timer_delete[_sync]() replaces del_timer[_sync](). Convert the whole tree
over and remove the historical wrapper inlines.
Conversion was done with coccinelle plus manual fixups where necessary.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
across all blinking LEDs and falls back to software blink if different
frequencies are requested.
* trigger: netdev: Allow configuring LED blink interval via .blink_set
even when HW offload (.hw_control) is enabled.
* led-core: Fix a race condition where a quick LED_OFF followed by another
brightness set could leave the LED off incorrectly, especially
noticeable after the introduction of the ordered workqueue.
* qcom-lpg: Add support for 6-bit PWM resolution alongside the existing
9-bit support.
* qcom-lpg: Fix PWM value capping to respect the selected resolution
(6-bit or 9-bit) for normal PWMs.
* qcom-lpg: Fix PWM value capping to respect the selected resolution for
Hi-Res PWMs.
* qcom-lpg: Fix calculation of the best period for Hi-Res PWMs to prevent
requested duty cycles from exceeding the maximum allowed by the
selected resolution.
* st1202: Add a check for the error code returned by devm_mutex_init().
* pwm-multicolor: Add a check for the return value of
fwnode_property_read_u32().
* st1202: Ensure hardware initialization (st1202_setup) happens before DT
node processing (st1202_dt_init).
* Kconfig: leds-st1202: Add select LEDS_TRIGGER_PATTERN as it's required
by the driver.
* lp8860: Drop unneeded explicit assignment to REGCACHE_NONE.
* pca955x: Refactor code with helper functions and rename some
functions/variables for clarity.
* pca955x: Pass driver data pointers instead of the I2C client to helper
functions.
* pca955x: Optimize probe LED selection logic to reduce I2C operations.
* pca955x: Revert the removal of pca95xx_num_led_regs() (renaming it to
pca955x_num_led_regs) as it's needed for HW blink support.
* st1202: Refactor st1202_led_set() to use the !! operator for boolean
conversion.
* st1202: Minor spacing and proofreading edits in comments.
* Directory Rename: Rename the drivers/leds/simple directory to
drivers/leds/simatic as the drivers within are not simple.
* mlxcpld: Remove unused include of acpi.h.
* nic78bx: Tidy up the ACPI ID table (remove ACPI_PTR, use
mod_devicetable.h, remove explicit driver_data initializer).
* tlc591xx: Convert text binding to YAML format, add child node
constraints, and fix typos/formatting in the example.
* qcom-lpg: Document the qcom,pm8937-pwm compatible string as a
fallback for qcom,pm8916-pwm.
-----BEGIN PGP SIGNATURE-----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=cEhV
-----END PGP SIGNATURE-----
Merge tag 'leds-next-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds
Pull LED updates from Lee Jones:
- pca955x: Add HW blink support, utilizing PWM0. It supports one
frequency across all blinking LEDs and falls back to software blink
if different frequencies are requested.
- trigger: netdev: Allow configuring LED blink interval via .blink_set
even when HW offload (.hw_control) is enabled.
- led-core: Fix a race condition where a quick LED_OFF followed by
another brightness set could leave the LED off incorrectly,
especially noticeable after the introduction of the ordered
workqueue.
- qcom-lpg: Add support for 6-bit PWM resolution alongside the existing
9-bit support.
- qcom-lpg: Fix PWM value capping to respect the selected resolution
(6-bit or 9-bit) for normal PWMs.
- qcom-lpg: Fix PWM value capping to respect the selected resolution
for Hi-Res PWMs.
- qcom-lpg: Fix calculation of the best period for Hi-Res PWMs to
prevent requested duty cycles from exceeding the maximum allowed by
the selected resolution.
- st1202: Add a check for the error code returned by devm_mutex_init().
- pwm-multicolor: Add a check for the return value of
fwnode_property_read_u32().
- st1202: Ensure hardware initialization (st1202_setup) happens before
DT node processing (st1202_dt_init).
- Kconfig: leds-st1202: Add select LEDS_TRIGGER_PATTERN as it's
required by the driver.
- lp8860: Drop unneeded explicit assignment to REGCACHE_NONE.
- pca955x: Refactor code with helper functions and rename some
functions/variables for clarity.
- pca955x: Pass driver data pointers instead of the I2C client to
helper functions.
- pca955x: Optimize probe LED selection logic to reduce I2C operations.
- pca955x: Revert the removal of pca95xx_num_led_regs() (renaming it to
pca955x_num_led_regs) as it's needed for HW blink support.
- st1202: Refactor st1202_led_set() to use the !! operator for boolean
conversion.
- st1202: Minor spacing and proofreading edits in comments.
- Directory Rename: Rename the drivers/leds/simple directory to
drivers/leds/simatic as the drivers within are not simple.
- mlxcpld: Remove unused include of acpi.h.
- nic78bx: Tidy up the ACPI ID table (remove ACPI_PTR, use
mod_devicetable.h, remove explicit driver_data initializer).
- tlc591xx: Convert text binding to YAML format, add child node
constraints, and fix typos/formatting in the example.
- qcom-lpg: Document the qcom,pm8937-pwm compatible string as a
fallback for qcom,pm8916-pwm.
* tag 'leds-next-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds: (23 commits)
leds: nic78bx: Tidy up ACPI ID table
leds: mlxcpld: Remove unused ACPI header inclusion
leds: rgb: leds-qcom-lpg: Fix calculation of best period Hi-Res PWMs
leds: rgb: leds-qcom-lpg: Fix pwm resolution max for Hi-Res PWMs
leds: rgb: leds-qcom-lpg: Fix pwm resolution max for normal PWMs
leds: Rename simple directory to simatic
leds: Kconfig: leds-st1202: Add select for required LEDS_TRIGGER_PATTERN
leds: leds-st1202: Spacing and proofreading editing
leds: leds-st1202: Initialize hardware before DT node child operations
leds: pwm-multicolor: Add check for fwnode_property_read_u32
leds: rgb: leds-qcom-lpg: Add support for 6-bit PWM resolution
leds: Fix LED_OFF brightness race
Revert "leds-pca955x: Remove the unused function pca95xx_num_led_regs()"
leds: st1202: Refactor st1202_led_set() to use !! operator for boolean conversion
dt-bindings: leds: qcom-lpg: Document PM8937 PWM compatible
leds: pca955x: Add HW blink support
leds: pca955x: Optimize probe LED selection
leds: pca955x: Use pointers to driver data rather than I2C client
leds: pca955x: Refactor with helper functions and renaming
dt-bindings: leds: Convert leds-tlc591xx.txt to yaml format
...
* Added core MFD driver.
* Added charger driver.
* Added devicetree bindings for the charger and MFD core.
* Added Haptic controller support via the input subsystem.
* Added LED support.
* Added support to simple-mfd-i2c for fuel gauge and hwmon.
* Samsung S2MPU05 (Exynos7870 PMIC):
* Added core MFD support.
* Added Regulator support for 21 LDOs and 5 BUCKs.
* Added devicetree bindings for regulators and the PMIC core.
* TI TPS65215 & TPS65214:
* Added support to the existing TPS65219 driver.
* Added devicetree bindings.
