soc: devicetree changes for 6.14

We see the addition of eleven new SoCs, including a total of sixx arm64
 chips from Qualcomm alone. Overall, the Qualcomm platforms once again
 make up the majority of all changes, after a couple of quieter releases.
 
 The new SoCs in this branch are:
 
  - Microchip sama7d65 is a new 32-bit embedded chip with a single
    Cortex-A7 and the current high end of the old Atmel SoC line.
 
  - Samsung Exynos 9810 is a mobile phone chip used in some older
    phones like the Samsung Galaxy S9
 
  - Renesas R-Car V4H ES3.0 (R8A779G3) is an updated version of
    the V4H (R8A779G0) low-power automotive SoC
 
  - Renesas RZ/G3E (R0A09G047) is a family of embedded chips
    using Cortex-A55 cores
 
  - Qualcomm Snapdragon 8 Elite (SM8750) is a new phone chip based on
    Qualcomm's Oryon CPU cores.
 
  - Qualcomm Snapdragon AR2 (SAR2130P) is a SoC for augmented reality
    glasses.
 
  - Qualcomm IQ6 (QCS610) and IQ8 (QCS8300) are two industrial
    IOT platforms.
 
  - Snapdragon 425 (MSM8917) is a mobile phone SoC from 2016
 
  - Qualcomm IPQ5424 is a Wi-Fi 7 networking chip
 
 All of the above are part of already supported SoC families that
 only need new devicetree files. Two additional SoCs in new
 families are part of a separate branch.
 
 There are 48 new machines in total, including six arm32 ones based
 on aspeed. broadcom, microchip and st SoCs all using Cortex-A7 cores,
 and a single risc-v board, the Banana Pi R3.
 
 The remaining ones use arm64 chips from Broadcom, Samsung, NXP, Mediatek,
 Qualcomm, Renesas and Rockchips and cover development boards, phones,
 laptops, industrial machines routers.
 
 A lot of ongoing work is for cleaning up build time warnings and other
 issues, in addition to the new machines and added features.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmeSdLQACgkQYKtH/8kJ
 UicovRAA0fABVQ8Fl45/NNaBGfXYagXptCSTGOFsdKJ49LVF4uLfWtL+0ENx5Ck5
 PJjr0n9kMNWqeJDiaaQtW21HhYxGxcz3MJEj60/C+D0QNQExPVROUHNy1aggxjNI
 qHf0DnTLAWzjtD0YdCmiI6JCDRdPIRQi2IJymAu7tlooc809PG15bbo6PpIYginC
 1U6cYtuyBuE/9ku2FgWX6E4T0aRjPyaR8thg9VAIsKsugdH3v9EdtLC/MUqOBHMt
 30PyghR9+r1LxQzOC/q7TFcPmnUb74fSPW85X7a5KXv53K6MeRXtRhnetts08R7Z
 iZCJi2ORO100RX7plAzxtF+CWI8eO3bVzibTcZmgxP/Is6CmrlnTcPzOFvqfyx1E
 AfeyEGA7XofjFwPJcc9bCQc3r2w90FpsKqtlaBAn2Od+1EUuuAAgUcjrNyNJqlkp
 8Vos0FxNOOnYULjndYZqa6MslBuxNXYtNj0Ph1/fpzUWKwo+x8LWy8Xb9a5Sdz0H
 OsPVWbumrXlG1rcNMFu8yPzKOBgO0t8on5MRwW+1Xmf1lcQNzJWeGqTzsFPObREV
 Ar7evGEgSb8qladOtzbg645wIezWIXpSJUICQhilxV8DUO+IYuMz668QoZZP40V5
 uHdWxFGdNe1cm5JAsjjwCeFNk/Pbro1+ojc4E6//MRp+WCgdPQ0=
 =vdmR
 -----END PGP SIGNATURE-----

Merge tag 'soc-dt-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull SoC devicetree updates from Arnd Bergmann:
 "We see the addition of eleven new SoCs, including a total of sixx
  arm64 chips from Qualcomm alone. Overall, the Qualcomm platforms once
  again make up the majority of all changes, after a couple of quieter
  releases.

  The new SoCs in this branch are:

   - Microchip sama7d65 is a new 32-bit embedded chip with a single
     Cortex-A7 and the current high end of the old Atmel SoC line.

   - Samsung Exynos 9810 is a mobile phone chip used in some older
     phones like the Samsung Galaxy S9

   - Renesas R-Car V4H ES3.0 (R8A779G3) is an updated version of the V4H
     (R8A779G0) low-power automotive SoC

   - Renesas RZ/G3E (R0A09G047) is a family of embedded chips using
     Cortex-A55 cores

   - Qualcomm Snapdragon 8 Elite (SM8750) is a new phone chip based on
     Qualcomm's Oryon CPU cores.

   - Qualcomm Snapdragon AR2 (SAR2130P) is a SoC for augmented reality
     glasses.

   - Qualcomm IQ6 (QCS610) and IQ8 (QCS8300) are two industrial IOT
     platforms.

   - Snapdragon 425 (MSM8917) is a mobile phone SoC from 2016

   - Qualcomm IPQ5424 is a Wi-Fi 7 networking chip

  All of the above are part of already supported SoC families that only
  need new devicetree files. Two additional SoCs in new families are
  part of a separate branch.

  There are 48 new machines in total, including six arm32 ones based on
  aspeed. broadcom, microchip and st SoCs all using Cortex-A7 cores, and
  a single risc-v board, the Banana Pi R3.

  The remaining ones use arm64 chips from Broadcom, Samsung, NXP,
  Mediatek, Qualcomm, Renesas and Rockchips and cover development
  boards, phones, laptops, industrial machines routers.

 A lot of ongoing work is for cleaning up build time warnings and other
 issues, in addition to the new machines and added features"

* tag 'soc-dt-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (619 commits)
  arm64: tegra: Fix Tegra234 PCIe interrupt-map
  arm64: dts: qcom: x1e80100-romulus: Update firmware nodes
  arm64: dts: rockchip: add DTs for Firefly ITX-3588J and its Core-3588J SoM
  dt-bindings: arm: rockchip: Add Firefly ITX-3588J board
  arm64: dts: rockchip: Add Orange Pi 5 Max board
  dt-bindings: arm: rockchip: Add Xunlong Orange Pi 5 Max
  arm64: dts: rockchip: refactor common rk3588-orangepi-5.dtsi
  arm64: dts: rockchip: add WLAN to rk3588-evb1 controller
  arm64: dts: rockchip: increase gmac rx_delay on rk3399-puma
  arm64: dts: rockchip: Delete redundant RK3328 GMAC stability fixes
  arm64: tegra: Disable Tegra234 sce-fabric node
  arm64: tegra: Fix typo in Tegra234 dce-fabric compatible
  arm64: tegra: Fix DMA ID for SPI2
  arm64: dts: qcom: msm8916-samsung-serranove: Add display panel
  arm64: dts: qcom: sm8650: Add 'global' interrupt to the PCIe RC nodes
  arm64: dts: qcom: sm8550: Add 'global' interrupt to the PCIe RC nodes
  arm64: dts: qcom: Remove unused and undocumented properties
  arm64: dts: qcom: sdm450-lenovo-tbx605f: add DSI panel nodes
  arm64: dts: qcom: pmi8950: add LAB-IBB nodes
  arm64: dts: qcom: ipq5424: enable the download mode support
  ...
This commit is contained in:
Linus Torvalds 2025-01-24 14:48:03 -08:00
commit f102039270
441 changed files with 61361 additions and 3205 deletions

View File

@ -74,6 +74,7 @@ properties:
- description: AST2600 based boards
items:
- enum:
- ampere,mtjefferson-bmc
- ampere,mtmitchell-bmc
- aspeed,ast2600-evb
- aspeed,ast2600-evb-a1
@ -91,6 +92,7 @@ properties:
- ibm,everest-bmc
- ibm,fuji-bmc
- ibm,rainier-bmc
- ibm,sbp1-bmc
- ibm,system1-bmc
- ibm,tacoma-bmc
- inventec,starscream-bmc

View File

@ -180,6 +180,13 @@ properties:
- const: atmel,sama5d4
- const: atmel,sama5
- description: Microchip SAMA7D65 Curiosity Board
items:
- const: microchip,sama7d65-curiosity
- const: microchip,sama7d65
- const: microchip,sama7d6
- const: microchip,sama7
- items:
- const: microchip,sama7g5ek # SAMA7G5 Evaluation Kit
- const: microchip,sama7g5

View File

@ -13,6 +13,7 @@ PIT Timer required properties:
PIT64B Timer required properties:
- compatible: Should be "microchip,sam9x60-pit64b" or
"microchip,sam9x7-pit64b", "microchip,sam9x60-pit64b"
"microchip,sama7d65-pit64b", "microchip,sam9x60-pit64b"
- reg: Should contain registers location and length
- interrupts: Should contain interrupt for PIT64B timer
- clocks: Should contain the available clock sources for PIT64B timer.
@ -27,12 +28,13 @@ Its subnodes can be:
- watchdog: compatible should be "atmel,at91rm9200-wdt"
RAMC SDRAM/DDR Controller required properties:
- compatible: Should be "atmel,at91rm9200-sdramc", "syscon"
"atmel,at91sam9260-sdramc",
"atmel,at91sam9g45-ddramc",
"atmel,sama5d3-ddramc",
"microchip,sam9x60-ddramc",
"microchip,sama7g5-uddrc",
- compatible: Should be "atmel,at91rm9200-sdramc", "syscon" or
"atmel,at91sam9260-sdramc" or
"atmel,at91sam9g45-ddramc" or
"atmel,sama5d3-ddramc" or
"microchip,sam9x60-ddramc" or
"microchip,sama7g5-uddrc" or
"microchip,sama7d65-uddrc", "microchip,sama7g5-uddrc" or
"microchip,sam9x7-ddramc", "atmel,sama5d3-ddramc".
- reg: Should contain registers location and length

View File

@ -34,6 +34,7 @@ properties:
- enum:
- netgear,r8000p
- tplink,archer-c2300-v1
- zyxel,ex3510b
- const: brcm,bcm4906
- const: brcm,bcm4908
- const: brcm,bcmbca
@ -115,6 +116,7 @@ properties:
items:
- enum:
- brcm,bcm96846
- genexis,xg6846b
- const: brcm,bcm6846
- const: brcm,bcmbca

View File

@ -1106,6 +1106,15 @@ properties:
- ysoft,imx8mp-iota2-lumpy # Y Soft i.MX8MP IOTA2 Lumpy Board
- const: fsl,imx8mp
- description: ABB Boards with i.MX8M Plus Modules from ADLink
items:
- enum:
- abb,imx8mp-aristanetos3-adpismarc # i.MX8MP ABB SoM on PI SMARC Board
- abb,imx8mp-aristanetos3-helios # i.MX8MP ABB SoM on helios Board
- abb,imx8mp-aristanetos3-proton2s # i.MX8MP ABB SoM on proton2s Board
- const: abb,imx8mp-aristanetos3-som # i.MX8MP ABB SoM
- const: fsl,imx8mp
- description: Avnet (MSC Branded) Boards with SM2S i.MX8M Plus Modules
items:
- const: avnet,sm2s-imx8mp-14N0600E-ep1 # SM2S-IMX8PLUS-14N0600E on SM2-MB-EP1 Carrier Board

View File

@ -239,6 +239,34 @@ properties:
- enum:
- mediatek,mt8183-pumpkin
- const: mediatek,mt8183
- description: Google Chinchou (Asus Chromebook CZ1104CM2A/CZ1204CM2A)
items:
- const: google,chinchou-sku0
- const: google,chinchou-sku2
- const: google,chinchou-sku4
- const: google,chinchou-sku5
- const: google,chinchou
- const: mediatek,mt8186
- description: Google Chinchou (Asus Chromebook CZ1104FM2A/CZ1204FM2A/CZ1104CM2A/CZ1204CM2A)
items:
- const: google,chinchou-sku1
- const: google,chinchou-sku3
- const: google,chinchou-sku6
- const: google,chinchou-sku7
- const: google,chinchou-sku17
- const: google,chinchou-sku20
- const: google,chinchou-sku22
- const: google,chinchou-sku23
- const: google,chinchou
- const: mediatek,mt8186
- description: Google Chinchou360 (Asus Chromebook CZ1104FM2A/CZ1204FM2A Flip)
items:
- const: google,chinchou-sku16
- const: google,chinchou-sku18
- const: google,chinchou-sku19
- const: google,chinchou-sku21
- const: google,chinchou
- const: mediatek,mt8186
- description: Google Magneton (Lenovo IdeaPad Slim 3 Chromebook (14M868))
items:
- const: google,steelix-sku393219
@ -263,6 +291,19 @@ properties:
- const: google,steelix-sku196608
- const: google,steelix
- const: mediatek,mt8186
- description: Google Starmie (ASUS Chromebook Enterprise CM30 (CM3001))
items:
- const: google,starmie-sku0
- const: google,starmie-sku2
- const: google,starmie-sku3
- const: google,starmie
- const: mediatek,mt8186
- description: Google Starmie (ASUS Chromebook Enterprise CM30 (CM3001))
items:
- const: google,starmie-sku1
- const: google,starmie-sku4
- const: google,starmie
- const: mediatek,mt8186
- description: Google Steelix (Lenovo 300e Yoga Chromebook Gen 4)
items:
- enum:
@ -307,6 +348,19 @@ properties:
- enum:
- mediatek,mt8186-evb
- const: mediatek,mt8186
- description: Google Ciri (Lenovo Chromebook Duet (11", 9))
items:
- enum:
- google,ciri-sku0
- google,ciri-sku1
- google,ciri-sku2
- google,ciri-sku3
- google,ciri-sku4
- google,ciri-sku5
- google,ciri-sku6
- google,ciri-sku7
- const: google,ciri
- const: mediatek,mt8188
- items:
- enum:
- mediatek,mt8188-evb
@ -316,12 +370,6 @@ properties:
- const: google,hayato-rev1
- const: google,hayato
- const: mediatek,mt8192
- description: Google Hayato rev5
items:
- const: google,hayato-rev5-sku2
- const: google,hayato-sku2
- const: google,hayato
- const: mediatek,mt8192
- description: Google Spherion (Acer Chromebook 514)
items:
- const: google,spherion-rev3
@ -330,11 +378,6 @@ properties:
- const: google,spherion-rev0
- const: google,spherion
- const: mediatek,mt8192
- description: Google Spherion rev4 (Acer Chromebook 514)
items:
- const: google,spherion-rev4
- const: google,spherion
- const: mediatek,mt8192
- items:
- enum:
- mediatek,mt8192-evb

View File

@ -23,7 +23,7 @@ description: |
select:
properties:
compatible:
pattern: "^qcom,.*(apq|ipq|mdm|msm|qcm|qcs|q[dr]u|sa|sc|sd[amx]|sm|x1e)[0-9]+.*$"
pattern: "^qcom,.*(apq|ipq|mdm|msm|qcm|qcs|q[dr]u|sa|sar|sc|sd[amx]|sm|x1[ep])[0-9]+.*$"
required:
- compatible
@ -31,7 +31,8 @@ properties:
compatible:
oneOf:
# Preferred naming style for compatibles of SoC components:
- pattern: "^qcom,(apq|ipq|mdm|msm|qcm|qcs|q[dr]u|sa|sc|sd[amx]|sm|x1e)[0-9]+(pro)?-.*$"
- pattern: "^qcom,(apq|ipq|mdm|msm|qcm|qcs|q[dr]u|sa|sc|sd[amx]|sm|x1[ep])[0-9]+(pro)?-.*$"
- pattern: "^qcom,sar[0-9]+[a-z]?-.*$"
- pattern: "^qcom,(sa|sc)8[0-9]+[a-z][a-z]?-.*$"
# Legacy namings - variations of existing patterns/compatibles are OK,
@ -39,9 +40,9 @@ properties:
- pattern: "^qcom,[ak]pss-wdt-(apq|ipq|mdm|msm|qcm|qcs|q[dr]u|sa|sc|sd[amx]|sm)[0-9]+.*$"
- pattern: "^qcom,gcc-(apq|ipq|mdm|msm|qcm|qcs|q[dr]u|sa|sc|sd[amx]|sm)[0-9]+.*$"
- pattern: "^qcom,mmcc-(apq|ipq|mdm|msm|qcm|qcs|q[dr]u|sa|sc|sd[amx]|sm)[0-9]+.*$"
- pattern: "^qcom,pcie-(apq|ipq|mdm|msm|qcm|qcs|q[dr]u|sa|sc|sd[amx]|sm|x1e)[0-9]+.*$"
- pattern: "^qcom,pcie-(apq|ipq|mdm|msm|qcm|qcs|q[dr]u|sa|sc|sd[amx]|sm|x1[ep])[0-9]+.*$"
- pattern: "^qcom,rpm-(apq|ipq|mdm|msm|qcm|qcs|q[dr]u|sa|sc|sd[amx]|sm)[0-9]+.*$"
- pattern: "^qcom,scm-(apq|ipq|mdm|msm|qcm|qcs|q[dr]u|sa|sc|sd[amx]|sm|x1e)[0-9]+.*$"
- pattern: "^qcom,scm-(apq|ipq|mdm|msm|qcm|qcs|q[dr]u|sa|sc|sd[amx]|sm|x1[ep])[0-9]+.*$"
- enum:
- qcom,dsi-ctrl-6g-qcm2290
- qcom,gpucc-sdm630

View File

@ -19,29 +19,42 @@ description: |
apq8016
apq8026
apq8064
apq8074
apq8084
apq8094
apq8096
ipq4018
ipq4019
ipq5018
ipq5332
ipq5424
ipq6018
ipq8064
ipq8074
ipq9574
mdm9615
msm8226
msm8660
msm8916
msm8917
msm8926
msm8929
msm8939
msm8953
msm8956
msm8960
msm8974
msm8974pro
msm8976
msm8992
msm8994
msm8996
msm8996pro
msm8998
qcs404
qcs615
qcs8300
qcs8550
qcm2290
qcm6490
@ -53,6 +66,7 @@ description: |
sa8155p
sa8540p
sa8775p
sar2130p
sc7180
sc7280
sc8180x
@ -84,7 +98,10 @@ description: |
sm8450
sm8550
sm8650
sm8750
x1e78100
x1e80100
x1p42100
There are many devices in the list below that run the standard ChromeOS
bootloader setup and use the open source depthcharge bootloader to boot the
@ -250,6 +267,11 @@ properties:
- yiming,uz801-v3
- const: qcom,msm8916
- items:
- enum:
- xiaomi,riva
- const: qcom,msm8917
- items:
- enum:
- motorola,potter
@ -352,6 +374,11 @@ properties:
- qcom,ipq5332-ap-mi01.9
- const: qcom,ipq5332
- items:
- enum:
- qcom,ipq5424-rdp466
- const: qcom,ipq5424
- items:
- enum:
- mikrotik,rb3011
@ -408,6 +435,12 @@ properties:
- qcom,qru1000-idp
- const: qcom,qru1000
- description: Qualcomm AR2 Gen1 platform
items:
- enum:
- qcom,qar2130p
- const: qcom,sar2130p
- items:
- enum:
- acer,aspire1
@ -822,8 +855,10 @@ properties:
- items:
- enum:
- huawei,gaokun3
- lenovo,thinkpad-x13s
- microsoft,arcata
- microsoft,blackrock
- qcom,sc8280xp-crd
- qcom,sc8280xp-qrd
- const: qcom,sc8280xp
@ -898,6 +933,16 @@ properties:
- const: qcom,qcs404-evb
- const: qcom,qcs404
- items:
- enum:
- qcom,qcs8300-ride
- const: qcom,qcs8300
- items:
- enum:
- qcom,qcs615-ride
- const: qcom,qcs615
- items:
- enum:
- qcom,sa8155p-adp
@ -1064,6 +1109,18 @@ properties:
- qcom,sm8650-qrd
- const: qcom,sm8650
- items:
- enum:
- qcom,sm8750-mtp
- qcom,sm8750-qrd
- const: qcom,sm8750
- items:
- enum:
- qcom,x1e001de-devkit
- const: qcom,x1e001de
- const: qcom,x1e80100
- items:
- enum:
- lenovo,thinkpad-t14s
@ -1074,6 +1131,7 @@ properties:
- enum:
- asus,vivobook-s15
- dell,xps13-9345
- hp,omnibook-x14
- lenovo,yoga-slim7x
- microsoft,romulus13
- microsoft,romulus15
@ -1081,6 +1139,11 @@ properties:
- qcom,x1e80100-qcp
- const: qcom,x1e80100
- items:
- enum:
- qcom,x1p42100-crd
- const: qcom,x1p42100
# Board compatibles go above
qcom,msm-id:
@ -1158,6 +1221,7 @@ allOf:
- qcom,apq8026
- qcom,apq8094
- qcom,apq8096
- qcom,msm8917
- qcom,msm8939
- qcom,msm8953
- qcom,msm8956

