumes; i++)
mptsas.c: if (ioc->raid_data.pIocPg2->RaidVolume[i].VolumeID == id)
mptspi.c: for (i=0; i < ioc->raid_data.pIocPg2->NumActiveVolumes; i++) {
mptspi.c: if (ioc->raid_data.pIocPg2->RaidVolume[i].VolumeID == id) {
No binary differences are present after this conversion.
Link: https://github.com/KSPP/linux/issues/79 [1]
Signed-off-by: Kees Cook <kees@kernel.org>
Link: https://lore.kernel.org/r/20240711172821.123936-4-kees@kernel.org
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Replace the deprecated[1] use of a 1-element array in struct
_CONFIG_PAGE_RAID_PHYS_DISK_1 with a modern flexible array.
Additionally add __counted_by annotation since Path is only ever accessed
via a loops bounded by NumPhysDiskPaths:
lsi/mpi_cnfg.h: RAID_PHYS_DISK1_PATH Path[] __counted_by(NumPhysDiskPaths);/* 0Ch */
mptbase.c: phys_disk->NumPhysDiskPaths = buffer->NumPhysDiskPaths;
mptbase.c: for (i = 0; i < phys_disk->NumPhysDiskPaths; i++) {
mptbase.c: phys_disk->Path[i].PhysDiskID = buffer->Path[i].PhysDiskID;
mptbase.c: phys_disk->Path[i].PhysDiskBus = buffer->Path[i].PhysDiskBus;
No binary differences are present after this conversion.
Link: https://github.com/KSPP/linux/issues/79 [1]
Signed-off-by: Kees Cook <kees@kernel.org>
Link: https://lore.kernel.org/r/20240711172821.123936-3-kees@kernel.org
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Replace the deprecated[1] use of a 1-element array in struct
_CONFIG_PAGE_SAS_IO_UNIT_0 with a modern flexible array.
Additionally add __counted_by annotation since PhyData is only ever
accessed via a loops bounded by NumPhys:
lsi/mpi_cnfg.h: MPI_SAS_IO_UNIT0_PHY_DATA PhyData[] __counted_by(NumPhys); /* 10h */
mptsas.c: port_info->num_phys = buffer->NumPhys;
mptsas.c: for (i = 0; i < port_info->num_phys; i++) {
mptsas.c: mptsas_print_phy_data(ioc, &buffer->PhyData[i]);
mptsas.c: port_info->phy_info[i].phy_id = i;
mptsas.c: port_info->phy_info[i].port_id =
mptsas.c: buffer->PhyData[i].Port;
mptsas.c: port_info->phy_info[i].negotiated_link_rate =
mptsas.c: buffer->PhyData[i].NegotiatedLinkRate;
No binary differences are present after this conversion.
Link: https://github.com/KSPP/linux/issues/79 [1]
Signed-off-by: Kees Cook <kees@kernel.org>
Link: https://lore.kernel.org/r/20240711172821.123936-2-kees@kernel.org
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Replace the deprecated[1] use of a 1-element array in struct
_RAID_VOL0_SETTINGS with a modern flexible array.
Additionally add __counted_by annotation since PhysDisk is only ever
accessed via a loops bounded by NumPhysDisks:
lsi/mpi_cnfg.h: RAID_VOL0_PHYS_DISK PhysDisk[] __counted_by(NumPhysDisks); /* 28h */
mptbase.c: for (i = 0; i < buffer->NumPhysDisks; i++) {
mptbase.c: buffer->PhysDisk[i].PhysDiskNum, &phys_disk) != 0)
mptsas.c: for (i = 0; i < buffer->NumPhysDisks; i++) {
mptsas.c: buffer->PhysDisk[i].PhysDiskNum, &phys_disk) != 0)
mptsas.c: for (i = 0; i < buffer->NumPhysDisks; i++) {
mptsas.c: buffer->PhysDisk[i].PhysDiskNum, &phys_disk) != 0)
No binary differences are present after this conversion.
Link: https://github.com/KSPP/linux/issues/79 [1]
Signed-off-by: Kees Cook <kees@kernel.org>
Link: https://lore.kernel.org/r/20240711172821.123936-1-kees@kernel.org
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Updates to the usual drivers (ufs, lpfc, qla2xxx, mpi3mr, libsas).