* STMicroelectronics STM32MP25:
* Added support to the stm32-timers MFD driver.
* Added devicetree bindings.
* Congatec Board Controller (CGBC):
* Added HWMON support for internal sensors.
* Added support for the conga-SA8 module.
* Microchip LAN969X:
* Enabled the at91-usart MFD driver for this architecture.
* MediaTek MT6359:
* Added mfd_cell for mt6359-accdet to allow its driver to probe.
* AXP20X (AXP717): Added AXP717_TS_PIN_CFG register to writeable
regs for temperature sensor configuration.
* SM501: Switched to using BIT() macro to mitigate potential
integer overflows in GPIO functions.
* ENE KB3930: Added a NULL pointer check for off_gpios during
probe to prevent potential dereference.
* SYSCON: Added a check for invalid resource size to prevent
issues from DT misconfiguration.
* CGBC: Corrected signedness issues in cgbc_session_request.
* intel_soc_pmic_chtdc_ti / intel_soc_pmic_crc: Removed unneeded
explicit assignment to REGCACHE_NONE.
* ipaq-micro / tps65010: Switched to using str_enable_disable()
helpers for clarity and potential size reduction.
* upboard-fpga: Removed unnecessary ACPI_PTR() annotation.
* max8997: Removed unused max8997_irq_exit() function, using
devm_* helpers instead.
* lp3943: Dropped unused #include <linux/pwm.h> from the header
file.
* db8500-prcmu: Removed needless return statements in void APIs.
* qnap-mcu: Replaced commas with semicolons between expressions
for correctness.
* STA2X11: Removed the core MFD driver as the underlying
platform support was removed.
* EZX-PCAP: Removed the unused pcap_adc_sync function.
* PCF50633 (OpenMoko PMIC): Removed the entire driver (core, adc,
gpio, irq) as the underlying s3c24xx platform support was removed.
* Converted fsl,mcu-mpc8349emitx binding to YAML.
* Added qcom,msm8937-tcsr compatible.
* Added microchip,sama7d65-flexcom compatible.
* Added rockchip,rk3528-qos syscon compatible.
* Added airoha,en7581-pbus-csr syscon compatible.
* Added microchip,sama7d65-ddr3phy syscon compatible.
* Added microchip,sama7d65-sfrbu syscon compatible.
-----BEGIN PGP SIGNATURE-----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=ntF1
-----END PGP SIGNATURE-----
Merge tag 'mfd-next-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
"Maxim MAX77705:
- Added core MFD driver.
- Added charger driver.
- Added devicetree bindings for the charger and MFD core.
- Added Haptic controller support via the input subsystem.
- Added LED support.
- Added support to simple-mfd-i2c for fuel gauge and hwmon.
Samsung S2MPU05 (Exynos7870 PMIC):
- Added core MFD support.
- Added Regulator support for 21 LDOs and 5 BUCKs.
- Added devicetree bindings for regulators and the PMIC core.
TI TPS65215 & TPS65214:
- Added support to the existing TPS65219 driver.
- Added devicetree bindings.
STMicroelectronics STM32MP25:
- Added support to the stm32-timers MFD driver.
- Added devicetree bindings.
Congatec Board Controller (CGBC):
- Added HWMON support for internal sensors.
- Added support for the conga-SA8 module.
Microchip LAN969X:
- Enabled the at91-usart MFD driver for this architecture.
MediaTek MT6359:
- Added mfd_cell for mt6359-accdet to allow its driver to probe.
Other misc driver updates:
- AXP20X (AXP717): Added AXP717_TS_PIN_CFG register to writeable regs
for temperature sensor configuration.
- SM501: Switched to using BIT() macro to mitigate potential integer
overflows in GPIO functions.
- ENE KB3930: Added a NULL pointer check for off_gpios during probe
to prevent potential dereference.
- SYSCON: Added a check for invalid resource size to prevent issues
from DT misconfiguration.
- CGBC: Corrected signedness issues in cgbc_session_request
- intel_soc_pmic_chtdc_ti / intel_soc_pmic_crc: Removed unneeded
explicit assignment to REGCACHE_NONE.
- ipaq-micro / tps65010: Switched to using str_enable_disable()
helpers for clarity and potential size reduction.
- upboard-fpga: Removed unnecessary ACPI_PTR() annotation.
- max8997: Removed unused max8997_irq_exit() function, using devm_*
helpers instead.
- lp3943: Dropped unused #include <linux/pwm.h> from the header file.
- db8500-prcmu: Removed needless return statements in void APIs.
- qnap-mcu: Replaced commas with semicolons between expressions for
correctness.
- STA2X11: Removed the core MFD driver as the underlying platform
support was removed.
- EZX-PCAP: Removed the unused pcap_adc_sync function.
- PCF50633 (OpenMoko PMIC): Removed the entire driver (core, adc,
gpio, irq) as the underlying s3c24xx platform support was removed.
Devicetree updates:
- Converted fsl,mcu-mpc8349emitx binding to YAML
- Added qcom,msm8937-tcsr compatible
- Added microchip,sama7d65-flexcom compatible
- Added rockchip,rk3528-qos syscon compatible
- Added airoha,en7581-pbus-csr syscon compatible
- Added microchip,sama7d65-ddr3phy syscon compatible
- Added microchip,sama7d65-sfrbu syscon compatible"
* tag 'mfd-next-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (49 commits)
mfd: cgbc-core: Add support for conga-SA8
dt-bindings: mfd: syscon: Add microchip,sama7d65-sfrbu
dt-bindings: mfd: syscon: Add microchip,sama7d65-ddr3phy
mfd: cgbc: Add support for HWMON
dt-bindings: mfd: syscon: Add the pbus-csr node for Airoha EN7581 SoC
mfd: cgbc-core: Cleanup signedness in cgbc_session_request()
mfd: pcf50633: Remove remaining PCF50633 support
mfd: pcf50633: Remove unused platform IRQ code
mfd: pcF50633-gpio: Remove unused driver
mfd: pcf50633-adc: Remove unused driver
mfd: qnap-mcu: Convert commas to semicolons in qnap_mcu_exec()
mfd: mt6397-core: Add mfd_cell for mt6359-accdet
dt-bindings: mfd: syscon: Add rk3528 QoS register compatible
dt-bindings: mfd: atmel,sama5d2-flexcom: Add microchip,sama7d65-flexcom
mfd: ezx-pcap: Remove unused pcap_adc_sync
mfd: db8500-prcmu: Remove needless return in three void APIs
mfd: Remove STA2x11 core driver
mfd: max77620: Allow building as a module
mfd: ene-kb3930: Fix a potential NULL pointer dereference
dt-bindings: mfd: qcom,tcsr: Add compatible for MSM8937
...