View File

@ -81,6 +81,17 @@ properties:
- const: azw,beelink-a1
- const: rockchip,rk3328
- description: BigTreeTech CB2 Manta M4/8P
items:
- const: bigtreetech,cb2-manta
- const: bigtreetech,cb2
- const: rockchip,rk3566
- description: BigTreeTech Pi 2
items:
- const: bigtreetech,pi2
- const: rockchip,rk3566
- description: bq Curie 2 tablet
items:
- const: mundoreader,bq-curie2
@ -167,6 +178,13 @@ properties:
- const: engicam,px30-core
- const: rockchip,px30
- description: Firefly Core-3588J-based boards
items:
- enum:
- firefly,itx-3588j
- const: firefly,core-3588j
- const: rockchip,rk3588
- description: Firefly Core-PX30-JD4 on MB-JD4-PX30 baseboard
items:
- const: firefly,px30-jd4-core-mb
@ -597,6 +615,11 @@ properties:
- const: google,veyron
- const: rockchip,rk3288
- description: H96 Max V58 TV Box
items:
- const: haochuangyi,h96-max-v58
- const: rockchip,rk3588
- description: Haoyu MarsBoard RK3066
items:
- const: haoyu,marsboard-rk3066
@ -812,6 +835,12 @@ properties:
- const: radxa,e20c
- const: rockchip,rk3528
- description: Radxa E52C
items:
- const: radxa,e52c
- const: rockchip,rk3582
- const: rockchip,rk3588s
- description: Radxa Rock
items:
- const: radxa,rock
@ -1006,6 +1035,21 @@ properties:
- const: rockchip,rk3399-sapphire-excavator
- const: rockchip,rk3399
- description: Rockchip RK3566 BOX Evaluation Demo board
items:
- const: rockchip,rk3566-box-demo
- const: rockchip,rk3566
- description: Rockchip RK3568 Evaluation board
items:
- const: rockchip,rk3568-evb1-v10
- const: rockchip,rk3568
- description: Rockchip RK3576 Evaluation board
items:
- const: rockchip,rk3576-evb1-v10
- const: rockchip,rk3576
- description: Rockchip RK3588 Evaluation board
items:
- const: rockchip,rk3588-evb1-v10
@ -1026,6 +1070,23 @@ properties:
- const: rockchip,rk3588-toybrick-x0
- const: rockchip,rk3588
- description: Sinovoip RK3308 Banana Pi P2 Pro
items:
- const: sinovoip,rk3308-bpi-p2pro
- const: rockchip,rk3308
- description: Sinovoip RK3568 Banana Pi R2 Pro
items:
- const: sinovoip,rk3568-bpi-r2pro
- const: rockchip,rk3568
- description: Sonoff iHost Smart Home Hub
items:
- const: itead,sonoff-ihost
- enum:
- rockchip,rv1126
- rockchip,rv1109
- description: Theobroma Systems PX30-uQ7 with Haikou baseboard
items:
- const: tsd,px30-ringneck-haikou
@ -1075,9 +1136,11 @@ properties:
- const: xunlong,orangepi-3b
- const: rockchip,rk3566
- description: Xunlong Orange Pi 5 Plus
- description: Xunlong Orange Pi 5 Max/Plus
items:
- const: xunlong,orangepi-5-plus
- enum:
- xunlong,orangepi-5-max
- xunlong,orangepi-5-plus
- const: rockchip,rk3588
- description: Xunlong Orange Pi R1 Plus / LTS
@ -1099,33 +1162,6 @@ properties:
- const: zkmagic,a95x-z2
- const: rockchip,rk3318
- description: Rockchip RK3566 BOX Evaluation Demo board
items:
- const: rockchip,rk3566-box-demo
- const: rockchip,rk3566
- description: Rockchip RK3568 Evaluation board
items:
- const: rockchip,rk3568-evb1-v10
- const: rockchip,rk3568
- description: Sinovoip RK3308 Banana Pi P2 Pro
items:
- const: sinovoip,rk3308-bpi-p2pro
- const: rockchip,rk3308
- description: Sinovoip RK3568 Banana Pi R2 Pro
items:
- const: sinovoip,rk3568-bpi-r2pro
- const: rockchip,rk3568
- description: Sonoff iHost Smart Home Hub
items:
- const: itead,sonoff-ihost
- enum:
- rockchip,rv1126
- rockchip,rv1109
additionalProperties: true
...

View File

@ -240,6 +240,9 @@ properties:
items:
- enum:
- samsung,c1s # Samsung Galaxy Note20 5G (SM-N981B)
- samsung,r8s # Samsung Galaxy S20 FE (SM-G780F)
- samsung,x1s # Samsung Galaxy S20 5G (SM-G981B)
- samsung,x1slte # Samsung Galaxy S20 (SM-G980F)
- const: samsung,exynos990
- description: Exynos Auto v9 based boards

View File

@ -91,6 +91,13 @@ properties:
- const: dh,stm32mp153c-dhcor-som
- const: st,stm32mp153
- description: Octavo OSD32MP153 System-in-Package based boards
items:
- enum:
- lxa,stm32mp153c-tac-gen3 # Linux Automation TAC (Generation 3)
- const: oct,stm32mp153x-osd32
- const: st,stm32mp153
- items:
- enum:
- shiratech,stm32mp157a-iot-box # IoT Box

View File

@ -26,6 +26,7 @@ properties:
- mediatek,mt8173-disp-ovl
- mediatek,mt8183-disp-ovl
- mediatek,mt8192-disp-ovl
- mediatek,mt8195-disp-ovl
- mediatek,mt8195-mdp3-ovl
- items:
- enum:
@ -36,16 +37,17 @@ properties:
- enum:
- mediatek,mt6795-disp-ovl
- const: mediatek,mt8173-disp-ovl
- items:
- enum:
- mediatek,mt8188-disp-ovl
- mediatek,mt8195-disp-ovl
- const: mediatek,mt8183-disp-ovl
- items:
- enum:
- mediatek,mt8186-disp-ovl
- mediatek,mt8365-disp-ovl
- const: mediatek,mt8192-disp-ovl
- items:
- const: mediatek,mt8188-disp-ovl
- const: mediatek,mt8195-disp-ovl
- items:
- const: mediatek,mt8188-mdp3-ovl
- const: mediatek,mt8195-mdp3-ovl
reg:
maxItems: 1

View File

@ -33,6 +33,7 @@ properties:
- rockchip,rk3188-mali
- rockchip,rk3228-mali
- samsung,exynos4210-mali
- st,stih410-mali
- stericsson,db8500-mali
- xlnx,zynqmp-mali
- const: arm,mali-400

View File

@ -26,6 +26,9 @@ properties:
- items:
- enum:
- mediatek,mt6873-keypad
- mediatek,mt8183-keypad
- mediatek,mt8365-keypad
- mediatek,mt8516-keypad
- const: mediatek,mt6779-keypad
reg:

View File

@ -0,0 +1,136 @@
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/interconnect/qcom,sm8750-rpmh.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Qualcomm RPMh Network-On-Chip Interconnect on SM8750
maintainers:
- Abel Vesa <abel.vesa@linaro.org>
- Neil Armstrong <neil.armstrong@linaro.org>
description: |
RPMh interconnect providers support system bandwidth requirements through
RPMh hardware accelerators known as Bus Clock Manager (BCM). The provider is
able to communicate with the BCM through the Resource State Coordinator (RSC)
associated with each execution environment. Provider nodes must point to at
least one RPMh device child node pertaining to their RSC and each provider
can map to multiple RPMh resources.
See also:: include/dt-bindings/interconnect/qcom,sm8750-rpmh.h
properties:
compatible:
enum:
- qcom,sm8750-aggre1-noc
- qcom,sm8750-aggre2-noc
- qcom,sm8750-clk-virt
- qcom,sm8750-cnoc-main
- qcom,sm8750-config-noc
- qcom,sm8750-gem-noc
- qcom,sm8750-lpass-ag-noc
- qcom,sm8750-lpass-lpiaon-noc
- qcom,sm8750-lpass-lpicx-noc
- qcom,sm8750-mc-virt
- qcom,sm8750-mmss-noc
- qcom,sm8750-nsp-noc
- qcom,sm8750-pcie-anoc
- qcom,sm8750-system-noc
reg:
maxItems: 1
clocks:
minItems: 1
maxItems: 2
required:
- compatible
allOf:
- $ref: qcom,rpmh-common.yaml#
- if:
properties:
compatible:
contains:
enum:
- qcom,sm8750-clk-virt
- qcom,sm8750-mc-virt
then:
properties:
reg: false
else:
required:
- reg
- if:
properties:
compatible:
contains:
enum:
- qcom,sm8750-pcie-anoc
then:
properties:
clocks:
items:
- description: aggre-NOC PCIe AXI clock
- description: cfg-NOC PCIe a-NOC AHB clock
- if:
properties:
compatible:
contains:
enum:
- qcom,sm8750-aggre1-noc
then:
properties:
clocks:
items:
- description: aggre UFS PHY AXI clock
- description: aggre USB3 PRIM AXI clock
- if:
properties:
compatible:
contains:
enum:
- qcom,sm8750-aggre2-noc
then:
properties:
clocks:
items:
- description: RPMH CC IPA clock
- if:
properties:
compatible:
contains:
enum:
- qcom,sm8750-aggre1-noc
- qcom,sm8750-aggre2-noc
- qcom,sm8750-pcie-anoc
then:
required:
- clocks
else:
properties:
clocks: false
unevaluatedProperties: false
examples:
- |
clk_virt: interconnect-0 {
compatible = "qcom,sm8750-clk-virt";
#interconnect-cells = <2>;
qcom,bcm-voters = <&apps_bcm_voter>;
};
aggre1_noc: interconnect@16e0000 {
compatible = "qcom,sm8750-aggre1-noc";
reg = <0x016e0000 0x16400>;
#interconnect-cells = <2>;
clocks = <&gcc_phy_axi_clk>, <&gcc_prim_axi_clk>;
qcom,bcm-voters = <&apps_bcm_voter>;
};

View File

@ -13,6 +13,7 @@ properties:
compatible:
items:
- enum:
- amlogic,meson-hhi-sysctrl
- amlogic,meson-gx-hhi-sysctrl
- amlogic,meson-gx-ao-sysctrl
- amlogic,meson-axg-hhi-sysctrl
@ -36,6 +37,19 @@ properties:
type: object
allOf:
- if:
properties:
compatible:
enum:
- amlogic,meson-hhi-sysctrl
then:
properties:
clock-controller:
$ref: /schemas/clock/amlogic,meson8-clkc.yaml#
pinctrl: false
phy: false
- if:
properties:
compatible:

View File

@ -360,19 +360,21 @@ properties:
- renesas,white-hawk-cpu # White Hawk CPU board (RTP8A779G0ASKB0FC0SA000)
- const: renesas,r8a779g0
- description: R-Car V4H (R8A779G2)
items:
- enum:
- renesas,white-hawk-single # White Hawk Single board (RTP8A779G2ASKB0F10SA001)
- const: renesas,r8a779g2
- const: renesas,r8a779g0
- items:
- enum:
- renesas,white-hawk-breakout # White Hawk BreakOut board (RTP8A779G0ASKB0SB0SA000)
- const: renesas,white-hawk-cpu
- const: renesas,r8a779g0
- description: R-Car V4H (R8A779G[23])
items:
- enum:
- renesas,white-hawk-single # White Hawk Single board (RTP8A779G[23]ASKB0F10SA001)
- enum:
- renesas,r8a779g2 # ES2.x
- renesas,r8a779g3 # ES3.x
- const: renesas,r8a779g0
- description: R-Car V4M (R8A779H0)
items:
- enum:

View File

@ -23,6 +23,7 @@ properties:
- rockchip,rk3576-bigcore-grf
- rockchip,rk3576-cci-grf
- rockchip,rk3576-gpu-grf
- rockchip,rk3576-hdptxphy-grf
- rockchip,rk3576-litcore-grf
- rockchip,rk3576-npu-grf
- rockchip,rk3576-php-grf

View File

@ -92,6 +92,16 @@ properties:
description: |
This property is as per sci-pm-domain.txt.
clocks:
items:
- description: ICSSG_CORE Clock
- description: ICSSG_IEP Clock
- description: ICSSG_RGMII_MHZ_250 Clock
- description: ICSSG_RGMII_MHZ_50 Clock
- description: ICSSG_RGMII_MHZ_5 Clock
- description: ICSSG_UART Clock
- description: ICSSG_ICLK Clock
patternProperties:
memories@[a-f0-9]+$:

View File

@ -47,7 +47,9 @@ properties:
- const: allwinner,sun8i-v3s-system-control
- const: allwinner,sun8i-h3-system-control
- items:
- const: allwinner,sun50i-h6-system-control
- enum:
- allwinner,sun50i-a100-system-control
- allwinner,sun50i-h6-system-control
- const: allwinner,sun50i-a64-system-control
reg:

View File

@ -577,6 +577,8 @@ patternProperties:
description: Gemtek Technology Co., Ltd.
"^genesys,.*":
description: Genesys Logic, Inc.
"^genexis,.*":
description: Genexis BV/AB
"^geniatech,.*":
description: Geniatech, Inc.
"^giantec,.*":

View File

@ -6713,19 +6713,14 @@ L: linux-rtc@vger.kernel.org
S: Maintained
F: drivers/rtc/rtc-sd2405al.c
DH ELECTRONICS IMX6 DHCOM/DHCOR BOARD SUPPORT
DH ELECTRONICS DHSOM SOM AND BOARD SUPPORT
M: Christoph Niedermaier <cniedermaier@dh-electronics.com>
L: kernel@dh-electronics.com
S: Maintained
F: arch/arm/boot/dts/nxp/imx/imx6*-dhcom-*
F: arch/arm/boot/dts/nxp/imx/imx6*-dhcor-*
DH ELECTRONICS STM32MP1 DHCOM/DHCOR BOARD SUPPORT
M: Marek Vasut <marex@denx.de>
L: kernel@dh-electronics.com
S: Maintained
F: arch/arm/boot/dts/st/stm32mp1*-dhcom-*
F: arch/arm/boot/dts/st/stm32mp1*-dhcor-*
N: dhcom
N: dhcor
N: dhsom
DIALOG SEMICONDUCTOR DRIVERS
M: Support Opensource <support.opensource@diasemi.com>
@ -9823,9 +9818,12 @@ F: drivers/firmware/google/
GOOGLE TENSOR SoC SUPPORT
M: Peter Griffin <peter.griffin@linaro.org>
R: André Draszik <andre.draszik@linaro.org>
R: Tudor Ambarus <tudor.ambarus@linaro.org>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
L: linux-samsung-soc@vger.kernel.org
S: Maintained
C: irc://irc.oftc.net/pixel6-kernel-dev
F: Documentation/devicetree/bindings/clock/google,gs101-clock.yaml
F: arch/arm64/boot/dts/exynos/google/
F: drivers/clk/samsung/clk-gs101.c

View File

@ -62,6 +62,14 @@
status = "okay";
};
&codec {
allwinner,audio-routing =
"Headphone", "HP",
"Headphone", "HPCOM",
"MIC", "Mic";
status = "okay";
};
&usb_otg {
dr_mode = "otg";
status = "okay";

View File

@ -6,6 +6,7 @@
#include <dt-bindings/clock/suniv-ccu-f1c100s.h>
#include <dt-bindings/reset/suniv-ccu-f1c100s.h>
#include <dt-bindings/dma/sun4i-a10.h>
/ {
#address-cells = <1>;
@ -159,6 +160,15 @@
status = "disabled";
};
dma: dma-controller@1c02000 {
compatible = "allwinner,suniv-f1c100s-dma";
reg = <0x01c02000 0x1000>;
interrupts = <18>;
clocks = <&ccu CLK_BUS_DMA>;
resets = <&ccu RST_BUS_DMA>;
#dma-cells = <2>;
};
ccu: clock@1c20000 {
compatible = "allwinner,suniv-f1c100s-ccu";
reg = <0x01c20000 0x400>;
@ -326,5 +336,19 @@
resets = <&ccu RST_BUS_UART2>;
status = "disabled";
};
codec: codec@1c23c00 {
#sound-dai-cells = <0>;
compatible = "allwinner,suniv-f1c100s-codec";
reg = <0x01c23c00 0x400>;
interrupts = <21>;
clocks = <&ccu CLK_BUS_CODEC>, <&ccu CLK_CODEC>;
clock-names = "apb", "codec";
dmas = <&dma SUN4I_DMA_NORMAL 12>,
<&dma SUN4I_DMA_NORMAL 12>;
dma-names = "rx", "tx";
resets = <&ccu RST_BUS_CODEC>;
status = "disabled";
};
};
};

View File

@ -255,8 +255,6 @@
usb0: usb@c9040000 {
compatible = "snps,dwc2";
#address-cells = <1>;
#size-cells = <0>;
reg = <0xc9040000 0x40000>;
interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
phys = <&usb0_phy>;
@ -270,8 +268,6 @@
usb1: usb@c90c0000 {
compatible = "snps,dwc2";
#address-cells = <1>;
#size-cells = <0>;
reg = <0xc90c0000 0x40000>;
interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
phys = <&usb1_phy>;

View File

@ -6,6 +6,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \
aspeed-bmc-amd-daytonax.dtb \
aspeed-bmc-amd-ethanolx.dtb \
aspeed-bmc-ampere-mtjade.dtb \
aspeed-bmc-ampere-mtjefferson.dtb \
aspeed-bmc-ampere-mtmitchell.dtb \
aspeed-bmc-arm-stardragon4800-rep2.dtb \
aspeed-bmc-asrock-e3c246d4i.dtb \
@ -40,6 +41,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \
aspeed-bmc-ibm-rainier.dtb \
aspeed-bmc-ibm-rainier-1s4u.dtb \
aspeed-bmc-ibm-rainier-4u.dtb \
aspeed-bmc-ibm-sbp1.dtb \
aspeed-bmc-ibm-system1.dtb \
aspeed-bmc-intel-s2600wf.dtb \
aspeed-bmc-inspur-fp5280g2.dtb \