The major update (which causes a conflict with block, see below) is
Christoph removing the queue limits and their associated block
helpers. The remaining patches are assorted minor fixes and
deprecated function updates plus a bit of constification.
Signed-off-by: James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCZkOnWyYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishYe7AP93XRN/
xnccJbSTTUL4FFGobq2CYXv58Na+FM/b/+/kEAD+PNi0LmHDdDTOaFUblMd9l4lj
mpvYLRvJ6ifnHX6WXAg=
=PVnL
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley:
"Updates to the usual drivers (ufs, lpfc, qla2xxx, mpi3mr, libsas).
The major update (which causes a conflict with block, see below) is
Christoph removing the queue limits and their associated block
helpers.
The remaining patches are assorted minor fixes and deprecated function
updates plus a bit of constification"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (141 commits)
scsi: mpi3mr: Sanitise num_phys
scsi: lpfc: Copyright updates for 14.4.0.2 patches
scsi: lpfc: Update lpfc version to 14.4.0.2
scsi: lpfc: Add support for 32 byte CDBs
scsi: lpfc: Change lpfc_hba hba_flag member into a bitmask
scsi: lpfc: Introduce rrq_list_lock to protect active_rrq_list
scsi: lpfc: Clear deferred RSCN processing flag when driver is unloading
scsi: lpfc: Update logging of protection type for T10 DIF I/O
scsi: lpfc: Change default logging level for unsolicited CT MIB commands
scsi: target: Remove unused list 'device_list'
scsi: iscsi: Remove unused list 'connlist_err'
scsi: ufs: exynos: Add support for Tensor gs101 SoC
scsi: ufs: exynos: Add some pa_dbg_ register offsets into drvdata
scsi: ufs: exynos: Allow max frequencies up to 267Mhz
scsi: ufs: exynos: Add EXYNOS_UFS_OPT_TIMER_TICK_SELECT option
scsi: ufs: exynos: Add EXYNOS_UFS_OPT_UFSPR_SECURE option
scsi: ufs: dt-bindings: exynos: Add gs101 compatible
scsi: qla2xxx: Fix debugfs output for fw_resource_count
scsi: qedf: Ensure the copied buf is NUL terminated
scsi: bfa: Ensure the copied buf is NUL terminated
...
The prior strscpy() replacement of strncpy() here expected the
manufacture_reply strings to be NUL-terminated, but it is possible
they are not, as the code pattern here shows, e.g., edev->vendor_id
being exactly 1 character larger than manufacture_reply->vendor_id,
and the replaced strncpy() was copying only up to the size of the
source character array. Replace this with memtostr(), which is the
unambiguous way to convert a maybe not-NUL-terminated character array
into a NUL-terminated string.
Reported-by: Charles Bertsch <cbertsch@cox.net>
Closes: https://lore.kernel.org/all/5445ba0f-3e27-4d43-a9ba-0cc22ada2fce@cox.net/
Fixes: 45e833f0e5bb ("scsi: message: fusion: Replace deprecated strncpy() with strscpy()")
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20240410023155.2100422-2-keescook@chromium.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Get drivers out of the business of having to call the block layer DMA
alignment limits helpers themselves.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20240409143748.980206-8-hch@lst.de
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The pointer 'hd' is being assigned a value that is not being read
later. The variable is redundant and can be removed.
Cleans up clang scan build warning:
warning: Although the value stored to 'hd' is used in the enclosing
expression, the value is never actually read from 'hd'
[deadcode.DeadStores]
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20240118122039.2541425-1-colin.i.king@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Detected by smatch.
Fixes: 17865dc2eccc ("scsi: message: fusion: Open-code mptfc_block_error_handler() for bus reset")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20231023073005.20766-1-hare@suse.de
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Hannes Reinecke <hare@suse.de> says:
Hi all,
(taking up an old thread:) here's the first batch of patches for my EH
rework. It modifies the reset callbacks for SCSI drivers such that
the final conversion to drop the 'struct scsi_cmnd' argument and use
the entity in question (host, bus, target, device) as the argument to
the SCSI EH callbacks becomes possible. The first part covers drivers
which just requires minor tweaks.