GPIO core:
- add sanitization of return values of GPIO provider callbacks so that invalid
ones don't get propagated to user-space
- add new variants of the line setter callbacks for GPIO providers that return
an integer and allow to indicate driver errors to the GPIO core
- change the interface of all gpiod_set_value() variants to return an integer
thus becoming able to indicate failures in the underlying layer to callers
- drop unneeded ERR_CAST in gpiolib-acpi
- use for_each_if() where applicable
- provide gpiod_multi_set_value_cansleep() as a new, simpler interface to
gpiod_set_array_value_cansleep() and use it across several drivers treewide
- reduce the number of atomic reads of the descriptor flags in gpiolib debugfs
code
- simplify for_each_hwgpio_in_range() and for_each_requested_gpio_in_range()
- add support for three-cell GPIO specifiers in GPIO OF code
- don't build HTE (hardware timestamp engine) GPIO code with the HTE subsystem
disabled in Kconfig
- unduplicate calls to gpiod_direction_input_nonotify()
- rework the handling of the valid_mask property of GPIO chips: don't allow
drivers to set it as it should only be handled by GPIO core and start
actually enforcing it in GPIO core for *all* drivers, not only the ones
implementing a custom request() callback
- get the `ngpios` property from the fwnode of the GPIO chip, not its device in
order to handle multi-bank GPIO chips
Driver improvements:
- convert a part of the GPIO drivers under drivers/gpio/ to using the new value
setter callbacks
- convert several drivers to using automatic lock guards from cleanup.h
- allow building gpio-bt8xx with COMPILE_TEST=y
- refactor gpio-74x164 (use devres, cleanup helpers, __counted_by() and bits.h
macros)
- refactor gpio-latch (use generic device properties, lock guards and some
local variables for better readability)
- refactor gpio-xilinx (improve the usage of the bitmap API)
- support multiple virtual GPIO controller instances in gpio-virtio
- allow gpio-regmap to use the standard `ngpios` property from GPIOLIB
- factor out the common code for synchronous probing of virtual GPIO devices
into its own library
- use str_enable_disable(), str_high_low() and other string helpers where
applicable
- extend the gpio-mmio abstraction layer to allow calling into the pinctrl
back-end when setting direction
- convert gpio-vf610 to using the gpio-mmio library
- use more devres in gpio-adnp
- add support for reset-gpios in gpio-pcf857x
- add support for more models to gpio-loongson-64bit
DT bindings:
- add new compatibles to gpio-vf610 and gpio-loongson
- add missing gpio-ranges property to gpio-mvebu
- add reset-gpios to nxp,pcf8575
- enable gpio-hog parsing in ast2400-gpio
Misc:
- coding style improvements
- kerneldoc fixes
- includes reordering
- updates to the TODO list
-----BEGIN PGP SIGNATURE-----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=h7Hv
-----END PGP SIGNATURE-----
Merge tag 'gpio-updates-for-v6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio updates from Bartosz Golaszewski:
"There are no new drivers this time but several changes to the core
GPIO framework and various driver updates.
This release cycle, we're starting a relatively straightforward but
tedious rework of the GPIO consumer API: for historical reasons, the
gpiod_set_value() variants would return void. Not only that but the
GPIO provider interface does not even allow drivers to return a value
to GPIO core. This is because initial GPIO controllers would be MMIO
based and could not fail. We've had I2C, SPI and USB controllers for
years too but no way of indicating failures to callers.
This changes the consumer interface, adds new provider callbacks and
starts converting the drivers under drivers/gpio/ to using them. Once
this gets upstream, we'll keep on converting GPIO drivers that live
elsewhere and once there are no more users of the old callbacks, we'll
remove them and rename the new ones to the previous name. I imagine
the last step would happen in one sweeping change like what you did
for the remove_new() -> remove() renaming.
We've also addressed an issue where invalid return values from GPIO
drivers would get propagated to user-space by adding some
GPIO-core-level sanitization. Again: not a complex change but way
overdue.
Other than that: lots of driver and core refactoring, DT-bindings
changes and some other minor changes like coding style fixes or header
reordering.
GPIO core:
- add sanitization of return values of GPIO provider callbacks so
that invalid ones don't get propagated to user-space
- add new variants of the line setter callbacks for GPIO providers
that return an integer and allow to indicate driver errors to the
GPIO core
- change the interface of all gpiod_set_value() variants to return an
integer thus becoming able to indicate failures in the underlying
layer to callers
- drop unneeded ERR_CAST in gpiolib-acpi
- use for_each_if() where applicable
- provide gpiod_multi_set_value_cansleep() as a new, simpler
interface to gpiod_set_array_value_cansleep() and use it across
several drivers treewide
- reduce the number of atomic reads of the descriptor flags in
gpiolib debugfs code
- simplify for_each_hwgpio_in_range() and
for_each_requested_gpio_in_range()
- add support for three-cell GPIO specifiers in GPIO OF code
- don't build HTE (hardware timestamp engine) GPIO code with the HTE
subsystem disabled in Kconfig
- unduplicate calls to gpiod_direction_input_nonotify()
- rework the handling of the valid_mask property of GPIO chips: don't
allow drivers to set it as it should only be handled by GPIO core
and start actually enforcing it in GPIO core for *all* drivers, not
only the ones implementing a custom request() callback
- get the `ngpios` property from the fwnode of the GPIO chip, not its
device in order to handle multi-bank GPIO chips
Driver improvements:
- convert a part of the GPIO drivers under drivers/gpio/ to using the
new value setter callbacks
- convert several drivers to using automatic lock guards from
cleanup.h
- allow building gpio-bt8xx with COMPILE_TEST=y
- refactor gpio-74x164 (use devres, cleanup helpers, __counted_by()
and bits.h macros)
- refactor gpio-latch (use generic device properties, lock guards and
some local variables for better readability)
- refactor gpio-xilinx (improve the usage of the bitmap API)
- support multiple virtual GPIO controller instances in gpio-virtio
- allow gpio-regmap to use the standard `ngpios` property from
GPIOLIB
- factor out the common code for synchronous probing of virtual GPIO
devices into its own library
- use str_enable_disable(), str_high_low() and other string helpers
where applicable
- extend the gpio-mmio abstraction layer to allow calling into the
pinctrl back-end when setting direction
- convert gpio-vf610 to using the gpio-mmio library
- use more devres in gpio-adnp
- add support for reset-gpios in gpio-pcf857x
- add support for more models to gpio-loongson-64bit
DT bindings:
- add new compatibles to gpio-vf610 and gpio-loongson
- add missing gpio-ranges property to gpio-mvebu
- add reset-gpios to nxp,pcf8575
- enable gpio-hog parsing in ast2400-gpio
Misc:
- coding style improvements
- kerneldoc fixes
- includes reordering
- updates to the TODO list"
* tag 'gpio-updates-for-v6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (119 commits)
gpio: TODO: add an item to track reworking the sysfs interface
gpio: TODO: add an item to track the conversion to the new value setters
gpio: TODO: add delimiters between tasks for better readability
gpio: TODO: remove the pinctrl integration task
gpio: TODO: remove task duplication
gpio: TODO: remove the item about the new debugfs interface
gpio: da9055: use new line value setter callbacks
gpio: da9052: use new line value setter callbacks
gpio: cs5535: use new line value setter callbacks
gpio: crystalcove: use new line value setter callbacks
gpio: cros-ec: use new line value setter callbacks
gpio: creg-snps: use new line value setter callbacks
gpio: cgbc: use new line value setter callbacks
gpio: bt8xx: use new line value setter callbacks
gpio: bt8xx: use lock guards
gpio: bt8xx: allow to build the module with COMPILE_TEST=y
gpio: bd9571mwv: use new line value setter callbacks
gpio: bd71828: use new line value setter callbacks
gpio: bd71815: use new line value setter callbacks
gpio: bcm-kona: use new line value setter callbacks
...
hrtimers are initialized with hrtimer_init() and a subsequent store to
the callback pointer. This turned out to be suboptimal for the upcoming
Rust integration and is obviously a silly implementation to begin with.