View File

@ -0,0 +1,622 @@
// SPDX-License-Identifier: GPL-2.0-only
// Copyright 2024 Ampere Computing LLC.
/dts-v1/;
#include "aspeed-g6.dtsi"
#include <dt-bindings/i2c/i2c.h>
#include <dt-bindings/gpio/aspeed-gpio.h>
/ {
model = "Ampere Mt. Jefferson BMC";
compatible = "ampere,mtjefferson-bmc", "aspeed,ast2600";
aliases {
i2c20 = &i2c4_bus70_chn0;
i2c22 = &i2c4_bus70_chn2;
/*
* I2C OCP alias port
*/
i2c30 = &ocpslot;
/*
* I2C NVMe alias port
*/
i2c48 = &nvmeslot_0;
i2c49 = &nvmeslot_1;
i2c50 = &nvmeslot_2;
i2c51 = &nvmeslot_3;
i2c52 = &nvmeslot_4;
i2c53 = &nvmeslot_5;
i2c54 = &nvmeslot_6;
i2c55 = &nvmeslot_7;
i2c56 = &nvmeslot_8;
i2c57 = &nvmeslot_9;
i2c58 = &nvmeslot_10;
i2c59 = &nvmeslot_11;
};
chosen {
stdout-path = &uart5;
};
memory@80000000 {
device_type = "memory";
reg = <0x80000000 0x80000000>;
};
reserved-memory {
#address-cells = <1>;
#size-cells = <1>;
ranges;
gfx_memory: framebuffer {
size = <0x01000000>;
alignment = <0x01000000>;
compatible = "shared-dma-pool";
reusable;
};
video_engine_memory: video {
size = <0x04000000>;
alignment = <0x01000000>;
compatible = "shared-dma-pool";
reusable;
};
vga_memory: region@bf000000 {
no-map;
compatible = "shared-dma-pool";
reg = <0xbf000000 0x01000000>; /* 16M */
};
};
voltage_mon_reg: voltage-mon-regulator {
compatible = "regulator-fixed";
regulator-name = "ltc2497_reg";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
leds {
compatible = "gpio-leds";
led-bmc-ready {
gpios = <&gpio0 ASPEED_GPIO(W, 5) (GPIO_ACTIVE_HIGH | GPIO_TRANSITORY)>;
};
led-sw-heartbeat {
gpios = <&gpio0 ASPEED_GPIO(N, 3) GPIO_ACTIVE_HIGH>;
};
led-identify {
gpios = <&gpio0 ASPEED_GPIO(S, 3) GPIO_ACTIVE_HIGH>;
};
led-fault {
gpios = <&gpio0 ASPEED_GPIO(P, 4) GPIO_ACTIVE_HIGH>;
};
};
iio-hwmon {
compatible = "iio-hwmon";
io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>,
<&adc_i2c_2 0>, <&adc_i2c_2 1>,
<&adc_i2c_2 2>, <&adc_i2c_2 3>,
<&adc_i2c_2 4>, <&adc_i2c_2 5>,
<&adc_i2c_2 6>, <&adc_i2c_2 7>,
<&adc_i2c_2 8>, <&adc_i2c_2 9>,
<&adc_i2c_2 10>, <&adc_i2c_2 11>,
<&adc_i2c_2 12>, <&adc_i2c_2 13>,
<&adc_i2c_2 14>, <&adc_i2c_2 15>,
<&adc_i2c_0 0>, <&adc_i2c_0 1>,
<&adc_i2c_0 2>, <&adc_i2c_0 3>,
<&adc_i2c_0 4>, <&adc_i2c_0 5>,
<&adc_i2c_0 6>, <&adc_i2c_0 7>,
<&adc_i2c_0 8>, <&adc_i2c_0 9>,
<&adc_i2c_0 10>, <&adc_i2c_0 11>,
<&adc_i2c_0 12>;
};
};
&mdio0 {
status = "okay";
ethphy0: ethernet-phy@0 {
compatible = "ethernet-phy-ieee802.3-c22";
reg = <0>;
};
};
&mac0 {
status = "okay";
phy-mode = "rgmii";
phy-handle = <&ethphy0>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_rgmii1_default>;
};
&mac3 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_rmii4_default>;
use-ncsi;
};
&fmc {
status = "okay";
flash@0 {
status = "okay";
m25p,fast-read;
label = "bmc";
spi-max-frequency = <50000000>;
#include "openbmc-flash-layout-64.dtsi"
};
flash@1 {
status = "okay";
m25p,fast-read;
label = "alt-bmc";
spi-max-frequency = <50000000>;
#include "openbmc-flash-layout-64-alt.dtsi"
};
};
&spi1 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi1_default>;
flash@0 {
status = "okay";
m25p,fast-read;
label = "pnor";
spi-max-frequency = <20000000>;
};
};
&uart1 {
status = "okay";
};
&uart2 {
status = "okay";
};
&i2c0 {
status = "okay";
};
&i2c1 {
status = "okay";
};
&i2c2 {
status = "okay";
};
&i2c3 {
status = "okay";
bus-frequency = <1000000>;
multi-master;
mctp-controller;
mctp@10 {
compatible = "mctp-i2c-controller";
reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
};
};
&i2c4 {
status = "okay";
eeprom@50 {
compatible = "atmel,24c64";
reg = <0x50>;
pagesize = <32>;
};
i2c-mux@70 {
compatible = "nxp,pca9545";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x70>;
i2c-mux-idle-disconnect;
i2c4_bus70_chn0: i2c@0 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x0>;
eeprom@52 {
compatible = "atmel,24c256";
reg = <0x52>;
pagesize = <32>;
};
temperature-sensor@48 {
compatible = "ti,tmp75";
reg = <0x48>;
};
temperature-sensor@49 {
compatible = "ti,tmp75";
reg = <0x49>;
};
temperature-sensor@4a{
compatible = "ti,tmp75";
reg = <0x4a>;
};
temperature-sensor@4b {
compatible = "ti,tmp464";
reg = <0x4b>;
#address-cells = <1>;
#size-cells = <0>;
channel@0 {
reg = <0x0>;
status = "disabled";
};
channel@1 {
reg = <0x1>;
status = "disabled";
};
channel@2 {
reg = <0x2>;
status = "disabled";
};
channel@3 {
reg = <0x3>;
status = "disabled";
};
channel@4 {
reg = <0x4>;
};
};
temperature-sensor@4d {
compatible = "ti,tmp75";
reg = <0x4d>;
};
temperature-sensor@4e {
compatible = "ti,tmp75";
reg = <0x4e>;
};
temperature-sensor@4f {
compatible = "ti,tmp75";
reg = <0x4f>;
};
temperature-sensor@28 {
compatible = "nuvoton,nct7802";
reg = <0x28>;
#address-cells = <1>;
#size-cells = <0>;
channel@1 { /* RTD1 */
reg = <1>;
sensor-type = "temperature";
temperature-mode = "thermistor";
};
};
adc_i2c_0: adc@14 {
compatible = "lltc,ltc2497";
reg = <0x14>;
vref-supply = <&voltage_mon_reg>;
#io-channel-cells = <1>;
};
};
i2c4_bus70_chn2: i2c@2 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x2>;
adc_i2c_2: adc@14 {
compatible = "lltc,ltc2497";
reg = <0x14>;
vref-supply = <&voltage_mon_reg>;
#io-channel-cells = <1>;
};
};
};
};
&i2c5 {
status = "okay";
i2c-mux@70 {
compatible = "nxp,pca9548";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x70>;
i2c-mux-idle-disconnect;
i2c@0 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x0>;
i2c-mux@71 {
compatible = "nxp,pca9548";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x71>;
i2c-mux-idle-disconnect;
nvmeslot_8: i2c@0 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x0>;
};
nvmeslot_9: i2c@1 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x1>;
};
nvmeslot_10: i2c@2 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x2>;
};
nvmeslot_11: i2c@3 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x3>;
};
};
i2c-mux@72 {
compatible = "nxp,pca9548";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x72>;
i2c-mux-idle-disconnect;
nvmeslot_4: i2c@4 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x4>;
};
nvmeslot_5: i2c@5 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x5>;
};
nvmeslot_6: i2c@6 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x6>;
};
nvmeslot_7: i2c@7 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x7>;
};
};
i2c-mux@74 {
compatible = "nxp,pca9548";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x74>;
i2c-mux-idle-disconnect;
ocpslot: i2c@0 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x0>;
ocpslot_temp: temperature-sensor@1f {
compatible = "ti,tmp421";
reg = <0x1f>;
#address-cells = <1>;
#size-cells = <0>;
channel@0 {
reg = <0x0>;
status = "disabled";
};
channel@1 {
reg = <0x1>;
};
};
};
nvmeslot_0: i2c@4 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x4>;
};
nvmeslot_1: i2c@5 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x5>;
};
nvmeslot_2: i2c@6 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x6>;
};
nvmeslot_3: i2c@7 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x7>;
};
};
};
};
};
&i2c6 {
status = "okay";
rtc@51 {
compatible = "nxp,pcf8563";
reg = <0x51>;
};
};
&i2c7 {
status = "okay";
temperature-sensor@4f {
compatible = "ti,tmp75";
reg = <0x4f>;
};
};
&i2c8 {
status = "okay";
fan-controller@5c {
compatible = "onnn,adt7462";
reg = <0x5c>;
};
};
&i2c9 {
status = "okay";
#address-cells = <1>;
#size-cells = <0>;
eeprom@50 {
compatible = "atmel,24c02";
reg = <0x50>;
};
eeprom@52 {
compatible = "atmel,24c02";
reg = <0x52>;
};
temperature-sensor@18 {
compatible = "jedec,jc-42.4-temp";
reg = <0x18>;
};
temperature-sensor@1a {
compatible = "jedec,jc-42.4-temp";
reg = <0x1a>;
};
};
&i2c10 {
status = "okay";
};
&i2c11 {
status = "okay";
ssif-bmc@10 {
compatible = "ssif-bmc";
reg = <0x10>;
};
};
&i2c14 {
status = "okay";
eeprom@50 {
compatible = "atmel,24c64";
reg = <0x50>;
pagesize = <32>;
};
bmc_ast2600_cpu: temperature-sensor@48 {
compatible = "ti,tmp75";
reg = <0x48>;
};
};
&i2c15 {
status = "okay";
gpio_expander1: gpio-expander@22 {
compatible = "nxp,pca9535";
reg = <0x22>;
gpio-controller;
#gpio-cells = <2>;
gpio-line-names =
"presence-ocp1","presence-ocp2",
"","",
"","",
"","",
"","",
"","",
"","",
"","";
};
};
&adc0 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default
&pinctrl_adc2_default>;
};
&vhub {
status = "okay";
};
&video {
status = "okay";
memory-region = <&video_engine_memory>;
};
&gpio0 {
gpio-line-names =
/*A0-A7*/ "","","","","cpu-type-detect","i2c2-reset-n","i2c6-reset-n","i2c5-reset-n",
/*B0-B7*/ "","","","","host0-sysreset-n","host0-pmin-n","fru-rd-complete",
"chassis-id-sel",
/*C0-C7*/ "s0-vrd-fault-n","","bmc-debug-mode","","cpld-3v3-irq-n","","vrd-sel",
"spd-sel",
/*D0-D7*/ "presence-ps0","presence-ps1","hsc-12vmain-alt2-n","ext-high-temp-n",
"","","","",
/*E0-E7*/ "eth-phy-rst-n","eth-phy-int-n","","","","","","",
/*F0-F7*/ "s0-pcp-oc-warn-n","","power-chassis-control",
"cpu-bios-recover","s0-heartbeat","hs-scout-proc-hot","s0-vr-hot-n","",
/*G0-G7*/ "","","hsc-12vmain-alt1-n","","","bp-cpld-program-en","led-fp-sta-gr",
"led-fp-sta-amb",
/*H0-H7*/ "jtag-program-sel","jtag-cmpl2","wd-disable-n","power-chassis-good","","",
"","",
/*I0-I7*/ "","","","","","","power-button","rtc-battery-voltage-read-enable",
/*J0-J7*/ "","","","","","","","",
/*K0-K7*/ "","","","","","","","",
/*L0-L7*/ "","","","","reset-button","","","",
/*M0-M7*/ "nmi-n","s0-ddr-save","soc-spi-nor-access","presence-cpu0","s0-rtc-lock",
"","","",
/*N0-N7*/ "hpm-fw-recovery","hpm-stby-rst-n","jtag-sel-s0","led-sw-hb",
"jtag-dbgr-prsnt-n","","","",
/*O0-O7*/ "","","","","","","","",
/*P0-P7*/ "ps0-ac-loss-n","ps1-ac-loss-n","","","led-fault","user-mode","jtag-srst-n",
"led-bmc-hb",
/*Q0-Q7*/ "","","","","","","","",
/*R0-R7*/ "","","","","","","","",
/*S0-S7*/ "","","identify-button","led-identify","","spi-nor-access","host0-ready","",
/*T0-T7*/ "","","","","","","","",
/*U0-U7*/ "","","","","","","","",
/*V0-V7*/ "s0-hightemp-n","s0-fault-alert","s0-sys-auth-failure-n",
"host0-reboot-ack-n","s0-fw-boot-ok","host0-shd-req-n",
"host0-shd-ack-n","s0-overtemp-n",
/*W0-W7*/ "ocp-aux-pwren","ocp-main-pwren","ocp-pgood","",
"bmc-ok","bmc-ready","spi0-program-sel","spi0-backup-sel",
/*X0-X7*/ "","","","","","","","",
/*Y0-Y7*/ "","","","vrd-prg-en-n","","","","host0-special-boot",
/*Z0-Z7*/ "","ps0-pgood","ps1-pgood","","","","","";
ocp-aux-pwren-hog {
gpio-hog;
gpios = <ASPEED_GPIO(W, 0) GPIO_ACTIVE_HIGH>;
output-high;
line-name = "ocp-aux-pwren";
};
};
&gpio1 {
gpio-line-names =
/*18A0-18A7*/ "","","","","","","","",
/*18B0-18B7*/ "","","","","s0-soc-pgood","vga-ft-press-n","emmc-rst-n","s01-uart1-sel",
/*18C0-18C7*/ "uart1-mode0","uart1-mode1","uart2-mode0","uart2-mode1",
"","","","",
/*18D0-18D7*/ "","","","","","","","",
/*18E0-18E3*/ "","","","";
};

View File

@ -677,6 +677,12 @@
#size-cells = <0>;
#gpio-cells = <2>;
gpio-line-names =
"ext-vref-sel","","presence-hdd-bp5-n","presence-hdd-bp6-n",
"","bmc-riser-en-n","bmc-ocp1-en-n","bmc-ocp0-en-n",
"","","","",
"","","","";
bmc-ocp0-en-hog {
gpio-hog;
gpios = <7 GPIO_ACTIVE_LOW>;
@ -684,6 +690,16 @@
line-name = "bmc-ocp0-en-n";
};
};
fan-controller0@20 {
compatible = "maxim,max31790";
reg = <0x20>;
};
fan-controller1@2f {
compatible = "maxim,max31790";
reg = <0x2f>;
};
};
&i2c9 {
@ -958,7 +974,7 @@
"fan-fault","psu-fault",
"","",
"","",
"","",
"gpi0","gpi1",
"","",
"","",
"","",