Link: https://lore.kernel.org/r/20231002154328.43718-1-hare@suse.de
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
When calling bus_reset we have potentially several ports to be reset, so
this patch open-codes the existing mptfc_block_error_handler() to wait for
all ports attached to this bus.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20231002154328.43718-4-hare@suse.de
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
mptscsih_dev_reset() is _not_ a device reset, but rather a target
reset. Nevertheless it's being used for either purpose. This patch adds a
correct implementation for mptscsih_dev_reset(), and renames the original
function to mptscsih_target_reset().
Signed-off-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20231002154328.43718-3-hare@suse.de
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Instead of passing in a function to mptfc_block_error_handler() we can as
well return a status and call the function afterwards.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20231002154328.43718-2-hare@suse.de
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
strncpy() is deprecated for use on NUL-terminated destination strings [1]
and as such we should prefer more robust and less ambiguous string
interfaces.
Since all these structs are copied out to userspace let's keep them
NUL-padded by using strscpy_pad() which guarantees NUL-termination of the
destination buffer while also providing the NUL-padding behavior that
strncpy() has.
Let's also opt to use the more idiomatic strscpy() usage of: 'dest, src,
sizeof(dest)' in cases where the compiler can determine the size of the
destination buffer. Do this for all cases of strscpy...() in this file.
To be abundantly sure we don't leak stack data out to user space let's also
change a strscpy() to strscpy_pad(). This strscpy() was introduced in
commit dbe37c71d124 ("scsi: message: fusion: Replace all non-returning
strlcpy() with strscpy()")
Note that since we are creating these structs with a copy_from_user() and
modifying fields and then copying back out to the user it is probably OK
not to explicitly NUL-pad everything as any data leak is probably just data
from the user themselves. If this is too eager, let's opt for strscpy()
which is still in the spirit of removing deprecated strncpy() usage
treewide.
Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1]
Link: https://github.com/KSPP/linux/issues/90
Cc: linux-hardening@vger.kernel.org
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Justin Stitt <justinstitt@google.com>
Link: https://lore.kernel.org/r/20230927-strncpy-drivers-message-fusion-mptctl-c-v1-1-bb2eddc1743c@google.com
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
In a future patch HAS_IOPORT=n will result in inb()/outb() and friends not
being declared. We thus need to add HAS_IOPORT as dependency for those
drivers using them.
Co-developed-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Link: https://lore.kernel.org/r/20230522105049.1467313-22-schnelle@linux.ibm.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
- Mark arch_cpu_idle_dead() __noreturn, make all architectures & drivers that did
this inconsistently follow this new, common convention, and fix all the fallout
that objtool can now detect statically.
- Fix/improve the ORC unwinder becoming unreliable due to UNWIND_HINT_EMPTY ambiguity,
split it into UNWIND_HINT_END_OF_STACK and UNWIND_HINT_UNDEFINED to resolve it.
- Fix noinstr violations in the KCSAN code and the lkdtm/stackleak code.
- Generate ORC data for __pfx code
- Add more __noreturn annotations to various kernel startup/shutdown/panic functions.
- Misc improvements & fixes.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=NwEV
-----END PGP SIGNATURE-----
Merge tag 'objtool-core-2023-04-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool updates from Ingo Molnar:
- Mark arch_cpu_idle_dead() __noreturn, make all architectures &
drivers that did this inconsistently follow this new, common
convention, and fix all the fallout that objtool can now detect
statically
- Fix/improve the ORC unwinder becoming unreliable due to
UNWIND_HINT_EMPTY ambiguity, split it into UNWIND_HINT_END_OF_STACK
and UNWIND_HINT_UNDEFINED to resolve it
- Fix noinstr violations in the KCSAN code and the lkdtm/stackleak code
- Generate ORC data for __pfx code
- Add more __noreturn annotations to various kernel startup/shutdown
and panic functions
- Misc improvements & fixes
* tag 'objtool-core-2023-04-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (52 commits)
x86/hyperv: Mark hv_ghcb_terminate() as noreturn
scsi: message: fusion: Mark mpt_halt_firmware() __noreturn
x86/cpu: Mark {hlt,resume}_play_dead() __noreturn
btrfs: Mark btrfs_assertfail() __noreturn
objtool: Include weak functions in global_noreturns check
cpu: Mark nmi_panic_self_stop() __noreturn
cpu: Mark panic_smp_self_stop() __noreturn
arm64/cpu: Mark cpu_park_loop() and friends __noreturn
x86/head: Mark *_start_kernel() __noreturn
init: Mark start_kernel() __noreturn
init: Mark [arch_call_]rest_init() __noreturn
objtool: Generate ORC data for __pfx code
x86/linkage: Fix padding for typed functions
objtool: Separate prefix code from stack validation code
objtool: Remove superfluous dead_end_function() check
objtool: Add symbol iteration helpers
objtool: Add WARN_INSN()
scripts/objdump-func: Support multiple functions
context_tracking: Fix KCSAN noinstr violation
objtool: Add stackleak instrumentation to uaccess safe list
...