This cleanup replaces the hrtimer_init(T); T->function = cb; sequence
with hrtimer_setup(T, cb);
The conversion was done with Coccinelle and a few manual fixups.
Once the conversion has completely landed in mainline, hrtimer_init()
will be removed and the hrtimer::function becomes a private member.
-----BEGIN PGP SIGNATURE-----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=bYAX
-----END PGP SIGNATURE-----
Merge tag 'timers-cleanups-2025-03-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer cleanups from Thomas Gleixner:
"A treewide hrtimer timer cleanup
hrtimers are initialized with hrtimer_init() and a subsequent store to
the callback pointer. This turned out to be suboptimal for the
upcoming Rust integration and is obviously a silly implementation to
begin with.
This cleanup replaces the hrtimer_init(T); T->function = cb; sequence
with hrtimer_setup(T, cb);
The conversion was done with Coccinelle and a few manual fixups.
Once the conversion has completely landed in mainline, hrtimer_init()
will be removed and the hrtimer::function becomes a private member"
* tag 'timers-cleanups-2025-03-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (100 commits)
wifi: rt2x00: Switch to use hrtimer_update_function()
io_uring: Use helper function hrtimer_update_function()
serial: xilinx_uartps: Use helper function hrtimer_update_function()
ASoC: fsl: imx-pcm-fiq: Switch to use hrtimer_setup()
RDMA: Switch to use hrtimer_setup()
virtio: mem: Switch to use hrtimer_setup()
drm/vmwgfx: Switch to use hrtimer_setup()
drm/xe/oa: Switch to use hrtimer_setup()
drm/vkms: Switch to use hrtimer_setup()
drm/msm: Switch to use hrtimer_setup()
drm/i915/request: Switch to use hrtimer_setup()
drm/i915/uncore: Switch to use hrtimer_setup()
drm/i915/pmu: Switch to use hrtimer_setup()
drm/i915/perf: Switch to use hrtimer_setup()
drm/i915/gvt: Switch to use hrtimer_setup()
drm/i915/huc: Switch to use hrtimer_setup()
drm/amdgpu: Switch to use hrtimer_setup()
stm class: heartbeat: Switch to use hrtimer_setup()
i2c: Switch to use hrtimer_setup()
iio: Switch to use hrtimer_setup()
...
Tidy up ACPI ID table:
- Drop ACPI_PTR() and hence replace acpi.h with mod_devicetable.h and
other necessary headers
- Remove explicit driver_data initializer
- Drop comma in the terminator entry
With that done, extend compile test coverage.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20250313161630.415515-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Lee Jones <lee@kernel.org>
When determining the actual best period by looping through all
possible PWM configs, the resolution currently used is based on
bit shift value which is off-by-one above the possible maximum
PWM value allowed.
So subtract one from the resolution before determining the best
period so that the maximum duty cycle requested by the PWM user
won't result in a value above the maximum allowed by the selected
resolution.
Cc: stable@vger.kernel.org # 6.4
Fixes: b00d2ed37617 ("leds: rgb: leds-qcom-lpg: Add support for high resolution PWM")
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Sebastian Reichel <sre@kernel.org>
Link: https://lore.kernel.org/r/20250305-leds-qcom-lpg-fix-max-pwm-on-hi-res-v4-3-bfe124a53a9f@linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>
Ideally, the requested duty cycle should never translate to a PWM
value higher than the selected resolution (PWM size), but currently the
best matched period is never reported back to the PWM consumer, so the
consumer will still be using the requested period which is higher than
the best matched one. This will result in PWM consumer requesting
duty cycle values higher than the allowed PWM value.
For example, a consumer might request a period of 5ms while the best
(closest) period the PWM hardware will do is 4.26ms. For this best
matched resolution, if the selected resolution is 8-bit wide, when
the consumer asks for a duty cycle of 5ms, the PWM value will be 300,
which is outside of what the resolution allows. This will happen with
all possible resolutions when selected.
Since for these Hi-Res PWMs, the current implementation is capping the PWM
value at a 15-bit resolution, even when lower resolutions are selected,
the value will be wrapped around by the HW internal logic to the selected
resolution.
Fix the issue by capping the PWM value to the maximum value allowed by
the selected resolution.
Cc: stable@vger.kernel.org # 6.4
Fixes: b00d2ed37617 ("leds: rgb: leds-qcom-lpg: Add support for high resolution PWM")
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Reviewed-by: Sebastian Reichel <sre@kernel.org>
Link: https://lore.kernel.org/r/20250305-leds-qcom-lpg-fix-max-pwm-on-hi-res-v4-2-bfe124a53a9f@linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>
Ideally, the requested duty cycle should never translate to a PWM
value higher than the selected resolution (PWM size), but currently the
best matched period is never reported back to the PWM consumer, so the
consumer will still be using the requested period which is higher than
the best matched one. This will result in PWM consumer requesting
duty cycle values higher than the allowed PWM value.
For example, a consumer might request a period of 5ms while the best
(closest) period the PWM hardware will do is 4.26ms. For this best
matched resolution, if the selected resolution is 9-bit wide, when
the consumer asks for a duty cycle of 5ms, the PWM value will be 600,
which is outside of what the resolution allows. Similar will happen
if the 6-bit resolution is selected.
Since for these normal PWMs (non Hi-Res), the current implementation is
capping the PWM value at a 9-bit resolution, even when the 6-bit
resolution is selected, the value will be wrapped around to 6-bit value
by the HW internal logic.
Fix the issue by capping the PWM value to the maximum value allowed by
the selected resolution.
Fixes: 7a3350495d9a ("leds: rgb: leds-qcom-lpg: Add support for 6-bit PWM resolution")
Suggested-by: Anjelique Melendez <anjelique.melendez@oss.qualcomm.com>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Sebastian Reichel <sre@kernel.org>
Link: https://lore.kernel.org/r/20250305-leds-qcom-lpg-fix-max-pwm-on-hi-res-v4-1-bfe124a53a9f@linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>
leds-st1202 requires the LED Pattern Trigger (LEDS_TRIGGER_PATTERN), which
is not selected when LED Trigger support is (LEDS_TRIGGERS).
To reproduce this:
- make menuconfig KCONFIG_CONFIG=
- select LEDS_ST1202 dependencies OF, I2C and LEDS_CLASS.
- select LEDS_ST1202
- LEDS_TRIGGERS is selected but LEDS_TRIGGER_PATTERN isn't.
The absence of LEDS_TRIGGER_PATTERN explicitly required can lead to builds
in which LEDS_ST1202 is selected while LEDS_TRIGGER_PATTERN isn't. The direct
result of that would be that /sys/class/leds/<led>/hw_pattern wouldn't be
available and there would be no way of interacting with the driver and
hardware from user space.