View File

@ -50,14 +50,14 @@
i2c45 = &i2c0mux5ch1;
i2c46 = &i2c0mux5ch2;
i2c47 = &i2c0mux5ch3;
i2c48 = &i2c30mux0ch0;
i2c49 = &i2c30mux0ch1;
i2c50 = &i2c30mux0ch2;
i2c51 = &i2c30mux0ch3;
i2c52 = &i2c30mux0ch4;
i2c53 = &i2c30mux0ch5;
i2c54 = &i2c30mux0ch6;
i2c55 = &i2c30mux0ch7;
i2c48 = &i2c5mux0ch0;
i2c49 = &i2c5mux0ch1;
i2c50 = &i2c5mux0ch2;
i2c51 = &i2c5mux0ch3;
i2c52 = &i2c5mux0ch4;
i2c53 = &i2c5mux0ch5;
i2c54 = &i2c5mux0ch6;
i2c55 = &i2c5mux0ch7;
};
chosen {
@ -153,6 +153,13 @@
status = "okay";
};
&mac2 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ncsi3_default>;
use-ncsi;
};
&mac3 {
status = "okay";
pinctrl-names = "default";
@ -185,6 +192,7 @@
reg = <0x71>;
#address-cells = <1>;
#size-cells = <0>;
i2c-mux-idle-disconnect;
i2c0mux0ch0: i2c@0 {
#address-cells = <1>;
@ -213,6 +221,7 @@
reg = <0x72>;
#address-cells = <1>;
#size-cells = <0>;
i2c-mux-idle-disconnect;
i2c0mux1ch0: i2c@0 {
#address-cells = <1>;
@ -242,79 +251,6 @@
#address-cells = <1>;
#size-cells = <0>;
reg = <2>;
i2c-mux@70 {
compatible = "nxp,pca9548";
reg = <0x70>;
#address-cells = <1>;
#size-cells = <0>;
i2c30mux0ch0: i2c@0 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
};
i2c30mux0ch1: i2c@1 {
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
};
i2c30mux0ch2: i2c@2 {
#address-cells = <1>;
#size-cells = <0>;
reg = <2>;
};
i2c30mux0ch3: i2c@3 {
#address-cells = <1>;
#size-cells = <0>;
reg = <3>;
};
i2c30mux0ch4: i2c@4 {
#address-cells = <1>;
#size-cells = <0>;
reg = <4>;
};
i2c30mux0ch5: i2c@5 {
#address-cells = <1>;
#size-cells = <0>;
reg = <5>;
};
i2c30mux0ch6: i2c@6 {
#address-cells = <1>;
#size-cells = <0>;
reg = <6>;
// HDD FRU EEPROM
eeprom@52 {
compatible = "atmel,24c64";
reg = <0x52>;
};
};
i2c30mux0ch7: i2c@7 {
#address-cells = <1>;
#size-cells = <0>;
reg = <7>;
power-sensor@40 {
compatible = "ti,ina230";
reg = <0x40>;
shunt-resistor = <2000>;
};
power-sensor@41 {
compatible = "ti,ina230";
reg = <0x41>;
shunt-resistor = <2000>;
};
power-sensor@44 {
compatible = "ti,ina230";
reg = <0x44>;
shunt-resistor = <2000>;
};
power-sensor@45 {
compatible = "ti,ina230";
reg = <0x45>;
shunt-resistor = <2000>;
};
};
};
};
i2c0mux1ch3: i2c@3 {
#address-cells = <1>;
@ -328,6 +264,7 @@
reg = <0x73>;
#address-cells = <1>;
#size-cells = <0>;
i2c-mux-idle-disconnect;
i2c0mux2ch0: i2c@0 {
#address-cells = <1>;
@ -356,6 +293,7 @@
reg = <0x75>;
#address-cells = <1>;
#size-cells = <0>;
i2c-mux-idle-disconnect;
i2c0mux3ch0: i2c@0 {
#address-cells = <1>;
@ -384,6 +322,7 @@
reg = <0x76>;
#address-cells = <1>;
#size-cells = <0>;
i2c-mux-idle-disconnect;
i2c0mux4ch0: i2c@0 {
#address-cells = <1>;
@ -426,6 +365,7 @@
reg = <0x77>;
#address-cells = <1>;
#size-cells = <0>;
i2c-mux-idle-disconnect;
i2c0mux5ch0: i2c@0 {
#address-cells = <1>;
@ -512,12 +452,12 @@
power-monitor@42 {
compatible = "lltc,ltc4287";
reg = <0x42>;
shunt-resistor-micro-ohms = <200>;
shunt-resistor-micro-ohms = <100>;
};
power-monitor@43 {
compatible = "lltc,ltc4287";
reg = <0x43>;
shunt-resistor-micro-ohms = <200>;
shunt-resistor-micro-ohms = <100>;
};
};
i2c1mux0ch5: i2c@5 {
@ -593,8 +533,6 @@
reg = <0x20>;
gpio-controller;
#gpio-cells = <2>;
interrupt-parent = <&gpio0>;
interrupts = <ASPEED_GPIO(B, 4) IRQ_TYPE_LEVEL_LOW>;
};
// Module 1 IOEXP
@ -603,8 +541,6 @@
reg = <0x21>;
gpio-controller;
#gpio-cells = <2>;
interrupt-parent = <&gpio0>;
interrupts = <ASPEED_GPIO(B, 4) IRQ_TYPE_LEVEL_LOW>;
};
// HMC IOEXP
@ -613,8 +549,6 @@
reg = <0x27>;
gpio-controller;
#gpio-cells = <2>;
interrupt-parent = <&gpio0>;
interrupts = <ASPEED_GPIO(B, 4) IRQ_TYPE_LEVEL_LOW>;
};
// Module 0 EEPROM
@ -640,6 +574,81 @@
&i2c5 {
status = "okay";
i2c-mux@70 {
compatible = "nxp,pca9548";
reg = <0x70>;
#address-cells = <1>;
#size-cells = <0>;
i2c-mux-idle-disconnect;
i2c5mux0ch0: i2c@0 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
};
i2c5mux0ch1: i2c@1 {
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
};
i2c5mux0ch2: i2c@2 {
#address-cells = <1>;
#size-cells = <0>;
reg = <2>;
};
i2c5mux0ch3: i2c@3 {
#address-cells = <1>;
#size-cells = <0>;
reg = <3>;
};
i2c5mux0ch4: i2c@4 {
#address-cells = <1>;
#size-cells = <0>;
reg = <4>;
};
i2c5mux0ch5: i2c@5 {
#address-cells = <1>;
#size-cells = <0>;
reg = <5>;
};
i2c5mux0ch6: i2c@6 {
#address-cells = <1>;
#size-cells = <0>;
reg = <6>;
// HDD FRU EEPROM
eeprom@52 {
compatible = "atmel,24c64";
reg = <0x52>;
};
};
i2c5mux0ch7: i2c@7 {
#address-cells = <1>;
#size-cells = <0>;
reg = <7>;
power-sensor@40 {
compatible = "ti,ina230";
reg = <0x40>;
shunt-resistor = <2000>;
};
power-sensor@41 {
compatible = "ti,ina230";
reg = <0x41>;
shunt-resistor = <2000>;
};
power-sensor@44 {
compatible = "ti,ina230";
reg = <0x44>;
shunt-resistor = <2000>;
};
power-sensor@45 {
compatible = "ti,ina230";
reg = <0x45>;
shunt-resistor = <2000>;
};
};
};
};
&i2c6 {
@ -834,9 +843,9 @@
};
// OCP NIC1 FRU EEPROM
eeprom@50 {
eeprom@52 {
compatible = "atmel,24c64";
reg = <0x50>;
reg = <0x52>;
};
};

View File

@ -135,10 +135,6 @@
use-ncsi;
};
&rtc {
status = "okay";
};
&fmc {
status = "okay";
@ -397,12 +393,6 @@
reg = <0x31>;
gpio-controller;
#gpio-cells = <2>;
gpio-line-names =
"","","","",
"","","presence-cmm","",
"","","","",
"","","","";
};
// PTTV FRU
@ -426,12 +416,6 @@
reg = <0x31>;
gpio-controller;
#gpio-cells = <2>;
gpio-line-names =
"","","","",
"","","presence-cmm","",
"","","","",
"","","","";
};
// Aegis FRU
@ -506,6 +490,11 @@
#address-cells = <1>;
#size-cells = <0>;
reg = <3>;
rtc@51 {
compatible = "nxp,pcf8563";
reg = <0x51>;
};
};
};
};
@ -565,7 +554,7 @@
/*B0-B7*/ "","","","",
"bmc-spi-mux-select-0","led-identify","","",
/*C0-C7*/ "reset-cause-platrst","","","","",
"cpu0-err-alert","","",
"power-hsc-good","power-chassis-good","",
/*D0-D7*/ "","","sol-uart-select","","","","","",
/*E0-E7*/ "","","","","","","","",
/*F0-F7*/ "","","","","","","","",
@ -584,14 +573,16 @@
/*O0-O7*/ "","","","","","","","",
/*P0-P7*/ "power-button","power-host-control",
"reset-button","","led-power","","","",
/*Q0-Q7*/ "","","","","","power-chassis-control","","",
/*Q0-Q7*/
"","","","",
"","power-chassis-control","","uart-switch-button",
/*R0-R7*/ "","","","","","","","",
/*S0-S7*/ "","","","","","","","",
/*T0-T7*/ "","","","","","","","",
/*U0-U7*/ "","","","","","","led-identify-gate","",
/*V0-V7*/ "","","","",
"rtc-battery-voltage-read-enable","",
"power-chassis-good","",
"","",
/*W0-W7*/ "","","","","","","","",
/*X0-X7*/ "","","","","","","","",
/*Y0-Y7*/ "","","","","","","","",
@ -672,7 +663,7 @@
"presence-asic-modules-0","rt-cpu0-p1-force-enable",
"presence-asic-modules-1","bios-debug-msg-disable",
"","uart-control-buffer-select",
"","ac-control-n",
"presence-cmm","ac-control-n",
/*G0-G3 line 96-103*/
"FM_CPU_CORETYPE2","",
"FM_CPU_CORETYPE1","",
@ -684,7 +675,7 @@
"FM_BOARD_REV_ID2","",
"FM_BOARD_REV_ID1","",
/*H0-H3 line 112-119*/
"FM_BOARD_REV_ID0","",
"FM_BOARD_REV_ID0","reset-control-cmos-clear",
"","","","","","",
/*H4-H7 line 120-127*/
"","",
@ -699,7 +690,7 @@
/*I4-I7 line 136-143*/
"","","","","","","","",
/*J0-J3 line 144-151*/
"","","","","","","","",
"","","power-card-enable","","","","","",
/*J4-J7 line 152-159*/
"SLOT_ID_BCB_0","",
"SLOT_ID_BCB_1","",
@ -715,9 +706,15 @@
"cpu0-thermtrip-alert","",
"reset-cause-pcie","",
/*L4-L7 line 184-191*/
"pvdd11-ocp-alert","","","","","","","",
"pvdd11-ocp-alert","",
"power-fault-n","",
"asic0-card-type-detection0-n","",
"asic0-card-type-detection1-n","",
/*M0-M3 line 192-199*/
"","","","","","","","",
"asic0-card-type-detection2-n","",
"uart-switch-lsb","",
"uart-switch-msb","",
"","",
/*M4-M7 line 200-207*/
"","","","","","","","",
/*N0-N3 line 208-215*/

File diff suppressed because it is too large Load Diff

File diff suppressed because it is too large Load Diff

View File

@ -207,7 +207,8 @@
/*F0-F7*/ "","","rtc-battery-voltage-read-enable","reset-cause-pinhole","","",
"factory-reset-toggle","",
/*G0-G7*/ "","","","","","","","",
/*H0-H7*/ "","bmc-ingraham0","rear-enc-id0","rear-enc-fault0","","","","",
/*H0-H7*/ "","led-bmc-ingraham0","led-rear-enc-id0","led-rear-enc-fault0","","","",
"",
/*I0-I7*/ "","","","","","","bmc-secure-boot","",
/*J0-J7*/ "","","","","","","","",
/*K0-K7*/ "","","","","","","","",
@ -215,7 +216,7 @@
/*M0-M7*/ "","","","","","","","",
/*N0-N7*/ "","","","","","","","",
/*O0-O7*/ "","","","usb-power","","","","",
/*P0-P7*/ "","","","","pcieslot-power","","","",
/*P0-P7*/ "","","","","led-pcieslot-power","","","",
/*Q0-Q7*/ "cfam-reset","","regulator-standby-faulted","","","","","",
/*R0-R7*/ "bmc-tpm-reset","power-chassis-control","power-chassis-good","","","","",
"",
@ -739,7 +740,7 @@
type = <PCA955X_TYPE_LED>;
};
led@10 {
led@a {
reg = <10>;
default-state = "keep";
label = "ddimm10";
@ -747,7 +748,7 @@
type = <PCA955X_TYPE_LED>;
};
led@11 {
led@b {
reg = <11>;
default-state = "keep";
label = "ddimm11";
@ -755,7 +756,7 @@
type = <PCA955X_TYPE_LED>;
};
led@12 {
led@c {
reg = <12>;
default-state = "keep";
label = "ddimm12";
@ -763,7 +764,7 @@
type = <PCA955X_TYPE_LED>;
};
led@13 {
led@d {
reg = <13>;
default-state = "keep";
label = "ddimm13";
@ -771,7 +772,7 @@
type = <PCA955X_TYPE_LED>;
};
led@14 {
led@e {
reg = <14>;
default-state = "keep";
label = "ddimm14";
@ -779,7 +780,7 @@
type = <PCA955X_TYPE_LED>;
};
led@15 {
led@f {
reg = <15>;
default-state = "keep";
label = "ddimm15";
@ -876,7 +877,7 @@
type = <PCA955X_TYPE_LED>;
};
led@10 {
led@a {
reg = <10>;
default-state = "keep";
label = "ddimm26";
@ -884,7 +885,7 @@
type = <PCA955X_TYPE_LED>;
};
led@11 {
led@b {
reg = <11>;
default-state = "keep";
label = "ddimm27";
@ -892,7 +893,7 @@
type = <PCA955X_TYPE_LED>;
};
led@12 {
led@c {
reg = <12>;
default-state = "keep";
label = "ddimm28";
@ -900,7 +901,7 @@
type = <PCA955X_TYPE_LED>;
};
led@13 {
led@d {
reg = <13>;
default-state = "keep";
label = "ddimm29";
@ -908,7 +909,7 @@
type = <PCA955X_TYPE_LED>;
};
led@14 {
led@e {
reg = <14>;
default-state = "keep";
label = "ddimm30";
@ -916,7 +917,7 @@
type = <PCA955X_TYPE_LED>;
};
led@15 {
led@f {
reg = <15>;
default-state = "keep";
label = "ddimm31";
@ -1005,7 +1006,7 @@
type = <PCA955X_TYPE_LED>;
};
led@10 {
led@a {
reg = <10>;
default-state = "keep";
label = "pcieslot7";
@ -1013,7 +1014,7 @@
type = <PCA955X_TYPE_LED>;
};
led@11 {
led@b {
reg = <11>;
default-state = "keep";
label = "pcieslot8";
@ -1021,7 +1022,7 @@
type = <PCA955X_TYPE_LED>;
};
led@12 {
led@c {
reg = <12>;
default-state = "keep";
label = "pcieslot9";
@ -1029,7 +1030,7 @@
type = <PCA955X_TYPE_LED>;
};
led@13 {
led@d {
reg = <13>;
default-state = "keep";
label = "pcieslot10";
@ -1037,7 +1038,7 @@
type = <PCA955X_TYPE_LED>;
};
led@14 {
led@e {
reg = <14>;
default-state = "keep";
label = "pcieslot11";
@ -1045,7 +1046,7 @@
type = <PCA955X_TYPE_LED>;
};
led@15 {
led@f {
reg = <15>;
default-state = "keep";
label = "tpm-wilson";
@ -1231,8 +1232,9 @@
#gpio-cells = <2>;
gpio-line-names =
"", "", "", "", "", "", "", "",
"", "", "", "", "", "", "power-config-full-load", "";
"", "", "", "", "", "", "P10_DCM0_PRES", "P10_DCM1_PRES",
"", "", "", "", "PRESENT_VRM_DCM0_N", "PRESENT_VRM_DCM1_N",
"power-config-full-load", "";
};
led-controller@61 {

View File

@ -353,6 +353,33 @@
"presence-base-op",
"";
};
led-controller@63 {
compatible = "nxp,pca9552";
reg = <0x63>;
#address-cells = <1>;
#size-cells = <0>;
gpio-controller;
#gpio-cells = <2>;
gpio-line-names =
"presence-vrm-c12",
"presence-vrm-c13",
"presence-vrm-c15",
"presence-vrm-c16",
"presence-vrm-c17",
"presence-vrm-c18",
"presence-vrm-c20",
"presence-vrm-c21",
"presence-vrm-c54",
"presence-vrm-c55",
"presence-vrm-c57",
"presence-vrm-c58",
"presence-vrm-c59",
"presence-vrm-c60",
"presence-vrm-c62",
"presence-vrm-c63";
};
};
&i2c1 {

View File

@ -355,6 +355,33 @@
"presence-base-op",
"";
};
led-controller@63 {
compatible = "nxp,pca9552";
reg = <0x63>;
#address-cells = <1>;
#size-cells = <0>;
gpio-controller;
#gpio-cells = <2>;
gpio-line-names =
"presence-vrm-c12",
"presence-vrm-c13",
"presence-vrm-c15",
"presence-vrm-c16",
"presence-vrm-c17",
"presence-vrm-c18",
"presence-vrm-c20",
"presence-vrm-c21",
"presence-vrm-c54",
"presence-vrm-c55",
"presence-vrm-c57",
"presence-vrm-c58",
"presence-vrm-c59",
"presence-vrm-c60",
"presence-vrm-c62",
"presence-vrm-c63";
};
};
&i2c1 {
@ -949,7 +976,7 @@
type = <PCA955X_TYPE_LED>;
};
led@10 {
led@a {
reg = <10>;
default-state = "keep";
label = "pcieslot-c10";
@ -957,7 +984,7 @@
type = <PCA955X_TYPE_LED>;
};
led@11 {
led@b {
reg = <11>;
default-state = "keep";
label = "pcieslot-c11";
@ -1058,7 +1085,7 @@
type = <PCA955X_TYPE_LED>;
};
led@10 {
led@a {
reg = <10>;
default-state = "keep";
label = "ddimm10";
@ -1066,7 +1093,7 @@
type = <PCA955X_TYPE_LED>;
};
led@11 {
led@b {
reg = <11>;
default-state = "keep";
label = "ddimm11";
@ -1074,7 +1101,7 @@
type = <PCA955X_TYPE_LED>;
};
led@12 {
led@c {
reg = <12>;
default-state = "keep";
label = "ddimm12";
@ -1082,7 +1109,7 @@
type = <PCA955X_TYPE_LED>;
};
led@13 {
led@d {
reg = <13>;
default-state = "keep";
label = "ddimm13";
@ -1090,7 +1117,7 @@
type = <PCA955X_TYPE_LED>;
};
led@14 {
led@e {
reg = <14>;
default-state = "keep";
label = "ddimm14";
@ -1098,7 +1125,7 @@
type = <PCA955X_TYPE_LED>;
};
led@15 {
led@f {
reg = <15>;
default-state = "keep";
label = "ddimm15";
@ -1195,7 +1222,7 @@
type = <PCA955X_TYPE_LED>;
};
led@10 {
led@a {
reg = <10>;
default-state = "keep";
label = "ddimm26";
@ -1203,7 +1230,7 @@
type = <PCA955X_TYPE_LED>;
};
led@11 {
led@b {
reg = <11>;
default-state = "keep";
label = "ddimm27";
@ -1211,7 +1238,7 @@
type = <PCA955X_TYPE_LED>;
};
led@12 {
led@c {
reg = <12>;
default-state = "keep";
label = "ddimm28";
@ -1219,7 +1246,7 @@
type = <PCA955X_TYPE_LED>;
};
led@13 {
led@d {
reg = <13>;
default-state = "keep";
label = "ddimm29";
@ -1227,7 +1254,7 @@
type = <PCA955X_TYPE_LED>;
};
led@14 {
led@e {
reg = <14>;
default-state = "keep";
label = "ddimm30";
@ -1235,7 +1262,7 @@
type = <PCA955X_TYPE_LED>;
};
led@15 {
led@f {
reg = <15>;
default-state = "keep";
label = "ddimm31";
@ -1332,7 +1359,7 @@
type = <PCA955X_TYPE_LED>;
};
led@10 {
led@a {
reg = <10>;
default-state = "keep";
label = "ddimm42";
@ -1340,7 +1367,7 @@
type = <PCA955X_TYPE_LED>;
};
led@11 {
led@b {
reg = <11>;
default-state = "keep";
label = "ddimm43";
@ -1348,7 +1375,7 @@
type = <PCA955X_TYPE_LED>;
};
led@12 {
led@c {
reg = <12>;
default-state = "keep";
label = "ddimm44";
@ -1356,7 +1383,7 @@
type = <PCA955X_TYPE_LED>;
};
led@13 {
led@d {
reg = <13>;
default-state = "keep";
label = "ddimm45";
@ -1364,7 +1391,7 @@
type = <PCA955X_TYPE_LED>;
};
led@14 {
led@e {
reg = <14>;
default-state = "keep";
label = "ddimm46";
@ -1372,7 +1399,7 @@
type = <PCA955X_TYPE_LED>;
};
led@15 {
led@f {
reg = <15>;
default-state = "keep";
label = "ddimm47";
@ -1469,7 +1496,7 @@
type = <PCA955X_TYPE_LED>;
};
led@10 {
led@a {
reg = <10>;
default-state = "keep";
label = "ddimm58";
@ -1477,7 +1504,7 @@
type = <PCA955X_TYPE_LED>;
};
led@11 {
led@b {
reg = <11>;
default-state = "keep";
label = "ddimm59";
@ -1485,7 +1512,7 @@
type = <PCA955X_TYPE_LED>;
};
led@12 {
led@c {
reg = <12>;
default-state = "keep";
label = "ddimm60";
@ -1493,7 +1520,7 @@
type = <PCA955X_TYPE_LED>;
};
led@13 {
led@d {
reg = <13>;
default-state = "keep";
label = "ddimm61";
@ -1501,7 +1528,7 @@
type = <PCA955X_TYPE_LED>;
};
led@14 {
led@e {
reg = <14>;
default-state = "keep";
label = "ddimm62";
@ -1509,7 +1536,7 @@
type = <PCA955X_TYPE_LED>;
};
led@15 {
led@f {
reg = <15>;
default-state = "keep";
label = "ddimm63";
@ -1598,7 +1625,7 @@
type = <PCA955X_TYPE_LED>;
};
led@10 {
led@a {
reg = <10>;
default-state = "keep";
label = "vrm6";
@ -1606,7 +1633,7 @@
type = <PCA955X_TYPE_LED>;
};
led@11 {
led@b {
reg = <11>;
default-state = "keep";
label = "vrm7";
@ -1614,7 +1641,7 @@
type = <PCA955X_TYPE_LED>;
};
led@12 {
led@c {
reg = <12>;
default-state = "keep";
label = "vrm12";
@ -1622,7 +1649,7 @@
type = <PCA955X_TYPE_LED>;
};
led@13 {
led@d {
reg = <13>;
default-state = "keep";
label = "vrm13";
@ -1630,7 +1657,7 @@
type = <PCA955X_TYPE_LED>;
};
led@14 {
led@e {
reg = <14>;
default-state = "keep";
label = "vrm14";
@ -1638,7 +1665,7 @@
type = <PCA955X_TYPE_LED>;
};
led@15 {
led@f {
reg = <15>;
default-state = "keep";
label = "vrm15";
@ -1727,7 +1754,7 @@
type = <PCA955X_TYPE_LED>;
};
led@10 {
led@a {
reg = <10>;
default-state = "keep";
label = "vrm2";
@ -1735,7 +1762,7 @@
type = <PCA955X_TYPE_LED>;
};
led@11 {
led@b {
reg = <11>;
default-state = "keep";
label = "vrm3";
@ -1743,7 +1770,7 @@
type = <PCA955X_TYPE_LED>;
};
led@12 {
led@c {
reg = <12>;
default-state = "keep";
label = "vrm8";
@ -1751,7 +1778,7 @@
type = <PCA955X_TYPE_LED>;
};
led@13 {
led@d {
reg = <13>;
default-state = "keep";
label = "vrm9";
@ -1759,7 +1786,7 @@
type = <PCA955X_TYPE_LED>;
};
led@14 {
led@e {
reg = <14>;
default-state = "keep";
label = "vrm10";
@ -1767,7 +1794,7 @@
type = <PCA955X_TYPE_LED>;
};
led@15 {
led@f {
reg = <15>;
default-state = "keep";
label = "vrm11";
@ -2118,7 +2145,7 @@
type = <PCA955X_TYPE_LED>;
};
led@10 {
led@a {
reg = <10>;
default-state = "keep";
label = "fan0";
@ -2126,7 +2153,7 @@
type = <PCA955X_TYPE_LED>;
};
led@11 {
led@b {
reg = <11>;
default-state = "keep";
label = "fan1";
@ -2134,7 +2161,7 @@
type = <PCA955X_TYPE_LED>;
};
led@12 {
led@c {
reg = <12>;
default-state = "keep";
label = "fan2";
@ -2142,7 +2169,7 @@
type = <PCA955X_TYPE_LED>;
};
led@13 {
led@d {
reg = <13>;
default-state = "keep";
label = "fan3";