mptlan_probe() calls mpt_register_lan_device() which initializes the
&priv->post_buckets_task workqueue. A call to
mpt_lan_wake_post_buckets_task() will subsequently start the work.
During driver unload in mptlan_remove() the following race may occur:
CPU0 CPU1
|mpt_lan_post_receive_buckets_work()
mptlan_remove() |
free_netdev() |
kfree(dev); |
|
| dev->mtu
| //use
Fix this by finishing the work prior to cleaning up in mptlan_remove().
[mkp: we really should remove mptlan instead of attempting to fix it]
Signed-off-by: Zheng Wang <zyytlz.wz@163.com>
Link: https://lore.kernel.org/r/20230318081635.796479-1-zyytlz.wz@163.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Bart Van Assche <bvanassche@acm.org> says:
It helps humans and the compiler if it is made explicit that SCSI host
templates are not modified. Hence this patch series that constifies most
SCSI host templates. Please consider this patch series for the next merge
window.
Link: https://lore.kernel.org/r/20230322195515.1267197-1-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Like commit c4f135d64382 ("workqueue: Wrap flush_workqueue() using a
macro") says, flush_scheduled_work() is dangerous and will be forbidden.
Commit 4d4109d0eb69 ("[SCSI] mpt fusion: Power Management fixes for MPT SAS
PCI-E controllers") added flush_scheduled_work() call into
mptscsih_suspend(). As of commit 4d4109d0eb69, there were several
schedule{,_delayed}_work() calls where flush_scheduled_work() from
mptscsih_suspend() meant to wait for completion. However, which work items
this flush_scheduled_work() call was for was not explained.
Then, schedule_work("struct mptsas_hotplug_event"->work) and
schedule_work(MPT_ADAPTER->sas_persist_task) have been removed by commit
3eb0822c6740 ("[SCSI] mpt fusion: Firmware event implementation using
seperate WorkQueue"), and schedule_work("struct
mptsas_send_discovery_event"->work) has been removed by commit f9c34022eae9
("[SCSI] mpt fusion: SAS topology scan changes, expander events").
There still remains schedule_work("struct work_queue_wrapper"->work) call
in mptspi.c and schedule_delayed_work("struct mpt_lan_priv"->work) call in
mptlan.c , but I guess that these are not work items which commit
4d4109d0eb69 meant to wait for completion because these are not per
MPT_ADAPTER work items. If my guess is correct, we no longer need to call
flush_scheduled_work() from mptscsih_suspend().
Link: https://lore.kernel.org/r/0b9ebcfb-b647-1381-0653-b54528a64a86@I-love.SAKURA.ne.jp
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
MPT_ADAPTER->sas_persist_task is no longer used since commit 3eb0822c6740
("[SCSI] mpt fusion: Firmware event implementation using seperate
WorkQueue").
Link: https://lore.kernel.org/r/b2ca2164-5347-8ec1-d8b6-3225df864173@I-love.SAKURA.ne.jp
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Commit 6600593cbd93 ("block: rename BLK_EH_NOT_HANDLED to BLK_EH_DONE")
made it impossible for .eh_timed_out() implementations to call
scsi_done() without causing a crash.