Add select LEDS_TRIGGER_PATTERN to Kconfig to meet the requirement and
indirectly document it as well.
Signed-off-by: Manuel Fombuena <fombuena@outlook.com>
Link: https://lore.kernel.org/r/CWLP123MB5473F4DF3A668F7DD057A280C5C22@CWLP123MB5473.GBRP123.PROD.OUTLOOK.COM
Signed-off-by: Lee Jones <lee@kernel.org>
Minor edits regarding use of spacing and proofreading.
There is a minor inconsistency in the use of spacing as margin in
one of the comments providing details about the datasheet.
There is also a typo that comes from the datasheet itself.
Change spacing on comment and correct typo.
Signed-off-by: Manuel Fombuena <fombuena@outlook.com>
Link: https://lore.kernel.org/r/CWLP123MB547333EFFFBFFA840225BC02C5C22@CWLP123MB5473.GBRP123.PROD.OUTLOOK.COM
Signed-off-by: Lee Jones <lee@kernel.org>
Arguably, there are more chances of errors occurring during the
initialization of the hardware, so this should complete successfully
before the devicetree node's children are initialized.
st1202_dt_init() fills the led_classdev struct.
st1202_setup() initializes the hardware. Specifically, resets the chip,
enables its phase-shift delay feature, enables the device and disables all
the LEDs channels. All that writing to registers, with no input from
st1202_dt_init().
Real-world testing corroborates that calling st1202_setup() before
st1202_dt_init() doesn't cause any issue during initialization.
Switch the order of st1202_dt_init() and st1202_setup() to ensure the
hardware is correctly initialized before the led_classdev struct is
filled.
Signed-off-by: Manuel Fombuena <fombuena@outlook.com>
Link: https://lore.kernel.org/r/CWLP123MB54731877A8DC54EDD33F0229C5C22@CWLP123MB5473.GBRP123.PROD.OUTLOOK.COM
Signed-off-by: Lee Jones <lee@kernel.org>
st1202_dt_init() calls devm_led_classdev_register_ext() before the
internal data structures are properly set up, so the LEDs become visible
to user space while being partially initialized, leading to a window
where trying to access them causes a NULL pointer access.
Move devm_led_classdev_register_ext() from DT initialization
to the end of the probe function when DT and hardware are fully
initialized and ready to interact with user space.
Fixes: 259230378c65 ("leds: Add LED1202 I2C driver")
Signed-off-by: Manuel Fombuena <fombuena@outlook.com>
Link: https://lore.kernel.org/r/CWLP123MB54732771AC0CE5491B3C84DCC5C32@CWLP123MB5473.GBRP123.PROD.OUTLOOK.COM
Signed-off-by: Lee Jones <lee@kernel.org>
Currently, driver only allows for PWM modules to use 9-bit resolution.
However, PWM modules can support 6-bit and 9-bit resolution. Add support
for 6-bit resolution.
Suggested-by: Zejiong Huang <zejiongh@qti.qualcomm.com>
Signed-off-by: Anjelique Melendez <anjelique.melendez@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250213003533.1684131-1-anjelique.melendez@oss.qualcomm.com
Signed-off-by: Lee Jones <lee@kernel.org>
While commit fa15d8c69238 ("leds: Fix set_brightness_delayed() race")
successfully forces led_set_brightness() to be called with LED_OFF at
least once when switching from blinking to LED on state so that
hw-blinking can be disabled, another race remains. Indeed in
led_set_brightness(LED_OFF) followed by led_set_brightness(any)
scenario the following CPU scheduling can happen:
CPU0 CPU1
---- ----
set_brightness_delayed() {
test_and_clear_bit(BRIGHTNESS_OFF)
led_set_brightness(LED_OFF) {
set_bit(BRIGHTNESS_OFF)
queue_work()
}
led_set_brightness(any) {
set_bit(BRIGHTNESS)
queue_work() //already queued
}
test_and_clear_bit(BRIGHTNESS)
/* LED set with brightness any */
}
/* From previous CPU1 queue_work() */
set_brightness_delayed() {
test_and_clear_bit(BRIGHTNESS_OFF)
/* LED turned off */
test_and_clear_bit(BRIGHTNESS)
/* Clear from previous run, LED remains off */
In that case the led_set_brightness(LED_OFF)/led_set_brightness(any)
sequence will be effectively executed in reverse order and LED will
remain off.
With the introduction of commit 32360bf6a5d4 ("leds: Introduce ordered
workqueue for LEDs events instead of system_wq") the race is easier to
trigger as sysfs brightness configuration does not wait for
set_brightness_delayed() work to finish (flush_work() removal).
Use delayed_set_value to optionnally re-configure brightness after a
LED_OFF. That way a LED state could be configured more that once but
final state will always be as expected. Ensure that delayed_set_value
modification is seen before set_bit() using smp_mb__before_atomic().
Fixes: fa15d8c69238 ("leds: Fix set_brightness_delayed() race")
Signed-off-by: Remi Pommarel <repk@triplefau.lt>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/19c81177059dab7b656c42063958011a8e4d1a66.1740050412.git.repk@triplefau.lt
Signed-off-by: Lee Jones <lee@kernel.org>
This reverts commit 38bcb51f81af17a6d40fc135e565fc1fb8aa8e9d.
This function is needed by the hardware blink support just introduced.
Also rename the function to pca955x_num_led_regs() to match the rest of
the functions in the driver.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Link: https://lore.kernel.org/r/20250221155144.2109806-1-eajames@linux.ibm.com
Signed-off-by: Lee Jones <lee@kernel.org>
st1202_led_set function now uses the !! operator to convert the
enum led_brightness() value to a boolean active state, which is then
passed to the st1202_channel_set() function. This change maintains the
existing functionality.
cocci warnings:
drivers/leds/leds-st1202.c:194:66-71: WARNING: conversion to bool not needed here.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202502181845.xESVrC61-lkp@intel.com/
Signed-off-by: Pei Xiao <xiaopei01@kylinos.cn>
Link: https://lore.kernel.org/r/tencent_3DF7518D407679C99C4CCCB1B8E64638700A@qq.com
Signed-off-by: Lee Jones <lee@kernel.org>
Support blinking using the PCA955x chip. Use PWM0 for blinking
instead of LED_HALF brightness. Since there is only one frequency
and brightness register for any blinking LED, track the blink state
of each LED and only support one HW blinking frequency. If another
frequency is requested, fallback to software blinking. In addition,
blinked LEDs can only use full brightness in order to maintain 50%
duty cycle, which is required for the specified blink rate.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20250212143038.1416501-5-eajames@linux.ibm.com
Signed-off-by: Lee Jones <lee@kernel.org>
Previously, the probe function might do up to 32 reads and writes
to the same 4 registers to program the LED selection. Reduce this to
a maximum of 5 operations by accumulating the changes to the LED
selection and comparing with the previous value to write the
selection if different.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20250212143038.1416501-4-eajames@linux.ibm.com
Signed-off-by: Lee Jones <lee@kernel.org>
As a minor clean up item, pass the driver data pointer instead of the
I2C client to the reader and writer helper functions. Now the PCA
driver data doesn't have to be looked up again in the I2C client data
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20250212143038.1416501-3-eajames@linux.ibm.com
Signed-off-by: Lee Jones <lee@kernel.org>
Add helper functions to clean up the code, and rename a few
oddly named functions and variables.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20250212143038.1416501-2-eajames@linux.ibm.com
Signed-off-by: Lee Jones <lee@kernel.org>
hrtimer_setup() takes the callback function pointer as argument and
initializes the timer completely.