View File

@ -109,22 +109,22 @@
compatible = "gpio-leds";
/* BMC Card fault LED at the back */
bmc-ingraham0 {
led-bmc-ingraham0 {
gpios = <&gpio0 ASPEED_GPIO(H, 1) GPIO_ACTIVE_LOW>;
};
/* Enclosure ID LED at the back */
rear-enc-id0 {
led-rear-enc-id0 {
gpios = <&gpio0 ASPEED_GPIO(H, 2) GPIO_ACTIVE_LOW>;
};
/* Enclosure fault LED at the back */
rear-enc-fault0 {
led-rear-enc-fault0 {
gpios = <&gpio0 ASPEED_GPIO(H, 3) GPIO_ACTIVE_LOW>;
};
/* PCIE slot power LED */
pcieslot-power {
led-pcieslot-power {
gpios = <&gpio0 ASPEED_GPIO(P, 4) GPIO_ACTIVE_LOW>;
};
};
@ -203,7 +203,7 @@
/*E0-E7*/ "","","","","","","","",
/*F0-F7*/ "","","rtc-battery-voltage-read-enable","reset-cause-pinhole","","","factory-reset-toggle","",
/*G0-G7*/ "","","","","","","","",
/*H0-H7*/ "","bmc-ingraham0","rear-enc-id0","rear-enc-fault0","","","","",
/*H0-H7*/ "","led-bmc-ingraham0","led-rear-enc-id0","led-rear-enc-fault0","","","","",
/*I0-I7*/ "","","","","","","bmc-secure-boot","",
/*J0-J7*/ "","","","","","","","",
/*K0-K7*/ "","","","","","","","",
@ -211,7 +211,7 @@
/*M0-M7*/ "","","","","","","","",
/*N0-N7*/ "","","","","","","","",
/*O0-O7*/ "","","","usb-power","","","","",
/*P0-P7*/ "","","","","pcieslot-power","","","",
/*P0-P7*/ "","","","","led-pcieslot-power","","","",
/*Q0-Q7*/ "cfam-reset","","regulator-standby-faulted","","","","","",
/*R0-R7*/ "bmc-tpm-reset","power-chassis-control","power-chassis-good","","","","","",
/*S0-S7*/ "presence-ps0","presence-ps1","presence-ps2","presence-ps3",
@ -1280,8 +1280,9 @@
#gpio-cells = <2>;
gpio-line-names =
"", "", "", "", "", "", "", "",
"", "", "", "", "", "", "power-config-full-load", "";
"", "", "", "", "", "", "P10_DCM0_PRES", "P10_DCM1_PRES",
"", "", "", "", "PRESENT_VRM_DCM0_N", "PRESENT_VRM_DCM1_N",
"power-config-full-load", "";
};
pca_pres2: pca9552@61 {

File diff suppressed because it is too large Load Diff

View File

@ -370,17 +370,17 @@
/*K0-K7*/ "","","","","","","","",
/*L0-L7*/ "","","","","","","","bmc-ready",
/*M0-M7*/ "","","","","","","","",
/*N0-N7*/ "","","","","","","","",
/*N0-N7*/ "fpga-debug-enable","","","","","","","",
/*O0-O7*/ "","","","","","","","",
/*P0-P7*/ "","","","","","","","bmc-hb",
/*Q0-Q7*/ "","","","","","","","",
/*Q0-Q7*/ "","","","","","","pch-ready","",
/*R0-R7*/ "","","","","","","","",
/*S0-S7*/ "","","","","","","rear-enc-fault0","rear-enc-id0",
/*T0-T7*/ "","","","","","","","",
/*U0-U7*/ "","","","","","","","",
/*V0-V7*/ "","rtc-battery-voltage-read-enable","","power-chassis-control","","","","",
/*W0-W7*/ "","","","","","","","",
/*X0-X7*/ "","power-chassis-good","","","","","","",
/*X0-X7*/ "fpga-pgood","power-chassis-good","pch-pgood","","","","","",
/*Y0-Y7*/ "","","","","","","","",
/*Z0-Z7*/ "","","","","","","","";
};
@ -398,6 +398,12 @@
clk-phase-mmc-hs200 = <180>, <180>;
};
&sgpiom0 {
status = "okay";
ngpios = <128>;
bus-frequency = <1000000>;
};
&ibt {
status = "okay";
};
@ -464,6 +470,15 @@
aspeed,lpc-interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
};
&peci0 {
status = "okay";
};
&lpc_snoop {
status = "okay";
snoop-ports = <0x80>, <0x81>;
};
&i2c0 {
status = "okay";
@ -666,22 +681,22 @@
status = "okay";
power-supply@58 {
compatible = "ibm,cffps";
compatible = "intel,crps185";
reg = <0x58>;
};
power-supply@59 {
compatible = "ibm,cffps";
compatible = "intel,crps185";
reg = <0x59>;
};
power-supply@5a {
compatible = "ibm,cffps";
compatible = "intel,crps185";
reg = <0x5a>;
};
power-supply@5b {
compatible = "ibm,cffps";
compatible = "intel,crps185";
reg = <0x5b>;
};
};
@ -1007,6 +1022,7 @@
&i2c8 {
status = "okay";
bus-frequency = <400000>;
i2c-mux@71 {
compatible = "nxp,pca9548";
@ -1468,6 +1484,7 @@
&i2c15 {
status = "okay";
bus-frequency = <400000>;
i2c-mux@71 {
compatible = "nxp,pca9548";

View File

@ -381,7 +381,7 @@
#size-cells = <0>;
reg = <5>;
U190_fru@51 {
eeprom@51 {
compatible = "atmel,24c128";
reg = <0x51>;
pagesize = <32>;
@ -460,7 +460,7 @@
status = "okay";
/* MB FRU (U173) @ 0xA2 */
mb_fru: mb_fru@51 {
mb_fru: eeprom@51 {
compatible = "atmel,24c128";
reg = <0x51>;
pagesize = <32>;
@ -472,7 +472,7 @@
reg = <0x4a>;
};
FP_U4_fru@52 {
eeprom@52 {
compatible = "atmel,24c02";
reg = <0x52>;
pagesize = <16>;
@ -593,7 +593,7 @@
status = "okay";
/* SCM FRU (U19) @ 0xA2 */
scm_fru: scm_fru@51 {
scm_fru: eeprom@51 {
compatible = "atmel,24c128";
reg = <0x51>;
pagesize = <32>;

View File

@ -154,7 +154,7 @@
#address-cells = <1>;
#size-cells = <0>;
reg = <7>;
at24@50 {
eeprom@50 {
compatible = "atmel,24c64";
reg = <0x50>;
pagesize = <32>;
@ -196,7 +196,7 @@
#address-cells = <1>;
#size-cells = <0>;
reg = <7>;
at24@50 {
eeprom@50 {
compatible = "atmel,24c64";
reg = <0x50>;
pagesize = <32>;
@ -205,7 +205,7 @@
};
};
};
at24@50 {
eeprom@50 {
compatible = "atmel,24c64";
reg = <0x50>;
pagesize = <32>;

View File

@ -291,7 +291,7 @@
/* SMB_BMC_MGMT_LVC3 */
status = "okay";
at24@50 {
eeprom@50 {
compatible = "atmel,24c64";
reg = <0x50>;
pagesize = <32>;

View File

@ -36,6 +36,7 @@ dtb-$(CONFIG_ARCH_BCM2835) += \
bcm2835-rpi-zero.dtb \
bcm2835-rpi-zero-w.dtb
dtb-$(CONFIG_ARCH_BCMBCA) += \
bcm6846-genexis-xg6846b.dtb \
bcm947622.dtb \
bcm963138.dtb \
bcm963138dvt.dtb \

View File

@ -59,6 +59,9 @@
&gmac0 {
status = "okay";
nvmem-cells = <&macaddr_board_config_66>;
nvmem-cell-names = "mac-address";
};
&gmac1 {
@ -102,8 +105,25 @@
};
partition@800000 {
compatible = "linux,ubi";
label = "ubi";
reg = <0x800000 0x7780000>;
volumes {
ubi-volume-board-config {
volname = "board-config";
nvmem-layout {
compatible = "fixed-layout";
#address-cells = <1>;
#size-cells = <1>;
macaddr_board_config_66: macaddr@66 {
reg = <0x66 0x6>;
};
};
};
};
};
};
};

View File

@ -32,7 +32,6 @@
&qspi {
status = "okay";
bspi-sel = <0>;
flash: flash@0 {
compatible = "m25p80";

View File

@ -0,0 +1,244 @@
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright 2024 Linus Walleij <linus.walleij@linaro.org>
*/
/dts-v1/;
#include "bcm6846.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/leds/common.h>
/ {
model = "Genexis XG6846B Ethernet layer 2/3 router";
compatible = "genexis,xg6846b", "brcm,bcm6846", "brcm,bcmbca";
aliases {
serial0 = &uart0;
};
chosen {
stdout-path = "serial0:115200n8";
};
/* Micron D9PTK 256 MB RAM */
memory@0 {
device_type = "memory";
reg = <0x0 0x10000000>;
};
reserved-memory {
#address-cells = <1>;
#size-cells = <1>;
ranges;
secondary-boot@0 {
no-map;
reg = <0x00000000 0x00008000>;
};
pmc3-firmware@8000 {
no-map;
reg = <0x00008000 0x00100000>;
};
};
gpio-keys {
compatible = "gpio-keys-polled";
poll-interval = <20000>;
/* Called "canyon rescue button" in the vendor DTB */
button-restart {
label = "Reset";
linux,code = <KEY_RESTART>;
gpios = <&gpio0 41 GPIO_ACTIVE_LOW>;
};
};
};
&gpio0 {
status = "okay";
};
&gpio1 {
status = "okay";
};
&gpio2 {
status = "okay";
/* Totally 79 GPIOs are available */
ngpios = <15>;
};
&uart0 {
status = "okay";
};
&leds {
status = "okay";
brcm,serial-shift-bits = <16>;
led@0 {
reg = <0>;
active-low;
function = "ext";
color = <LED_COLOR_ID_GREEN>;
};
led@1 {
reg = <1>;
active-low;
function = "ext";
color = <LED_COLOR_ID_AMBER>;
};
led@3 {
reg = <3>;
active-low;
function = LED_FUNCTION_WAN;
color = <LED_COLOR_ID_AMBER>;
};
led@4 {
reg = <4>;
active-low;
function = LED_FUNCTION_WAN;
color = <LED_COLOR_ID_GREEN>;
};
led@5 {
reg = <5>;
active-low;
function = LED_FUNCTION_POWER;
color = <LED_COLOR_ID_GREEN>;
};
led@6 {
reg = <6>;
active-low;
function = LED_FUNCTION_POWER;
color = <LED_COLOR_ID_RED>;
};
led@15 {
reg = <15>;
active-low;
function = LED_FUNCTION_USB;
color = <LED_COLOR_ID_GREEN>;
};
led@7 {
/* Activity 03 */
reg = <7>;
active-low;
function = "lan1";
color = <LED_COLOR_ID_AMBER>;
};
led@8 {
/* Activity 04 */
reg = <8>;
active-low;
function = "lan1";
color = <LED_COLOR_ID_GREEN>;
};
led@9 {
/* Activity 03 */
reg = <9>;
active-low;
function = "lan2";
color = <LED_COLOR_ID_AMBER>;
};
led@10 {
/* Activity 04 */
reg = <10>;
active-low;
function = "lan2";
color = <LED_COLOR_ID_GREEN>;
};
led@11 {
/* Activity 03 */
reg = <11>;
active-low;
function = "lan3";
color = <LED_COLOR_ID_AMBER>;
};
led@12 {
/* Activity 04 */
reg = <12>;
active-low;
function = "lan3";
color = <LED_COLOR_ID_GREEN>;
};
led@13 {
/* Activity 03 */
reg = <13>;
active-low;
function = "lan4";
color = <LED_COLOR_ID_AMBER>;
};
led@14 {
/* Activity 04 */
reg = <14>;
active-low;
function = "lan4";
color = <LED_COLOR_ID_GREEN>;
};
};
&hsspi {
status = "okay";
};
&nand_controller {
brcm,wp-not-connected;
status = "okay";
};
&nandcs {
nand-on-flash-bbt;
brcm,nand-ecc-use-strap;
/* Winbond W29N02GV, 256MB with 128KB erase blocks */
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
loader@0 {
label = "loader";
reg = <0x00000000 0x00400000>;
};
image@400000 {
label = "image";
reg = <0x00400000 0x0fb00000>;
};
/* 0x00ff0000-0x00ffffff: bad block list */
};
};
&mdio {
status = "okay";
phy1: ethernet-phy@1 {
reg = <1>;
};
phy2: ethernet-phy@2 {
reg = <2>;
};
phy3: ethernet-phy@3 {
reg = <3>;
};
phy4: ethernet-phy@4 {
reg = <4>;
};
phy21: ethernet-phy@21 {
reg = <21>;
};
};

View File

@ -99,6 +99,91 @@
#size-cells = <1>;
ranges = <0 0xff800000 0x800000>;
watchdog@480 {
compatible = "brcm,bcm6345-wdt";
reg = <0x480 0x10>;
};
/* GPIOs 0 .. 31 */
gpio0: gpio@500 {
compatible = "brcm,bcm6345-gpio";
reg = <0x500 0x04>, <0x520 0x04>;
reg-names = "dirout", "dat";
gpio-controller;
#gpio-cells = <2>;
status = "disabled";
};
/* GPIOs 32 .. 63 */
gpio1: gpio@504 {
compatible = "brcm,bcm6345-gpio";
reg = <0x504 0x04>, <0x524 0x04>;
reg-names = "dirout", "dat";
gpio-controller;
#gpio-cells = <2>;
status = "disabled";
};
/* GPIOs 64 .. 95 */
gpio2: gpio@508 {
compatible = "brcm,bcm6345-gpio";
reg = <0x508 0x04>, <0x528 0x04>;
reg-names = "dirout", "dat";
gpio-controller;
#gpio-cells = <2>;
status = "disabled";
};
/* GPIOs 96 .. 127 */
gpio3: gpio@50c {
compatible = "brcm,bcm6345-gpio";
reg = <0x50c 0x04>, <0x52c 0x04>;
reg-names = "dirout", "dat";
gpio-controller;
#gpio-cells = <2>;
status = "disabled";
};
/* GPIOs 128 .. 159 */
gpio4: gpio@510 {
compatible = "brcm,bcm6345-gpio";
reg = <0x510 0x04>, <0x530 0x04>;
reg-names = "dirout", "dat";
gpio-controller;
#gpio-cells = <2>;
status = "disabled";
};
/* GPIOs 160 .. 191 */
gpio5: gpio@514 {
compatible = "brcm,bcm6345-gpio";
reg = <0x514 0x04>, <0x534 0x04>;
reg-names = "dirout", "dat";
gpio-controller;
#gpio-cells = <2>;
status = "disabled";
};
/* GPIOs 192 .. 223 */
gpio6: gpio@518 {
compatible = "brcm,bcm6345-gpio";
reg = <0x518 0x04>, <0x538 0x04>;
reg-names = "dirout", "dat";
gpio-controller;
#gpio-cells = <2>;
status = "disabled";
};
/* GPIOs 224 .. 255 */
gpio7: gpio@51c {
compatible = "brcm,bcm6345-gpio";
reg = <0x51c 0x04>, <0x53c 0x04>;
reg-names = "dirout", "dat";
gpio-controller;
#gpio-cells = <2>;
status = "disabled";
};
uart0: serial@640 {
compatible = "brcm,bcm6345-uart";
reg = <0x640 0x1b>;
@ -108,6 +193,19 @@
status = "disabled";
};
rng@b80 {
compatible = "brcm,iproc-rng200";
reg = <0xb80 0x28>;
};
leds: led-controller@800 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "brcm,bcm63138-leds";
reg = <0x800 0xdc>;
status = "disabled";
};
hsspi: spi@1000 {
#address-cells = <1>;
#size-cells = <0>;
@ -133,5 +231,27 @@
reg = <0>;
};
};
mdio: mdio@2060 {
compatible = "brcm,bcm6846-mdio";
reg = <0x02060 0x10>, <0x5a068 0x4>;
reg-names = "mdio", "mdio_indir_rw";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
pl081_dma: dma-controller@59000 {
compatible = "arm,pl081", "arm,primecell";
// The magic B105F00D info is missing
arm,primecell-periphid = <0x00041081>;
reg = <0x59000 0x1000>;
interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
memcpy-burst-size = <256>;
memcpy-bus-width = <32>;
clocks = <&periph_clk>;
clock-names = "apb_pclk";
#dma-cells = <2>;
};
};
};