Restore support for SCSI timeout handlers to call scsi_done() as follows:
* Change all .eh_timed_out() handlers as follows:
- Change the return type into enum scsi_timeout_action.
- Change BLK_EH_RESET_TIMER into SCSI_EH_RESET_TIMER.
- Change BLK_EH_DONE into SCSI_EH_NOT_HANDLED.
* In scsi_timeout(), convert the SCSI_EH_* values into BLK_EH_* values.
Reviewed-by: Lee Duncan <lduncan@suse.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Mike Christie <michael.christie@oracle.com>
Cc: Hannes Reinecke <hare@suse.de>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20221018202958.1902564-3-bvanassche@acm.org
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Variable iocnum is assigned a value that is never read, the assignment and
hence the variable are redundant can be removed. Also update the comment to
reflect the correct name of the variable being updated.
Cleans up clang-scan warning:
drivers/message/fusion/mptctl.c:641:8: warning: Although the value stored
to 'iocnum' is used in the enclosing expression, the value is never
actually read from 'iocnum' [deadcode.DeadStores]
Link: https://lore.kernel.org/r/20220805113214.2339022-1-colin.i.king@gmail.com
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The following warning showed up when compiling with W=1.
drivers/message/fusion/mptctl.c: In function ‘mptctl_hp_hostinfo’:
drivers/message/fusion/mptctl.c:2337:8: warning: variable ‘retval’ set but not used [-Wunused-but-set-variable]
int retval;
Fixing by removing the variable.
Link: https://lore.kernel.org/r/20220317030325.30526-1-alexander.vorwerk@stud.uni-goettingen.de
Signed-off-by: Alexander Vorwerk <alexander.vorwerk@stud.uni-goettingen.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Variable dmp is being assigned a value that is never read, the variable is
redundant and can be removed.
Cleans up clang scan build warning:
drivers/message/fusion/mptbase.c:6667:39: warning: Although
the value stored to 'dmp' is used in the enclosing expression,
the value is never actually read from 'dmp' [deadcode.DeadStores]
Link: https://lore.kernel.org/r/20220318003927.81471-1-colin.i.king@gmail.com
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Just a few lines below this kzalloc() we have a mutex_lock() which can
sleep.
Moreover, the only way to call this function is when a delayed work is
schedule. And delayed work can sleep:
INIT_DELAYED_WORK(&fw_event->work, mptsas_firmware_event_work);
--> mptsas_firmware_event_work()
--> mptsas_send_link_status_event()
--> mptsas_expander_add()
So there is really no good reason to use GFP_ATOMIC here. Change it to
GFP_KERNEL to give more opportunities to the kernel.
Link: https://lore.kernel.org/r/eccb2179ce800529851ed4fabc9d3f95fbbf7d7f.1644906731.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Pci_driver probe functions aren't called with locks held and thus don't
need GFP_ATOMIC. Use GFP_KERNEL instead.
Problem found with Coccinelle.
Link: https://lore.kernel.org/r/20220210204223.104181-9-Julia.Lawall@inria.fr
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
In [1], Christoph Hellwig has proposed to remove the wrappers in
include/linux/pci-dma-compat.h.
Some reasons why this API should be removed have been given by Julia
Lawall in [2].
When memory is allocated in kbuf_alloc_2_sgl() GFP_KERNEL can be used
because this function already uses the GFP_USER flag for some memory
allocation and not spin_lock is taken in the between.
When memory is allocated in mptctl_do_mpt_command() GFP_KERNEL can be used
because this function already uses copy_from_user() and this function can
sleep.
When memory is allocated in mptctl_hp_hostinfo() GFP_KERNEL can be used
because this function already uses mpt_config() and this function has an
explicit might_sleep().
When memory is allocated in mptctl_hp_targetinfo() GFP_KERNEL can be used
because this function already uses mpt_config() and this function has an
explicit might_sleep().
[1]: https://lore.kernel.org/kernel-janitors/20200421081257.GA131897@infradead.org/
[2]: https://lore.kernel.org/kernel-janitors/alpine.DEB.2.22.394.2007120902170.2424@hadrien/
Link: https://lore.kernel.org/r/516375d6d06114484533baf03aae351306100246.1641500561.git.christophe.jaillet@wanadoo.fr
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