Replace hrtimer_init() and the open coded initialization of
hrtimer::function with the new setup mechanism.
Patch was created by using Coccinelle.
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Zack Rusin <zack.rusin@broadcom.com>
Link: https://lore.kernel.org/all/76fa1cc9777a99a48f49f949abadc1c10af1bc64.1738746904.git.namcao@linutronix.de
Even if it's not critical, the avoidance of checking the error code
from devm_mutex_init() call today diminishes the point of using devm
variant of it. Tomorrow it may even leak something. Add the missed
check.
Fixes: 259230378c65 ("leds: Add LED1202 I2C driver")
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20250204-must_check-devm_mutex_init-v2-1-7b6271c4b7e6@weissschuh.net
Signed-off-by: Lee Jones <lee@kernel.org>
REGCACHE_NONE is the default type of the cache when not provided.
Drop unneeded explicit assignment to it.
Note, it's defined to 0, and if ever be redefined, it will break
literally a lot of the drivers, so it very unlikely to happen.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20250129152659.1801420-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Lee Jones <lee@kernel.org>
In case a PHY LED implements .blink_set callback to set LED blink
interval, call it even if .hw_control is already set, as that LED
blink interval likely controls the blink rate of that HW offloaded
LED. For PHY LEDs, that can be their activity blinking interval.
The software blinking is not affected by this change.
With this change, the LED interval setting looks something like this:
$ echo netdev > /sys/class/leds/led:green:lan/trigger
$ echo 1 > /sys/class/leds/led:green:lan/brightness
$ echo 250 > /sys/class/leds/led:green:lan/interval
Signed-off-by: Marek Vasut <marex@denx.de>
Link: https://lore.kernel.org/r/20250120113740.91807-1-marex@denx.de
Signed-off-by: Lee Jones <lee@kernel.org>
Here is the big set of driver core and debugfs updates for 6.14-rc1.
It's coming late in the merge cycle as there are a number of merge
conflicts with your tree now, and I wanted to make sure they were
working properly. To resolve them, look in linux-next, and I will send
the "fixup" patch as a response to the pull request.
Included in here is a bunch of driver core, PCI, OF, and platform rust
bindings (all acked by the different subsystem maintainers), hence the
merge conflict with the rust tree, and some driver core api updates to
mark things as const, which will also require some fixups due to new
stuff coming in through other trees in this merge window.
There are also a bunch of debugfs updates from Al, and there is at least
one user that does have a regression with these, but Al is working on
tracking down the fix for it. In my use (and everyone else's linux-next
use), it does not seem like a big issue at the moment.
Here's a short list of the things in here:
- driver core bindings for PCI, platform, OF, and some i/o functions.
We are almost at the "write a real driver in rust" stage now,
depending on what you want to do.
- misc device rust bindings and a sample driver to show how to use
them
- debugfs cleanups in the fs as well as the users of the fs api for
places where drivers got it wrong or were unnecessarily doing things
in complex ways.
- driver core const work, making more of the api take const * for
different parameters to make the rust bindings easier overall.
- other small fixes and updates
All of these have been in linux-next with all of the aforementioned
merge conflicts, and the one debugfs issue, which looks to be resolved
"soon".
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZ5koPA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymFHACfT5acDKf2Bov2Lc/5u3vBW/R6ChsAnj+LmgVI
hcDSPodj4szR40RRnzBd
=u5Ey
-----END PGP SIGNATURE-----
Merge tag 'driver-core-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core and debugfs updates from Greg KH:
"Here is the big set of driver core and debugfs updates for 6.14-rc1.
Included in here is a bunch of driver core, PCI, OF, and platform rust
bindings (all acked by the different subsystem maintainers), hence the
merge conflict with the rust tree, and some driver core api updates to
mark things as const, which will also require some fixups due to new
stuff coming in through other trees in this merge window.
There are also a bunch of debugfs updates from Al, and there is at
least one user that does have a regression with these, but Al is
working on tracking down the fix for it. In my use (and everyone
else's linux-next use), it does not seem like a big issue at the
moment.
Here's a short list of the things in here:
- driver core rust bindings for PCI, platform, OF, and some i/o
functions.
We are almost at the "write a real driver in rust" stage now,
depending on what you want to do.
- misc device rust bindings and a sample driver to show how to use
them
- debugfs cleanups in the fs as well as the users of the fs api for
places where drivers got it wrong or were unnecessarily doing
things in complex ways.
- driver core const work, making more of the api take const * for
different parameters to make the rust bindings easier overall.
- other small fixes and updates
All of these have been in linux-next with all of the aforementioned
merge conflicts, and the one debugfs issue, which looks to be resolved
"soon""
* tag 'driver-core-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (95 commits)
rust: device: Use as_char_ptr() to avoid explicit cast
rust: device: Replace CString with CStr in property_present()
devcoredump: Constify 'struct bin_attribute'
devcoredump: Define 'struct bin_attribute' through macro
rust: device: Add property_present()
saner replacement for debugfs_rename()
orangefs-debugfs: don't mess with ->d_name
octeontx2: don't mess with ->d_parent or ->d_parent->d_name
arm_scmi: don't mess with ->d_parent->d_name
slub: don't mess with ->d_name
sof-client-ipc-flood-test: don't mess with ->d_name
qat: don't mess with ->d_name
xhci: don't mess with ->d_iname
mtu3: don't mess wiht ->d_iname
greybus/camera - stop messing with ->d_iname
mediatek: stop messing with ->d_iname
netdevsim: don't embed file_operations into your structs
b43legacy: make use of debugfs_get_aux()
b43: stop embedding struct file_operations into their objects
carl9170: stop embedding file_operations into their objects
...
- Fix a memory leak in the cht-wcove driver by using devm_led_classdev_register().
- Fix an OF node reference leak in the netxbig driver.
- Ensure PWM is disabled properly in pwm-multicolor suspend.
- Add support for Texas Instruments LP8864, LP8864S, LP8866 LED-backlight drivers.
- Add support for STMicroelectronics's LED1202 12-channel LED driver.
- Convert LP8860 bindings to YAML format.
- Add bindings for the TI LP8864/LP8866 LED drivers.
- Add LED1202 LED controller bindings.
- Fix path to color definitions in leds-class-multicolor.yaml.
- Add pm660l compatible to qcom,spmi-flash-led bindings.
- Extend cznic,turris-omnia-leds binding with interrupts property.
- Add documentation for the STMicroelectronics LED1202 driver.
- Add entry for AAEON UP board FPGA drivers in MAINTAINERS.
- Fix a wrong format specifier in the ledtrig-activity driver.