View File

@ -74,7 +74,6 @@
&spi_nor {
status = "okay";
spi-max-frequency = <62500000>;
m25p,default-addr-width = <3>;
#address-cells = <1>;
#size-cells = <1>;

View File

@ -84,7 +84,6 @@
&spi_nor {
status = "okay";
spi-max-frequency = <62500000>;
m25p,default-addr-width = <3>;
#address-cells = <1>;
#size-cells = <1>;

View File

@ -135,7 +135,6 @@
&qspi {
status = "okay";
bspi-sel = <0>;
flash: flash@0 {
#address-cells = <1>;
#size-cells = <1>;

View File

@ -135,7 +135,6 @@
&qspi {
status = "okay";
bspi-sel = <0>;
flash: flash@0 {
#address-cells = <1>;
#size-cells = <1>;

View File

@ -151,7 +151,6 @@
&qspi {
status = "okay";
bspi-sel = <0>;
flash: flash@0 {
#address-cells = <1>;
#size-cells = <1>;

View File

@ -139,7 +139,6 @@
&qspi {
status = "okay";
bspi-sel = <0>;
flash: flash@0 {
#address-cells = <1>;
#size-cells = <1>;

View File

@ -143,7 +143,6 @@
&qspi {
status = "okay";
bspi-sel = <0>;
flash: flash@0 {
#address-cells = <1>;
#size-cells = <1>;

View File

@ -150,7 +150,6 @@
&qspi {
status = "okay";
bspi-sel = <0>;
flash: flash@0 {
#address-cells = <1>;
#size-cells = <1>;

View File

@ -154,7 +154,6 @@
&qspi {
status = "okay";
bspi-sel = <0>;
flash: flash@0 {
#address-cells = <1>;
#size-cells = <1>;

View File

@ -139,7 +139,6 @@
&qspi {
status = "okay";
bspi-sel = <0>;
flash: flash@0 {
#address-cells = <1>;
#size-cells = <1>;

View File

@ -440,7 +440,7 @@
clocks = <&l4_mp_clk>, <&peri_emac_ptp_clk>;
clock-names = "stmmaceth", "ptp_ref";
resets = <&rst EMAC0_RESET>, <&rst EMAC0_OCP_RESET>;
reset-names = "stmmaceth", "ahb";
reset-names = "stmmaceth", "stmmaceth-ocp";
snps,axi-config = <&socfpga_axi_setup>;
status = "disabled";
};
@ -460,7 +460,7 @@
clocks = <&l4_mp_clk>, <&peri_emac_ptp_clk>;
clock-names = "stmmaceth", "ptp_ref";
resets = <&rst EMAC1_RESET>, <&rst EMAC1_OCP_RESET>;
reset-names = "stmmaceth", "ahb";
reset-names = "stmmaceth", "stmmaceth-ocp";
snps,axi-config = <&socfpga_axi_setup>;
status = "disabled";
};
@ -480,7 +480,7 @@
clocks = <&l4_mp_clk>, <&peri_emac_ptp_clk>;
clock-names = "stmmaceth", "ptp_ref";
resets = <&rst EMAC2_RESET>, <&rst EMAC2_OCP_RESET>;
reset-names = "stmmaceth", "ahb";
reset-names = "stmmaceth", "stmmaceth-ocp";
snps,axi-config = <&socfpga_axi_setup>;
status = "disabled";
};

View File

@ -50,8 +50,6 @@
stmpe1: stmpe811@41 {
compatible = "st,stmpe811";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x41>;
id = <0>;
blocks = <0x5>;

View File

@ -151,12 +151,6 @@
&spi0 {
status = "okay";
spidev@0 {
compatible = "rohm,dh2228fv";
reg = <0>;
spi-max-frequency = <1000000>;
};
};
&usb1 {

View File

@ -113,8 +113,8 @@
"Headphones", "HPOR",
"MIC2", "Mic Jack";
widgets = "Headphone", "Headphones", "Microphone", "Mic Jack";
hp-det-gpio = <&gpio 97 GPIO_ACTIVE_HIGH>;
mic-det-gpio = <&gpio 96 GPIO_ACTIVE_HIGH>;
hp-det-gpios = <&gpio 97 GPIO_ACTIVE_HIGH>;
mic-det-gpios = <&gpio 96 GPIO_ACTIVE_HIGH>;
};
soc {

View File

@ -308,7 +308,7 @@
clock-names = "spi", "wrap";
};
cir: cir@10013000 {
cir: ir-receiver@10013000 {
compatible = "mediatek,mt7623-cir";
reg = <0 0x10013000 0 0x1000>;
interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_LOW>;

View File

@ -12,6 +12,7 @@ DTC_FLAGS_at91-sama5d2_xplained := -@
DTC_FLAGS_at91-sama5d3_eds := -@
DTC_FLAGS_at91-sama5d3_xplained := -@
DTC_FLAGS_at91-sama5d4_xplained := -@
DTC_FLAGS_at91-sama7d65_curiosity := -@
DTC_FLAGS_at91-sama7g54_curiosity := -@
DTC_FLAGS_at91-sama7g5ek := -@
dtb-$(CONFIG_SOC_AT91RM9200) += \
@ -90,6 +91,8 @@ dtb-$(CONFIG_SOC_SAM_V7) += \
at91-sama5d4_xplained.dtb \
at91-sama5d4ek.dtb \
at91-vinco.dtb
dtb-$(CONFIG_SOC_SAMA7D65) += \
at91-sama7d65_curiosity.dtb
dtb-$(CONFIG_SOC_SAMA7G5) += \
at91-sama7g54_curiosity.dtb \
at91-sama7g5ek.dtb

View File

@ -88,8 +88,6 @@
};
&i2c6 {
#address-cells = <1>;
#size-cells = <0>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_flx6_default>;
i2c-analog-filter;
@ -200,6 +198,52 @@
};
};
&flx7 {
atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
status = "okay";
};
&i2c7 {
dmas = <0>, <0>;
i2c-analog-filter;
i2c-digital-filter;
i2c-digital-filter-width-ns = <35>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_flx7_default>;
status = "okay";
power-monitor@10 {
compatible = "microchip,pac1934";
reg = <0x10>;
#address-cells = <1>;
#size-cells = <0>;
channel@1 {
reg = <0x1>;
shunt-resistor-micro-ohms = <10000>;
label = "VDD3V3";
};
channel@2 {
reg = <0x2>;
shunt-resistor-micro-ohms = <10000>;
label = "DCDC4";
};
channel@3 {
reg = <0x3>;
shunt-resistor-micro-ohms = <10000>;
label = "VDDCORE";
};
channel@4 {
reg = <0x4>;
shunt-resistor-micro-ohms = <10000>;
label = "VDDIODDR";
};
};
};
&i2s {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2s_default>;
@ -233,6 +277,12 @@
<AT91_PIOA 24 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
<AT91_PIOA 25 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
};
pinctrl_flx7_default: flx7-default {
atmel,pins =
<AT91_PIOC 0 AT91_PERIPH_C AT91_PINCTRL_PULL_UP>,
<AT91_PIOC 1 AT91_PERIPH_C AT91_PINCTRL_PULL_UP>;
};
};
gpio-keys {

View File

@ -197,6 +197,7 @@
&sdmmc0 {
bus-width = <4>;
no-1-8-v;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_sdmmc0_default>;
status = "okay";

View File

@ -514,6 +514,7 @@
&sdmmc0 {
bus-width = <4>;
no-1-8-v;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_sdmmc0_default>;
disable-wp;

View File

@ -0,0 +1,89 @@
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* at91-sama7d65_curiosity.dts - Device Tree file for SAMA7D65 Curiosity board
*
* Copyright (c) 2024 Microchip Technology Inc. and its subsidiaries
*
* Author: Romain Sioen <romain.sioen@microchip.com>
*
*/
/dts-v1/;
#include "sama7d65-pinfunc.h"
#include "sama7d65.dtsi"
#include <dt-bindings/mfd/atmel-flexcom.h>
#include <dt-bindings/pinctrl/at91.h>
/ {
model = "Microchip SAMA7D65 Curiosity";
compatible = "microchip,sama7d65-curiosity", "microchip,sama7d65",
"microchip,sama7d6", "microchip,sama7";
aliases {
serial0 = &uart6;
};
chosen {
stdout-path = "serial0:115200n8";
};
memory@60000000 {
device_type = "memory";
reg = <0x60000000 0x40000000>;
};
};
&flx6 {
atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
status = "okay";
};
&uart6 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart6_default>;
status = "okay";
};
&main_xtal {
clock-frequency = <24000000>;
};
&pioa {
pinctrl_sdmmc1_default: sdmmc1-default {
cmd-data {
pinmux = <PIN_PB22__SDMMC1_CMD>,
<PIN_PB24__SDMMC1_DAT0>,
<PIN_PB25__SDMMC1_DAT1>,
<PIN_PB26__SDMMC1_DAT2>,
<PIN_PB27__SDMMC1_DAT3>;
slew-rate = <0>;
bias-disable;
};
ck-cd-rstn-vddsel {
pinmux = <PIN_PB23__SDMMC1_CK>,
<PIN_PB21__SDMMC1_RSTN>,
<PIN_PB30__SDMMC1_1V8SEL>,
<PIN_PB29__SDMMC1_CD>,
<PIN_PB28__SDMMC1_WP>;
slew-rate = <0>;
bias-disable;
};
};
pinctrl_uart6_default: uart6-default {
pinmux = <PIN_PD18__FLEXCOM6_IO0>,
<PIN_PD19__FLEXCOM6_IO1>;
bias-disable;
};
};
&sdmmc1 {
bus-width = <4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_sdmmc1_default>;
status = "okay";
};
&slow_xtal {
clock-frequency = <32768>;
};

View File

@ -197,6 +197,8 @@
compatible = "microchip,sam9x60-spi", "atmel,at91rm9200-spi";
reg = <0x400 0x200>;
interrupts = <13 IRQ_TYPE_LEVEL_HIGH 7>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 13>;
clock-names = "spi_clk";
dmas = <&dma0
@ -268,6 +270,8 @@
compatible = "microchip,sam9x60-spi", "atmel,at91rm9200-spi";
reg = <0x400 0x200>;
interrupts = <14 IRQ_TYPE_LEVEL_HIGH 7>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 14>;
clock-names = "spi_clk";
dmas = <&dma0
@ -768,6 +772,8 @@
compatible = "microchip,sam9x60-spi", "atmel,at91rm9200-spi";
reg = <0x400 0x200>;
interrupts = <5 IRQ_TYPE_LEVEL_HIGH 7>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 5>;
clock-names = "spi_clk";
dmas = <&dma0
@ -839,6 +845,8 @@
compatible = "microchip,sam9x60-spi", "atmel,at91rm9200-spi";
reg = <0x400 0x200>;
interrupts = <6 IRQ_TYPE_LEVEL_HIGH 7>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 6>;
clock-names = "spi_clk";
dmas = <&dma0
@ -910,6 +918,8 @@
compatible = "microchip,sam9x60-spi", "atmel,at91rm9200-spi";
reg = <0x400 0x200>;
interrupts = <7 IRQ_TYPE_LEVEL_HIGH 7>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 7>;
clock-names = "spi_clk";
dmas = <&dma0
@ -981,6 +991,8 @@
compatible = "microchip,sam9x60-spi", "atmel,at91rm9200-spi";
reg = <0x400 0x200>;
interrupts = <8 IRQ_TYPE_LEVEL_HIGH 7>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 8>;
clock-names = "spi_clk";
dmas = <&dma0

View File

@ -132,6 +132,8 @@
compatible = "microchip,sam9x7-spi", "atmel,at91rm9200-spi";
reg = <0x400 0x200>;
interrupts = <13 IRQ_TYPE_LEVEL_HIGH 7>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 13>;
clock-names = "spi_clk";
dmas = <&dma0
@ -151,6 +153,8 @@
compatible = "microchip,sam9x7-i2c", "microchip,sam9x60-i2c";
reg = <0x600 0x200>;
interrupts = <13 IRQ_TYPE_LEVEL_HIGH 7>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 13>;
dmas = <&dma0
(AT91_XDMAC_DT_MEM_IF(0) |
@ -201,6 +205,8 @@
compatible = "microchip,sam9x7-spi", "atmel,at91rm9200-spi";
reg = <0x400 0x200>;
interrupts = <14 IRQ_TYPE_LEVEL_HIGH 7>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 14>;
clock-names = "spi_clk";
dmas = <&dma0
@ -220,6 +226,8 @@
compatible = "microchip,sam9x7-i2c", "microchip,sam9x60-i2c";
reg = <0x600 0x200>;
interrupts = <14 IRQ_TYPE_LEVEL_HIGH 7>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 14>;
dmas = <&dma0
(AT91_XDMAC_DT_MEM_IF(0) |
@ -312,6 +320,8 @@
compatible = "microchip,sam9x7-i2c", "microchip,sam9x60-i2c";
reg = <0x600 0x200>;
interrupts = <32 IRQ_TYPE_LEVEL_HIGH 7>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 32>;
dmas = <&dma0
(AT91_XDMAC_DT_MEM_IF(0) |
@ -362,6 +372,8 @@
compatible = "microchip,sam9x7-i2c", "microchip,sam9x60-i2c";
reg = <0x600 0x200>;
interrupts = <33 IRQ_TYPE_LEVEL_HIGH 7>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 33>;
dmas = <&dma0
(AT91_XDMAC_DT_MEM_IF(0) |
@ -533,6 +545,8 @@
compatible = "microchip,sam9x7-i2c", "microchip,sam9x60-i2c";
reg = <0x600 0x200>;
interrupts = <9 IRQ_TYPE_LEVEL_HIGH 7>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 9>;
dmas = <&dma0
(AT91_XDMAC_DT_MEM_IF(0) |
@ -583,6 +597,8 @@
compatible = "microchip,sam9x7-i2c", "microchip,sam9x60-i2c";
reg = <0x600 0x200>;
interrupts = <10 IRQ_TYPE_LEVEL_HIGH 7>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 10>;
dmas = <&dma0
(AT91_XDMAC_DT_MEM_IF(0) |
@ -633,6 +649,8 @@
compatible = "microchip,sam9x7-i2c", "microchip,sam9x60-i2c";
reg = <0x600 0x200>;
interrupts = <11 IRQ_TYPE_LEVEL_HIGH 7>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 11>;
dmas = <&dma0
(AT91_XDMAC_DT_MEM_IF(0) |
@ -683,6 +701,8 @@
compatible = "microchip,sam9x7-spi", "atmel,at91rm9200-spi";
reg = <0x400 0x200>;
interrupts = <5 IRQ_TYPE_LEVEL_HIGH 7>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 5>;
clock-names = "spi_clk";
dmas = <&dma0
@ -702,6 +722,8 @@
compatible = "microchip,sam9x7-i2c", "microchip,sam9x60-i2c";
reg = <0x600 0x200>;
interrupts = <5 IRQ_TYPE_LEVEL_HIGH 7>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 5>;
dmas = <&dma0
(AT91_XDMAC_DT_MEM_IF(0) |
@ -752,6 +774,8 @@
compatible = "microchip,sam9x7-spi", "atmel,at91rm9200-spi";
reg = <0x400 0x200>;
interrupts = <6 IRQ_TYPE_LEVEL_HIGH 7>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 6>;
clock-names = "spi_clk";
dmas = <&dma0
@ -771,6 +795,8 @@
compatible = "microchip,sam9x7-i2c", "microchip,sam9x60-i2c";
reg = <0x600 0x200>;
interrupts = <6 IRQ_TYPE_LEVEL_HIGH 7>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 6>;
dmas = <&dma0
(AT91_XDMAC_DT_MEM_IF(0) |
@ -821,6 +847,8 @@
compatible = "microchip,sam9x7-spi", "atmel,at91rm9200-spi";
reg = <0x400 0x200>;
interrupts = <7 IRQ_TYPE_LEVEL_HIGH 7>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 7>;
clock-names = "spi_clk";
dmas = <&dma0
@ -840,6 +868,8 @@
compatible = "microchip,sam9x7-i2c", "microchip,sam9x60-i2c";
reg = <0x600 0x200>;
interrupts = <7 IRQ_TYPE_LEVEL_HIGH 7>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 7>;
dmas = <&dma0
(AT91_XDMAC_DT_MEM_IF(0) |
@ -890,6 +920,8 @@
compatible = "microchip,sam9x7-spi", "atmel,at91rm9200-spi";
reg = <0x400 0x200>;
interrupts = <8 IRQ_TYPE_LEVEL_HIGH 7>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 8>;
clock-names = "spi_clk";
dmas = <&dma0
@ -909,6 +941,8 @@
compatible = "microchip,sam9x7-i2c", "microchip,sam9x60-i2c";
reg = <0x600 0x200>;
interrupts = <8 IRQ_TYPE_LEVEL_HIGH 7>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 8>;
dmas = <&dma0
(AT91_XDMAC_DT_MEM_IF(0) |
@ -984,6 +1018,8 @@
compatible = "microchip,sam9x7-i2c", "microchip,sam9x60-i2c";
reg = <0x600 0x200>;
interrupts = <15 IRQ_TYPE_LEVEL_HIGH 7>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 15>;
dmas = <&dma0
(AT91_XDMAC_DT_MEM_IF(0) |
@ -1034,6 +1070,8 @@
compatible = "microchip,sam9x7-i2c", "microchip,sam9x60-i2c";
reg = <0x600 0x200>;
interrupts = <16 IRQ_TYPE_LEVEL_HIGH 7>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 16>;
dmas = <&dma0
(AT91_XDMAC_DT_MEM_IF(0) |

View File

@ -0,0 +1,947 @@
/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */
#define PINMUX_PIN(no, func, ioset) \
(((no) & 0xffff) | (((func) & 0xf) << 16) | (((ioset) & 0xff) << 20))
#define PIN_PA0 0
#define PIN_PA0__GPIO PINMUX_PIN(PIN_PA0, 0, 0)
#define PIN_PA0__SDMMC0_CK PINMUX_PIN(PIN_PA0, 1, 1)
#define PIN_PA0__FLEXCOM3_IO0 PINMUX_PIN(PIN_PA0, 2, 1)
#define PIN_PA0__NWER0 PINMUX_PIN(PIN_PA0, 3, 1)
#define PIN_PA1 1
#define PIN_PA1__GPIO PINMUX_PIN(PIN_PA1, 0, 0)
#define PIN_PA1__SDMMC0_CMD PINMUX_PIN(PIN_PA1, 1, 1)
#define PIN_PA1__FLEXCOM3_IO1 PINMUX_PIN(PIN_PA1, 2, 1)
#define PIN_PA1__A21 PINMUX_PIN(PIN_PA1, 3, 1)
#define PIN_PA2 2
#define PIN_PA2__GPIO PINMUX_PIN(PIN_PA2, 0, 0)
#define PIN_PA2__SDMMC0_RSTN PINMUX_PIN(PIN_PA2, 1, 1)
#define PIN_PA2__FLEXCOM3_IO2 PINMUX_PIN(PIN_PA2, 2, 1)
#define PIN_PA2__A22 PINMUX_PIN(PIN_PA2, 3, 1)
#define PIN_PA3 3
#define PIN_PA3__GPIO PINMUX_PIN(PIN_PA3, 0, 0)
#define PIN_PA3__SDMMC0_DAT0 PINMUX_PIN(PIN_PA3, 1, 1)
#define PIN_PA3__FLEXCOM3_IO3 PINMUX_PIN(PIN_PA3, 2, 1)
#define PIN_PA3__D0 PINMUX_PIN(PIN_PA3, 3, 1)
#define PIN_PA4 4
#define PIN_PA4__GPIO PINMUX_PIN(PIN_PA4, 0, 0)
#define PIN_PA4__SDMMC0_DAT1 PINMUX_PIN(PIN_PA4, 1, 1)
#define PIN_PA4__FLEXCOM3_IO4 PINMUX_PIN(PIN_PA4, 2, 1)
#define PIN_PA4__D1 PINMUX_PIN(PIN_PA4, 3, 1)
#define PIN_PA5 5
#define PIN_PA5__GPIO PINMUX_PIN(PIN_PA5, 0, 0)
#define PIN_PA5__SDMMC0_DAT4 PINMUX_PIN(PIN_PA5, 1, 1)
#define PIN_PA5__FLEXCOM2_IO0 PINMUX_PIN(PIN_PA5, 2, 3)
#define PIN_PA5__D4 PINMUX_PIN(PIN_PA5, 3, 1)
#define PIN_PA5__TCLK4 PINMUX_PIN(PIN_PA5, 6, 3)
#define PIN_PA6 6
#define PIN_PA6__GPIO PINMUX_PIN(PIN_PA6, 0, 0)
#define PIN_PA6__SDMMC0_DAT5 PINMUX_PIN(PIN_PA6, 1, 1)
#define PIN_PA6__FLEXCOM2_IO1 PINMUX_PIN(PIN_PA6, 2, 3)
#define PIN_PA6__D5 PINMUX_PIN(PIN_PA6, 3, 1)
#define PIN_PA6__TIOB4 PINMUX_PIN(PIN_PA6, 6, 3)
#define PIN_PA7 7
#define PIN_PA7__GPIO PINMUX_PIN(PIN_PA7, 0, 0)
#define PIN_PA7__SDMMC0_DAT6 PINMUX_PIN(PIN_PA7, 1, 1)
#define PIN_PA7__FLEXCOM2_IO2 PINMUX_PIN(PIN_PA7, 2, 3)
#define PIN_PA7__D6 PINMUX_PIN(PIN_PA7, 3, 1)
#define PIN_PA7__TIOA4 PINMUX_PIN(PIN_PA7, 6, 3)
#define PIN_PA8 8
#define PIN_PA8__GPIO PINMUX_PIN(PIN_PA8, 0, 0)
#define PIN_PA8__SDMMC0_DAT7 PINMUX_PIN(PIN_PA8, 1, 1)
#define PIN_PA8__FLEXCOM2_IO3 PINMUX_PIN(PIN_PA8, 2, 3)
#define PIN_PA8__D7 PINMUX_PIN(PIN_PA8, 3, 1)
#define PIN_PA8__TIOA5 PINMUX_PIN(PIN_PA8, 6, 3)
#define PIN_PA9 9
#define PIN_PA9__GPIO PINMUX_PIN(PIN_PA9, 0, 0)
#define PIN_PA9__SDMMC0_DAT2 PINMUX_PIN(PIN_PA9, 1, 1)
#define PIN_PA9__FLEXCOM0_IO2 PINMUX_PIN(PIN_PA9, 2, 1)
#define PIN_PA9__D2 PINMUX_PIN(PIN_PA9, 3, 1)
#define PIN_PA9__TIOB5 PINMUX_PIN(PIN_PA9, 6, 3)
#define PIN_PA10 10
#define PIN_PA10__GPIO PINMUX_PIN(PIN_PA10, 0, 0)
#define PIN_PA10__SDMMC0_DAT3 PINMUX_PIN(PIN_PA10, 1, 1)
#define PIN_PA10__FLEXCOM0_IO3 PINMUX_PIN(PIN_PA10, 2, 1)
#define PIN_PA10__D3 PINMUX_PIN(PIN_PA10, 3, 1)
#define PIN_PA10__TCLK5 PINMUX_PIN(PIN_PA10, 6, 3)
#define PIN_PA11 11
#define PIN_PA11__GPIO PINMUX_PIN(PIN_PA11, 0, 0)
#define PIN_PA11__SDMMC0_DS PINMUX_PIN(PIN_PA11, 1, 1)
#define PIN_PA11__FLEXCOM0_IO4 PINMUX_PIN(PIN_PA11, 2, 1)
#define PIN_PA11__NANDRDY PINMUX_PIN(PIN_PA11, 3, 1)
#define PIN_PA11__TIOB3 PINMUX_PIN(PIN_PA11, 6, 3)
#define PIN_PA12 12
#define PIN_PA12__GPIO PINMUX_PIN(PIN_PA12, 0, 0)
#define PIN_PA12__FLEXCOM0_IO0 PINMUX_PIN(PIN_PA12, 2, 1)
#define PIN_PA12__NRD PINMUX_PIN(PIN_PA12, 3, 1)
#define PIN_PA12__PCK0 PINMUX_PIN(PIN_PA12, 4, 1)
#define PIN_PA12__EXT_IRQ0 PINMUX_PIN(PIN_PA12, 5, 1)
#define PIN_PA12__TIOA3 PINMUX_PIN(PIN_PA12, 6, 3)
#define PIN_PA13 13
#define PIN_PA13__GPIO PINMUX_PIN(PIN_PA13, 0, 0)
#define PIN_PA13__FLEXCOM0_IO1 PINMUX_PIN(PIN_PA13, 2, 1)
#define PIN_PA13__NCS0 PINMUX_PIN(PIN_PA13, 3, 1)
#define PIN_PA13__PCK1 PINMUX_PIN(PIN_PA13, 4, 1)
#define PIN_PA13__TCLK3 PINMUX_PIN(PIN_PA13, 6, 3)
#define PIN_PA14 14
#define PIN_PA14__GPIO PINMUX_PIN(PIN_PA14, 0, 0)
#define PIN_PA14__FLEXCOM4_IO4 PINMUX_PIN(PIN_PA14, 1, 1)
#define PIN_PA14__SDMMC0_WP PINMUX_PIN(PIN_PA14, 2, 1)
#define PIN_PA14__FLEXCOM3_IO0 PINMUX_PIN(PIN_PA14, 3, 4)
#define PIN_PA15 15
#define PIN_PA15__GPIO PINMUX_PIN(PIN_PA15, 0, 0)
#define PIN_PA15__FLEXCOM4_IO3 PINMUX_PIN(PIN_PA15, 1, 1)
#define PIN_PA15__SDMMC0_1V8SEL PINMUX_PIN(PIN_PA15, 2, 1)
#define PIN_PA15__FLEXCOM3_IO1 PINMUX_PIN(PIN_PA15, 3, 4)
#define PIN_PA16 16
#define PIN_PA16__GPIO PINMUX_PIN(PIN_PA16, 0, 0)
#define PIN_PA16__FLEXCOM4_IO2 PINMUX_PIN(PIN_PA16, 1, 1)
#define PIN_PA16__SDMMCo_CD PINMUX_PIN(PIN_PA16, 2, 1)
#define PIN_PA16__PCK2 PINMUX_PIN(PIN_PA16, 4, 1)
#define PIN_PA16__EXT_IRQ1 PINMUX_PIN(PIN_PA16, 5, 1)
#define PIN_PA17 17
#define PIN_PA17__GPIO PINMUX_PIN(PIN_PA17, 0, 0)
#define PIN_PA17__FLEXCOM4_IO1 PINMUX_PIN(PIN_PA17, 1, 1)
#define PIN_PA18 18
#define PIN_PA18__GPIO PINMUX_PIN(PIN_PA18, 0, 0)
#define PIN_PA18__FLEXCOM4_IO0 PINMUX_PIN(PIN_PA18, 1, 1)
#define PIN_PA19 19
#define PIN_PA19__GPIO PINMUX_PIN(PIN_PA19, 0, 0)
#define PIN_PA19__TK0 PINMUX_PIN(PIN_PA19, 1, 1)
#define PIN_PA19__FLEXCOM4_IO5 PINMUX_PIN(PIN_PA19, 3, 1)
#define PIN_PA19__PWML0 PINMUX_PIN(PIN_PA19, 4, 3)
#define PIN_PA20 20
#define PIN_PA20__GPIO PINMUX_PIN(PIN_PA20, 0, 0)
#define PIN_PA20__TD0 PINMUX_PIN(PIN_PA20, 1, 1)
#define PIN_PA20__FLEXCOM3_IO4 PINMUX_PIN(PIN_PA20, 2, 2)
#define PIN_PA20__FLEXCOM4_IO6 PINMUX_PIN(PIN_PA20, 3, 1)
#define PIN_PA20__PWMH0 PINMUX_PIN(PIN_PA20, 4, 3)
#define PIN_PA21 21
#define PIN_PA21__GPIO PINMUX_PIN(PIN_PA21, 0, 0)
#define PIN_PA21__TF0 PINMUX_PIN(PIN_PA21, 1, 1)
#define PIN_PA21__FLEXCOM3_IO3 PINMUX_PIN(PIN_PA21, 2, 2)
#define PIN_PA21__PWML1 PINMUX_PIN(PIN_PA21, 4, 3)
#define PIN_PA22 22
#define PIN_PA22__GPIO PINMUX_PIN(PIN_PA22, 0, 0)
#define PIN_PA22__RD0 PINMUX_PIN(PIN_PA22, 1, 1)
#define PIN_PA22__FLEXCOM3_IO2 PINMUX_PIN(PIN_PA22, 2, 2)
#define PIN_PA22__PDMC0_DS1 PINMUX_PIN(PIN_PA22, 3, 1)
#define PIN_PA22__PWMH1 PINMUX_PIN(PIN_PA22, 4, 3)
#define PIN_PA23 23
#define PIN_PA23__GPIO PINMUX_PIN(PIN_PA23, 0, 0)
#define PIN_PA23__RK0 PINMUX_PIN(PIN_PA23, 1, 1)
#define PIN_PA23__FLEXCOM3_IO1 PINMUX_PIN(PIN_PA23, 2, 2)
#define PIN_PA23__PDMC0_CLK PINMUX_PIN(PIN_PA23, 3, 1)
#define PIN_PA23__PWML2 PINMUX_PIN(PIN_PA23, 4, 3)
#define PIN_PA24 24
#define PIN_PA24__GPIO PINMUX_PIN(PIN_PA24, 0, 0)
#define PIN_PA24__RF0 PINMUX_PIN(PIN_PA24, 1, 1)
#define PIN_PA24__FLEXCOM3_IO0 PINMUX_PIN(PIN_PA24, 2, 2)
#define PIN_PA24__PDMC0_DS0 PINMUX_PIN(PIN_PA24, 3, 1)
#define PIN_PA24__PWMH2 PINMUX_PIN(PIN_PA24, 4, 3)
#define PIN_PA25 25
#define PIN_PA25__GPIO PINMUX_PIN(PIN_PA25, 0, 0)
#define PIN_PA25__G0_TXCTL PINMUX_PIN(PIN_PA25, 1, 1)
#define PIN_PA25__FLEXCOM6_IO2 PINMUX_PIN(PIN_PA25, 2, 1)
#define PIN_PA26 26
#define PIN_PA26__GPIO PINMUX_PIN(PIN_PA26, 0, 0)
#define PIN_PA26__G0_TX0 PINMUX_PIN(PIN_PA26, 1, 1)
#define PIN_PA26__FLEXCOM6_IO3 PINMUX_PIN(PIN_PA26, 2, 1)
#define PIN_PA27 27
#define PIN_PA27__GPIO PINMUX_PIN(PIN_PA27, 0, 0)
#define PIN_PA27__G0_TX1 PINMUX_PIN(PIN_PA27, 1, 1)
#define PIN_PA27__FLEXCOM6_IO4 PINMUX_PIN(PIN_PA27, 2, 1)
#define PIN_PA28 28
#define PIN_PA28__GPIO PINMUX_PIN(PIN_PA28, 0, 0)
#define PIN_PA28__G0_RXCTL PINMUX_PIN(PIN_PA28, 1, 1)
#define PIN_PA28__FLEXCOM6_IO0 PINMUX_PIN(PIN_PA28, 2, 1)
#define PIN_PA29 29
#define PIN_PA29__GPIO PINMUX_PIN(PIN_PA29, 0, 0)
#define PIN_PA29__G0_RX0 PINMUX_PIN(PIN_PA29, 1, 1)
#define PIN_PA29__FLEXCOM6_IO1 PINMUX_PIN(PIN_PA29, 2, 1)
#define PIN_PA30 30
#define PIN_PA30__GPIO PINMUX_PIN(PIN_PA30, 0, 0)
#define PIN_PA30__G0_RX1 PINMUX_PIN(PIN_PA30, 1, 1)
#define PIN_PA30__FLEXCOM8_IO0 PINMUX_PIN(PIN_PA30, 2, 1)
#define PIN_PA31 31
#define PIN_PA31__GPIO PINMUX_PIN(PIN_PA31, 0, 0)
#define PIN_PA31__G0_MDC PINMUX_PIN(PIN_PA31, 1, 1)
#define PIN_PA31__FLEXCOM8_IO1 PINMUX_PIN(PIN_PA31, 2, 1)
#define PIN_PB0 32
#define PIN_PB0__GPIO PINMUX_PIN(PIN_PB0, 0, 0)
#define PIN_PB0__G0_MDIO PINMUX_PIN(PIN_PB0, 1, 1)
#define PIN_PB0__FLEXCOM8_IO3 PINMUX_PIN(PIN_PB0, 2, 2)
#define PIN_PB1 33
#define PIN_PB1__GPIO PINMUX_PIN(PIN_PB1, 0, 0)
#define PIN_PB1__G0_REFCK PINMUX_PIN(PIN_PB1, 1, 2)
#define PIN_PB1__FLEXCOM8_IO2 PINMUX_PIN(PIN_PB1, 2, 1)
#define PIN_PB2 34
#define PIN_PB2__GPIO PINMUX_PIN(PIN_PB2, 0, 0)
#define PIN_PB2__G0_RX2 PINMUX_PIN(PIN_PB2, 1, 1)
#define PIN_PB2__FLEXCOM8_IO4 PINMUX_PIN(PIN_PB2, 2, 1)
#define PIN_PB2__G0_RXER PINMUX_PIN(PIN_PB2, 3, 2)
#define PIN_PB2__RK0 PINMUX_PIN(PIN_PB2, 4, 2)
#define PIN_PB3 35
#define PIN_PB3__GPIO PINMUX_PIN(PIN_PB3, 0, 0)
#define PIN_PB3__G0_RXCK PINMUX_PIN(PIN_PB3, 1, 1)
#define PIN_PB3__FLEXCOM10_IO2 PINMUX_PIN(PIN_PB3, 2, 2)
#define PIN_PB3__TK0 PINMUX_PIN(PIN_PB3, 4, 2)
#define PIN_PB4 36
#define PIN_PB4__GPIO PINMUX_PIN(PIN_PB4, 0, 0)
#define PIN_PB4__G0_TX2 PINMUX_PIN(PIN_PB4, 1, 1)
#define PIN_PB4__FLEXCOM10_IO3 PINMUX_PIN(PIN_PB4, 2, 2)
#define PIN_PB4__TF0 PINMUX_PIN(PIN_PB4, 4, 2)
#define PIN_PB5 37
#define PIN_PB5__GPIO PINMUX_PIN(PIN_PB5, 0, 0)
#define PIN_PB5__G0_TX3 PINMUX_PIN(PIN_PB5, 1, 1)
#define PIN_PB5__FLEXCOM10_IO4 PINMUX_PIN(PIN_PB5, 2, 1)
#define PIN_PB5__TD0 PINMUX_PIN(PIN_PB5, 4, 2)
#define PIN_PB6 38
#define PIN_PB6__GPIO PINMUX_PIN(PIN_PB6, 0, 0)
#define PIN_PB6__G0_RX3 PINMUX_PIN(PIN_PB6, 1, 1)
#define PIN_PB6__FLEXCOM10_IO0 PINMUX_PIN(PIN_PB6, 2, 2)
#define PIN_PB6__RD0 PINMUX_PIN(PIN_PB6, 4, 2)
#define PIN_PB7 39
#define PIN_PB7__GPIO PINMUX_PIN(PIN_PB7, 0, 0)
#define PIN_PB7__G0_TSUCOMP PINMUX_PIN(PIN_PB7, 1, 1)
#define PIN_PB7__FLEXCOM10_IO1 PINMUX_PIN(PIN_PB7, 2, 2)
#define PIN_PB7__ADTRG PINMUX_PIN(PIN_PB7, 3, 1)
#define PIN_PB7__RF0 PINMUX_PIN(PIN_PB7, 4, 2)
#define PIN_PB8 40
#define PIN_PB8__GPIO PINMUX_PIN(PIN_PB8, 0, 0)
#define PIN_PB8__QSPI0_IO3 PINMUX_PIN(PIN_PB8, 1, 1)
#define PIN_PB8__PCK3 PINMUX_PIN(PIN_PB8, 2, 1)
#define PIN_PB8__FLEXCOM2_IO1 PINMUX_PIN(PIN_PB8, 4, 2)
#define PIN_PB9 41
#define PIN_PB9__GPIO PINMUX_PIN(PIN_PB9, 0, 0)
#define PIN_PB9__QSPI0_IO2 PINMUX_PIN(PIN_PB9, 1, 1)
#define PIN_PB9__FLEXCOM2_IO0 PINMUX_PIN(PIN_PB9, 4, 2)
#define PIN_PB9__PWMEXTRG0 PINMUX_PIN(PIN_PB9, 5, 1)
#define PIN_PB10 42
#define PIN_PB10__GPIO PINMUX_PIN(PIN_PB10, 0, 0)
#define PIN_PB10__QSPI0_IO1 PINMUX_PIN(PIN_PB10, 1, 1)
#define PIN_PB10__FLEXCOM2_IO4 PINMUX_PIN(PIN_PB10, 4, 2)
#define PIN_PB10__PWMEXTRG1 PINMUX_PIN(PIN_PB10, 5, 1)
#define PIN_PB11 43
#define PIN_PB11__GPIO PINMUX_PIN(PIN_PB11, 0, 0)
#define PIN_PB11__QSPI0_IO0 PINMUX_PIN(PIN_PB11, 1, 1)
#define PIN_PB11__FLEXCOM2_IO5 PINMUX_PIN(PIN_PB11, 4, 2)