- Fix a bug in the lp8860 driver where only half of the EEPROM was written.
-----BEGIN PGP SIGNATURE-----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=7V05
-----END PGP SIGNATURE-----
Merge tag 'leds-next-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds
Pull LED updates from Lee Jones:
- Allow struct bin_attribute instances to be placed in read-only memory
for enhanced protection
- Fix a memory leak in the cht-wcove driver by using
devm_led_classdev_register()
- Fix an OF node reference leak in the netxbig driver
- Ensure PWM is disabled properly in pwm-multicolor suspend
- Add support for Texas Instruments LP8864, LP8864S, LP8866
LED-backlight drivers
- Add support for STMicroelectronics's LED1202 12-channel LED driver
- Convert LP8860 bindings to YAML format
- Add bindings for the TI LP8864/LP8866 LED drivers
- Add LED1202 LED controller bindings
- Fix path to color definitions in leds-class-multicolor.yaml
- Add pm660l compatible to qcom,spmi-flash-led bindings
- Extend cznic,turris-omnia-leds binding with interrupts property
- Add documentation for the STMicroelectronics LED1202 driver
- Add entry for AAEON UP board FPGA drivers in MAINTAINERS
- Fix a wrong format specifier in the ledtrig-activity driver
- Fix a bug in the lp8860 driver where only half of the EEPROM was
written
* tag 'leds-next-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds: (28 commits)
leds: triggers: Constify 'struct bin_attribute'
leds: cht-wcove: Use devm_led_classdev_register() to avoid memory leak
leds: lp8864: Add support for Texas Instruments LP8864, LP8864S, LP8866 LED-backlights
dt-bindings: leds: Convert LP8860 into YAML format
leds: Add LED1202 I2C driver
dt-bindings: leds: Add LED1202 LED Controller
Documentation:leds: Add leds-st1202.rst
leds: pwm-multicolor: Disable PWM when going to suspend
leds: netxbig: Fix an OF node reference leak in netxbig_leds_get_of_pdata()
turris-omnia-mcu-interface.h: Move macro definitions outside of enums
MAINTAINERS: Add entry for AAEON UP board FPGA drivers
leds: Add AAEON UP board LED driver
leds: trigger: netdev: Check offload ability on interface up
leds: turris-omnia: Use uppercase first letter in all comments
leds: turris-omnia: Use dev_err_probe() where appropriate
leds: turris-omnia: Inform about missing LED gamma correction feature in the MCU driver
platform: cznic: turris-omnia-mcu: Inform about missing LED panel brightness change interrupt feature
leds: turris-omnia: Notify sysfs on MCU global LEDs brightness change
leds: turris-omnia: Document driver private structures
dt-bindings: leds: cznic,turris-omnia-leds: Allow interrupts property
...
- Remove unused platform driver support for syscon.
- Allow syscon nodes to be registered without a "syscon" compatible string.
- Make `platform_data` pointer const in struct mfd_cell.
- Revert support for multiple AXP PMICs to avoid regressions.
- Increase SoundWire attach timeout and use gpiod_set_raw() for GPIO operation.
- Store the result from fault_log() for use by other sub-components.
- Fix an invalid regmap-config max_register value.
- Add another Gemini Lake ISA bridge PCI device ID.
- Use devm_register_power_off_handler() to simplify code.
- Add support for QNAP microcontroller units, including LEDs, input, and hwmon.
- Use MFD_CELL macros and remove unused code.
- Add support for AAEON UP board FPGA.
- Remove unused includes.
- Fix various typos and compatibility issues in multiple bindings.
- Add new bindings for rk3562 QoS, LED1202, and qcom,tcsr-ipq5424.
- Convert several bindings to YAML schema.
- Update sprd,sc2731 bindings to reference sprd,sc2731-efuse bindings directly.
- Fix rohm,bd71815 bindings by correcting resistor values and typos.
- Documentation improvements:
- Add documentation for LED1202 and qnap-mcu-hwmon.
- Adjust the file entry for the qnap-mcu header in MAINTAINERS.
-----BEGIN PGP SIGNATURE-----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=3HQm
-----END PGP SIGNATURE-----
Merge tag 'mfd-next-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull mfd updates from Lee Jones:
- Fix race in device_node_get_regmap() using more extensive locking
- Remove unused platform driver support for syscon
- Allow syscon nodes to be registered without a "syscon" compatible
string
- Make `platform_data` pointer const in struct mfd_cell
- Revert support for multiple AXP PMICs to avoid regressions
- Increase SoundWire attach timeout and use gpiod_set_raw() for GPIO
operation
- Store the result from fault_log() for use by other sub-components
- Fix an invalid regmap-config max_register value
- Add another Gemini Lake ISA bridge PCI device ID
- Use devm_register_power_off_handler() to simplify code
- Add support for QNAP microcontroller units, including LEDs, input,
and hwmon
- Use MFD_CELL macros and remove unused code
- Add support for AAEON UP board FPGA
- Remove unused includes
- Fix various typos and compatibility issues in multiple bindings
- Add new bindings for rk3562 QoS, LED1202, and qcom,tcsr-ipq5424
- Convert several bindings to YAML schema
- Update sprd,sc2731 bindings to reference sprd,sc2731-efuse bindings
directly
- Fix rohm,bd71815 bindings by correcting resistor values and typos
- Documentation improvements:
- Add documentation for LED1202 and qnap-mcu-hwmon
- Adjust the file entry for the qnap-mcu header in MAINTAINERS
* tag 'mfd-next-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (35 commits)
MAINTAINERS: Adjust the file entry for the qnap-mcu header
dt-bindings: mfd: syscon: Fix ti,j784s4-acspcie-proxy-ctrl compatible
dt-bindings: mfd: syscon: Fix al,alpine-sysfabric-service compatible
Revert "mfd: axp20x: Allow multiple regulators"
dt-bindings: mfd: syscon: Add rk3562 QoS register compatible
mfd: syscon: Allow syscon nodes without a "syscon" compatible
mfd: syscon: Remove the platform driver support
mfd: syscon: Fix race in device_node_get_regmap()
dt-bindings: mfd: atmel: Convert to YAML schema
dt-bindings: mfd: atmel,at91sam9260: Convert to YAML schema
dt-bindings: mfd: sprd,sc2731: Reference sprd,sc2731-efuse bindings
mfd: tps65219: Remove unused macros & add regmap.h
mfd: tps65219: Use MFD_CELL macros
leds: Add LED1202 I2C driver
dt-bindings: leds: Add LED1202 LED Controller
Documentation:leds: Add leds-st1202.rst
mfd: Add support for AAEON UP board FPGA
mfd: da9052: Store result from fault_log
mfd: intel_soc_pmic_chtdc_ti: Fix invalid regmap-config max_register value
mfd: cs42l43: Use devres for remove as well
...
The sysfs core now allows instances of 'struct bin_attribute' to be
moved into read-only memory. Make use of that to protect them against
accidental or malicious modifications.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20241222-sysfs-const-bin_attr-led-v1-1-ecc5212a31fa@weissschuh.net
Signed-off-by: Lee Jones <lee@kernel.org>
cht_wc_leds_probe() leaks memory when the second led_classdev_register()
call in the for-loop fails as it does not call the cleanup function
led_classdev_unregister() on the first device. Avoid this leak by
calling devm_led_classdev_register().
Fixes: 047da762b9a9 ("leds: Add Intel Cherry Trail Whiskey Cove PMIC LED driver")
Signed-off-by: Joe Hattori <joe@pf.is.s.u-tokyo.ac.jp>
Link: https://lore.kernel.org/r/20241220085346.533675-1-joe@pf.is.s.u-tokyo.ac.jp
Signed-off-by: Lee Jones <lee@kernel.org>
The output current can be adjusted separately for each channel by 8-bit
analog (current sink input) and 12-bit digital (PWM) dimming control. The
LED1202 implements 12 low-side current generators with independent dimming
control.
Internal volatile memory allows the user to store up to 8 different patterns,
each pattern is a particular output configuration in terms of PWM
duty-cycle (on 4096 steps). Analog dimming (on 256 steps) is per channel but
common to all patterns. Each device tree LED node will have a corresponding
entry in /sys/class/leds with the label name. The brightness property
corresponds to the per channel analog dimming, while the patterns[1-8] to the
PWM dimming control.
Signed-off-by: Vicentiu Galanopulo <vicentiu.galanopulo@remote-tech.co.uk>
Link: https://lore.kernel.org/r/20241218183401.41687-4-vicentiu.galanopulo@remote-tech.co.uk
Signed-off-by: Lee Jones <lee@kernel.org>
The output current can be adjusted separately for each channel by 8-bit
analog (current sink input) and 12-bit digital (PWM) dimming control. The
LED1202 implements 12 low-side current generators with independent dimming
control.
Internal volatile memory allows the user to store up to 8 different patterns,
each pattern is a particular output configuration in terms of PWM
duty-cycle (on 4096 steps). Analog dimming (on 256 steps) is per channel but
common to all patterns. Each device tree LED node will have a corresponding
entry in /sys/class/leds with the label name. The brightness property
corresponds to the per channel analog dimming, while the patterns[1-8] to the
PWM dimming control.
Signed-off-by: Vicentiu Galanopulo <vicentiu.galanopulo@remote-tech.co.uk>
Link: https://lore.kernel.org/r/20241218182001.41476-4-vicentiu.galanopulo@remote-tech.co.uk
Signed-off-by: Lee Jones <lee@kernel.org>
netxbig_leds_get_of_pdata() does not release the OF node obtained by
of_parse_phandle() when of_find_device_by_node() fails. Add an
of_node_put() call to fix the leak.
This bug was found by an experimental static analysis tool that I am
developing.
Fixes: 9af512e81964 ("leds: netxbig: Convert to use GPIO descriptors")
Signed-off-by: Joe Hattori <joe@pf.is.s.u-tokyo.ac.jp>
Link: https://lore.kernel.org/r/20241216074923.628509-1-joe@pf.is.s.u-tokyo.ac.jp
Signed-off-by: Lee Jones <lee@kernel.org>
Add support for LEDs on AAEON UP boards. These leds are managed by the
onboard FPGA:
- UP boards: yellow, green, red
- UP Squared boards: blue, yellow, green, red
Based on the work done by Gary Wang <garywang@aaeon.com.tw>, largely
rewritten.
Signed-off-by: Thomas Richard <thomas.richard@bootlin.com>
Link: https://lore.kernel.org/r/20241211-aaeon-up-board-pinctrl-support-v1-2-24719be27631@bootlin.com
Signed-off-by: Lee Jones <lee@kernel.org>
This adds a driver that connects to the qnap-mcu mfd driver and provides
access to the LEDs on it.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20241107114712.538976-6-heiko@sntech.de
Signed-off-by: Lee Jones <lee@kernel.org>
The trigger_data->hw_control indicates whether the LED is controlled by HW
offload, i.e. the PHY. The trigger_data->hw_control = can_hw_control() is
currently called only from netdev_led_attr_store(), i.e. when writing any
sysfs attribute of the netdev trigger instance associated with a PHY LED.
The can_hw_control() calls validate_net_dev() which internally calls
led_cdev->hw_control_get_device(), which is phy_led_hw_control_get_device()
for PHY LEDs. The phy_led_hw_control_get_device() returns NULL if the PHY
is not attached.
At least in case of DWMAC (STM32MP, iMX8M, ...), the PHY device is attached
only when the interface is brought up and is detached again when the
interface is brought down. In case e.g. udev rules configure the netdev
LED trigger sysfs attributes before the interface is brought up, then when
the interface is brought up, the LEDs are not blinking.
This is because trigger_data->hw_control = can_hw_control() was called
when udev wrote the sysfs attribute files, before the interface was up,
so can_hw_control() resp. validate_net_dev() returned false, and the
trigger_data->hw_control = can_hw_control() was never called again to
update the trigger_data->hw_control content and let the offload take
over the LED blinking.
Call data->hw_control = can_hw_control() from netdev_trig_notify() to
update the offload capability of the LED when the UP notification arrives.
This makes the LEDs blink after the interface is brought up.
On STM32MP13xx with RTL8211F, it is enough to have the following udev rule
in place, boot the machine with cable plugged in, and the LEDs won't work
without this patch once the interface is brought up, even if they should:
"
ACTION=="add", SUBSYSTEM=="leds", KERNEL=="stmmac-0:01:green:wan", ATTR{trigger}="netdev", ATTR{link_10}="1", ATTR{link_100}="1", ATTR{link_1000}="1", ATTR{device_name}="end0"
ACTION=="add", SUBSYSTEM=="leds", KERNEL=="stmmac-0:01:yellow:wan", ATTR{trigger}="netdev", ATTR{rx}="1", ATTR{tx}="1", ATTR{device_name}="end0"
"
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20241216104826.6946-1-marex@denx.de
Signed-off-by: Lee Jones <lee@kernel.org>
If the LED gamma correction feature is missing in the MCU firmware,
inform about this in the MCU firmware probe function instead of LED
driver probe function, so that all the feature checks are in one place.
Signed-off-by: Marek Behún <kabel@kernel.org>
Link: https://lore.kernel.org/r/20241111100355.6978-10-kabel@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
Recall that on Turris Omnia, the LED controller has a global brightness
property, which allows the user to make the front LED panel dimmer.
There is also a button on the front panel, which by default is
configured so that pressing it changes the global brightness to a lower
value (unless it is at 0%, in which case pressing the button changes the
global brightness to 100%).
Newer versions of the MCU firmware support informing the SOC that the
brightness was changed by button press event via an interrupt.
Now that we have the turris-omnia-mcu driver, which adds support for MCU
interrupts, add the ability to inform the userspace (via a sysfs
notification) that the global brightness was changed.
Signed-off-by: Marek Behún <kabel@kernel.org>
Link: https://lore.kernel.org/r/20241111100355.6978-8-kabel@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
The global turris-omnia-mcu-interface.h header file contains the
definitions for MCU commands. Drop the driver-internal definitions and
use the global ones.
Signed-off-by: Marek Behún <kabel@kernel.org>
Link: https://lore.kernel.org/r/20241111100355.6978-5-kabel@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