#define PIN_PB11__PWML3 PINMUX_PIN(PIN_PB11, 5, 1)
#define PIN_PB11__TIOB3 PINMUX_PIN(PIN_PB11, 6, 2)
#define PIN_PB12 44
#define PIN_PB12__GPIO PINMUX_PIN(PIN_PB12, 0, 0)
#define PIN_PB12__QSPI0_CS PINMUX_PIN(PIN_PB12, 1, 1)
#define PIN_PB12__FLEXCOM2_IO3 PINMUX_PIN(PIN_PB12, 4, 2)
#define PIN_PB12__PWMFI1 PINMUX_PIN(PIN_PB12, 6, 1)
#define PIN_PB12__TIOA3 PINMUX_PIN(PIN_PB12, 6, 2)
#define PIN_PB13 45
#define PIN_PB13__GPIO PINMUX_PIN(PIN_PB13, 0, 0)
#define PIN_PB13__QSPI0_SCK PINMUX_PIN(PIN_PB13, 1, 1)
#define PIN_PB13__FLEXCOM2_IO2 PINMUX_PIN(PIN_PB13, 4, 2)
#define PIN_PB13__PWMFI0 PINMUX_PIN(PIN_PB13, 5, 1)
#define PIN_PB13__TCLK3 PINMUX_PIN(PIN_PB13, 6, 2)
#define PIN_PB14 46
#define PIN_PB14__GPIO PINMUX_PIN(PIN_PB14, 0, 0)
#define PIN_PB14__QSPI0_SCKN PINMUX_PIN(PIN_PB14, 1, 1)
#define PIN_PB14__QSPI1_SCK PINMUX_PIN(PIN_PB14, 2, 1)
#define PIN_PB14__I2SMCC0_CK PINMUX_PIN(PIN_PB14, 3, 3)
#define PIN_PB14__FLEXCOM10_IO5 PINMUX_PIN(PIN_PB14, 4, 1)
#define PIN_PB14__PWMH3 PINMUX_PIN(PIN_PB14, 5, 1)
#define PIN_PB14__FLEXCOM2_IO1 PINMUX_PIN(PIN_PB14, 7, 4)
#define PIN_PB15 47
#define PIN_PB15__GPIO PINMUX_PIN(PIN_PB15, 0, 0)
#define PIN_PB15__QSPI0_IO4 PINMUX_PIN(PIN_PB15, 1, 1)
#define PIN_PB15__QSPI1_IO0 PINMUX_PIN(PIN_PB15, 2, 1)
#define PIN_PB15__I2SMCC0_WS PINMUX_PIN(PIN_PB15, 3, 3)
#define PIN_PB15__FLEXCOM10_IO6 PINMUX_PIN(PIN_PB15, 4, 1)
#define PIN_PB15__PWML0 PINMUX_PIN(PIN_PB15, 5, 1)
#define PIN_PB15__TCLK4 PINMUX_PIN(PIN_PB15, 6, 2)
#define PIN_PB15__FLEXCOM2_IO0 PINMUX_PIN(PIN_PB15, 7, 4)
#define PIN_PB16 48
#define PIN_PB16__GPIO PINMUX_PIN(PIN_PB16, 0, 0)
#define PIN_PB16__QSPI0_IO5 PINMUX_PIN(PIN_PB16, 1, 1)
#define PIN_PB16__QSPI1_IO1 PINMUX_PIN(PIN_PB16, 2, 1)
#define PIN_PB16__I2SMCC0_DIN0 PINMUX_PIN(PIN_PB16, 3, 3)
#define PIN_PB16__FLEXCOM10_IO4 PINMUX_PIN(PIN_PB16, 4, 1)
#define PIN_PB16__PWMH0 PINMUX_PIN(PIN_PB16, 5, 1)
#define PIN_PB16__TIOB4 PINMUX_PIN(PIN_PB16, 6, 2)
#define PIN_PB17 49
#define PIN_PB17__GPIO PINMUX_PIN(PIN_PB17, 0, 0)
#define PIN_PB17__QSPI0_IO6 PINMUX_PIN(PIN_PB17, 1, 1)
#define PIN_PB17__QSPI1_IO2 PINMUX_PIN(PIN_PB17, 2, 1)
#define PIN_PB17__I2SMCC0_DOUT0 PINMUX_PIN(PIN_PB17, 3, 3)
#define PIN_PB17__FLEXCOM10_IO3 PINMUX_PIN(PIN_PB17, 4, 1)
#define PIN_PB17__PWML1 PINMUX_PIN(PIN_PB17, 5, 1)
#define PIN_PB17__TIOA4 PINMUX_PIN(PIN_PB17, 6, 2)
#define PIN_PB18 50
#define PIN_PB18__GPIO PINMUX_PIN(PIN_PB18, 0, 0)
#define PIN_PB18__QSPI0_IO7 PINMUX_PIN(PIN_PB18, 1, 1)
#define PIN_PB18__QSPI1_IO3 PINMUX_PIN(PIN_PB18, 2, 1)
#define PIN_PB18__I2SMCC0_MCK PINMUX_PIN(PIN_PB18, 3, 3)
#define PIN_PB18__FLEXCOM10_IO2 PINMUX_PIN(PIN_PB18, 4, 1)
#define PIN_PB18__PWMH1 PINMUX_PIN(PIN_PB18, 5, 1)
#define PIN_PB18__TIOA5 PINMUX_PIN(PIN_PB18, 6, 2)
#define PIN_PB19 51
#define PIN_PB19__GPIO PINMUX_PIN(PIN_PB19, 0, 0)
#define PIN_PB19__QSPI0_DQS PINMUX_PIN(PIN_PB19, 1, 1)
#define PIN_PB19__EXT_IRQ1 PINMUX_PIN(PIN_PB19, 2, 2)
#define PIN_PB19__PCK4 PINMUX_PIN(PIN_PB19, 3, 1)
#define PIN_PB19__FLEXCOM10_IO1 PINMUX_PIN(PIN_PB19, 4, 1)
#define PIN_PB19__PWML2 PINMUX_PIN(PIN_PB19, 5, 1)
#define PIN_PB19__TIOB5 PINMUX_PIN(PIN_PB19, 6, 2)
#define PIN_PB20 52
#define PIN_PB20__GPIO PINMUX_PIN(PIN_PB20, 0, 0)
#define PIN_PB20__QSPI0_INT PINMUX_PIN(PIN_PB20, 1, 1)
#define PIN_PB20__QSPI1_CS PINMUX_PIN(PIN_PB20, 2, 1)
#define PIN_PB20__FLEXCOM10_IO0 PINMUX_PIN(PIN_PB20, 4, 1)
#define PIN_PB20__PWMH2 PINMUX_PIN(PIN_PB20, 5, 1)
#define PIN_PB20__TCLK5 PINMUX_PIN(PIN_PB20, 6, 2)
#define PIN_PB21 53
#define PIN_PB21__GPIO PINMUX_PIN(PIN_PB21, 0, 0)
#define PIN_PB21__SDMMC1_RSTN PINMUX_PIN(PIN_PB21, 1, 1)
#define PIN_PB21__FLEXCOM6_IO4 PINMUX_PIN(PIN_PB21, 2, 2)
#define PIN_PB21__TIOB2 PINMUX_PIN(PIN_PB21, 3, 2)
#define PIN_PB21__ADTRG PINMUX_PIN(PIN_PB21, 4, 2)
#define PIN_PB21__EXT_IRQ0 PINMUX_PIN(PIN_PB21, 5, 2)
#define PIN_PB22 54
#define PIN_PB22__GPIO PINMUX_PIN(PIN_PB22, 0, 0)
#define PIN_PB22__SDMMC1_CMD PINMUX_PIN(PIN_PB22, 1, 1)
#define PIN_PB22__FLEXCOM6_IO3 PINMUX_PIN(PIN_PB22, 2, 2)
#define PIN_PB22__TCLK2 PINMUX_PIN(PIN_PB22, 3, 2)
#define PIN_PB23 55
#define PIN_PB23__GPIO PINMUX_PIN(PIN_PB23, 0, 0)
#define PIN_PB23__SDMMC1_CK PINMUX_PIN(PIN_PB23, 1, 1)
#define PIN_PB23__FLEXCOM6_IO2 PINMUX_PIN(PIN_PB23, 2, 2)
#define PIN_PB23__TIOA2 PINMUX_PIN(PIN_PB23, 3, 2)
#define PIN_PB24 56
#define PIN_PB24__GPIO PINMUX_PIN(PIN_PB24, 0, 0)
#define PIN_PB24__SDMMC1_DAT0 PINMUX_PIN(PIN_PB24, 1, 1)
#define PIN_PB24__FLEXCOM6_IO0 PINMUX_PIN(PIN_PB24, 2, 2)
#define PIN_PB25 57
#define PIN_PB25__GPIO PINMUX_PIN(PIN_PB25, 0, 0)
#define PIN_PB25__SDMMC1_DAT1 PINMUX_PIN(PIN_PB25, 1, 1)
#define PIN_PB25__FLEXCOM6_IO1 PINMUX_PIN(PIN_PB25, 2, 2)
#define PIN_PB25__TIOB2 PINMUX_PIN(PIN_PB25, 3, 1)
#define PIN_PB26 58
#define PIN_PB26__GPIO PINMUX_PIN(PIN_PB26, 0, 0)
#define PIN_PB26__SDMMC1_DAT2 PINMUX_PIN(PIN_PB26, 1, 1)
#define PIN_PB26__FLEXCOM8_IO0 PINMUX_PIN(PIN_PB26, 2, 3)
#define PIN_PB26__TCLK2 PINMUX_PIN(PIN_PB26, 3, 1)
#define PIN_PB27 59
#define PIN_PB27__GPIO PINMUX_PIN(PIN_PB27, 0, 0)
#define PIN_PB27__SDMMC1_DAT3 PINMUX_PIN(PIN_PB27, 1, 1)
#define PIN_PB27__FLEXCOM8_IO1 PINMUX_PIN(PIN_PB27, 2, 3)
#define PIN_PB27__TIOA2 PINMUX_PIN(PIN_PB27, 3, 1)
#define PIN_PB28 60
#define PIN_PB28__GPIO PINMUX_PIN(PIN_PB28, 0, 0)
#define PIN_PB28__SDMMC1_WP PINMUX_PIN(PIN_PB28, 1, 1)
#define PIN_PB28__FLEXCOM1_IO0 PINMUX_PIN(PIN_PB28, 3, 3)
#define PIN_PB28__D15 PINMUX_PIN(PIN_PB28, 5, 1)
#define PIN_PB29 61
#define PIN_PB29__GPIO PINMUX_PIN(PIN_PB29, 0, 0)
#define PIN_PB29__SDMMC1_CD PINMUX_PIN(PIN_PB29, 1, 1)
#define PIN_PB29__I2SMCC0_MCK PINMUX_PIN(PIN_PB29, 2, 1)
#define PIN_PB29__FLEXCOM1_IO1 PINMUX_PIN(PIN_PB29, 3, 3)
#define PIN_PB29__D14 PINMUX_PIN(PIN_PB29, 5, 2)
#define PIN_PB30 62
#define PIN_PB30__GPIO PINMUX_PIN(PIN_PB30, 0, 0)
#define PIN_PB30__SDMMC1_1V8SEL PINMUX_PIN(PIN_PB30, 1, 1)
#define PIN_PB30__I2SMCC1_MCK PINMUX_PIN(PIN_PB30, 2, 2)
#define PIN_PB30__FLEXCOM1_IO2 PINMUX_PIN(PIN_PB30, 3, 3)
#define PIN_PB30__TIOA1 PINMUX_PIN(PIN_PB30, 4, 1)
#define PIN_PB30__NCS1 PINMUX_PIN(PIN_PB30, 5, 1)
#define PIN_PB31 63
#define PIN_PB31__GPIO PINMUX_PIN(PIN_PB31, 0, 0)
#define PIN_PB31__PCK7 PINMUX_PIN(PIN_PB31, 1, 2)
#define PIN_PB31__I2SMCC1_DIN1 PINMUX_PIN(PIN_PB31, 2, 1)
#define PIN_PB31__FLEXCOM1_IO3 PINMUX_PIN(PIN_PB31, 3, 3)
#define PIN_PB31__TCLK1 PINMUX_PIN(PIN_PB31, 4, 1)
#define PIN_PB31__NWE PINMUX_PIN(PIN_PB31, 5, 2)
#define PIN_PC0 64
#define PIN_PC0__GPIO PINMUX_PIN(PIN_PC0, 0, 0)
#define PIN_PC0__PCK6 PINMUX_PIN(PIN_PC0, 1, 2)
#define PIN_PC0__I2SMCC1_DIN2 PINMUX_PIN(PIN_PC0, 2, 1)
#define PIN_PC0__FLEXCOM9_IO4 PINMUX_PIN(PIN_PC0, 3, 2)
#define PIN_PC0__TIOB1 PINMUX_PIN(PIN_PC0, 4, 1)
#define PIN_PC0__NWR1 PINMUX_PIN(PIN_PC0, 5, 1)
#define PIN_PC1 65
#define PIN_PC1__GPIO PINMUX_PIN(PIN_PC1, 0, 0)
#define PIN_PC1__PCK5 PINMUX_PIN(PIN_PC1, 1, 1)
#define PIN_PC1__FLEXCOM9_IO2 PINMUX_PIN(PIN_PC1, 3, 2)
#define PIN_PC1__SMCK PINMUX_PIN(PIN_PC1, 5, 1)
#define PIN_PC2 66
#define PIN_PC2__GPIO PINMUX_PIN(PIN_PC2, 0, 0)
#define PIN_PC2__EXT_IRQ0 PINMUX_PIN(PIN_PC2, 1, 3)
#define PIN_PC2__FLEXCOM9_IO3 PINMUX_PIN(PIN_PC2, 3, 2)
#define PIN_PC2__A11 PINMUX_PIN(PIN_PC2, 5, 1)
#define PIN_PC3 67
#define PIN_PC3__GPIO PINMUX_PIN(PIN_PC3, 0, 0)
#define PIN_PC3__SPDIF_RX PINMUX_PIN(PIN_PC3, 1, 2)
#define PIN_PC3__FLEXCOM9_IO0 PINMUX_PIN(PIN_PC3, 3, 2)
#define PIN_PC3__FLEXCOM0_IO4 PINMUX_PIN(PIN_PC3, 4, 2)
#define PIN_PC3__A10 PINMUX_PIN(PIN_PC3, 5, 1)
#define PIN_PC4 68
#define PIN_PC4__GPIO PINMUX_PIN(PIN_PC4, 0, 0)
#define PIN_PC4__SPDIF_TX PINMUX_PIN(PIN_PC4, 1, 2)
#define PIN_PC4__FLEXCOM9_IO1 PINMUX_PIN(PIN_PC4, 3, 2)
#define PIN_PC4__FLEXCOM0_IO3 PINMUX_PIN(PIN_PC4, 4, 2)
#define PIN_PC4__D0 PINMUX_PIN(PIN_PC4, 5, 2)
#define PIN_PC5 69
#define PIN_PC5__GPIO PINMUX_PIN(PIN_PC5, 0, 0)
#define PIN_PC5__I3CC_SDASPUE PINMUX_PIN(PIN_PC5, 1, 1)
#define PIN_PC5__I2SMCC1_DIN3 PINMUX_PIN(PIN_PC5, 2, 1)
#define PIN_PC5__FLEXCOM0_IO2 PINMUX_PIN(PIN_PC5, 4, 2)
#define PIN_PC5__D1 PINMUX_PIN(PIN_PC5, 5, 2)
#define PIN_PC6 70
#define PIN_PC6__GPIO PINMUX_PIN(PIN_PC6, 0, 0)
#define PIN_PC6__I3CC_SCL PINMUX_PIN(PIN_PC6, 1, 1)
#define PIN_PC6__FLEXCOM0_IO1 PINMUX_PIN(PIN_PC6, 4, 2)
#define PIN_PC6__D4 PINMUX_PIN(PIN_PC6, 5, 2)
#define PIN_PC7 71
#define PIN_PC7__GPIO PINMUX_PIN(PIN_PC7, 0, 0)
#define PIN_PC7__I3CC_SDA PINMUX_PIN(PIN_PC7, 1, 1)
#define PIN_PC7__FLEXCOM0_IO0 PINMUX_PIN(PIN_PC7, 4, 2)
#define PIN_PC7__D5 PINMUX_PIN(PIN_PC7, 5, 2)
#define PIN_PC8 72
#define PIN_PC8__GPIO PINMUX_PIN(PIN_PC8, 0, 0)
#define PIN_PC8__I2SMCC0_DIN1 PINMUX_PIN(PIN_PC8, 1, 1)
#define PIN_PC8__PDMC0_DS1 PINMUX_PIN(PIN_PC8, 2, 2)
#define PIN_PC8__I2SMCC1_DOUT1 PINMUX_PIN(PIN_PC8, 3, 1)
#define PIN_PC8__FLEXCOM9_IO0 PINMUX_PIN(PIN_PC8, 4, 1)
#define PIN_PC8__D6 PINMUX_PIN(PIN_PC8, 5, 2)
#define PIN_PC9 73
#define PIN_PC9__GPIO PINMUX_PIN(PIN_PC9, 0, 0)
#define PIN_PC9__I2SMCC0_DIN2 PINMUX_PIN(PIN_PC9, 1, 1)
#define PIN_PC9__PDMC0_CLK PINMUX_PIN(PIN_PC9, 2, 2)
#define PIN_PC9__I2SMCC1_DOUT2 PINMUX_PIN(PIN_PC9, 3, 1)
#define PIN_PC9__FLEXCOM9_IO1 PINMUX_PIN(PIN_PC9, 4, 1)
#define PIN_PC9__D7 PINMUX_PIN(PIN_PC9, 5, 2)
#define PIN_PC10 74
#define PIN_PC10__GPIO PINMUX_PIN(PIN_PC10, 0, 0)
#define PIN_PC10__I2SMCC0_DIN3 PINMUX_PIN(PIN_PC10, 1, 1)
#define PIN_PC10__PDMC0_DS0 PINMUX_PIN(PIN_PC10, 2, 2)
#define PIN_PC10__I2SMCC1_DOUT3 PINMUX_PIN(PIN_PC10, 3, 1)
#define PIN_PC10__FLEXCOM9_IO2 PINMUX_PIN(PIN_PC10, 4, 1)
#define PIN_PC10__D2 PINMUX_PIN(PIN_PC10, 5, 2)
#define PIN_PC11 75
#define PIN_PC11__GPIO PINMUX_PIN(PIN_PC11, 0, 0)
#define PIN_PC11__I2SMCC0_DOUT1 PINMUX_PIN(PIN_PC11, 1, 1)
#define PIN_PC11__PDMC1_DS0 PINMUX_PIN(PIN_PC11, 2, 1)
#define PIN_PC11__FLEXCOM9_IO3 PINMUX_PIN(PIN_PC11, 4, 1)
#define PIN_PC10__D3 PINMUX_PIN(PIN_PC10, 5, 2)
#define PIN_PC12 76
#define PIN_PC12__GPIO PINMUX_PIN(PIN_PC12, 0, 0)
#define PIN_PC12__I2SMCC0_DOUT2 PINMUX_PIN(PIN_PC12, 1, 1)
#define PIN_PC12__PDMC1_CLK PINMUX_PIN(PIN_PC12, 2, 1)
#define PIN_PC12__FLEXCOM9_IO4 PINMUX_PIN(PIN_PC12, 4, 1)
#define PIN_PC12__A9 PINMUX_PIN(PIN_PC12, 5, 1)
#define PIN_PC13 77
#define PIN_PC13__GPIO PINMUX_PIN(PIN_PC13, 0, 0)
#define PIN_PC13__I2SMCC0_DOUT3 PINMUX_PIN(PIN_PC13, 1, 1)
#define PIN_PC13__PDMC1_DS1 PINMUX_PIN(PIN_PC13, 2, 1)
#define PIN_PC13__A8 PINMUX_PIN(PIN_PC13, 5, 1)
#define PIN_PC14 78
#define PIN_PC14__GPIO PINMUX_PIN(PIN_PC14, 0, 0)
#define PIN_PC14__I2SMCC1_DIN0 PINMUX_PIN(PIN_PC14, 1, 1)
#define PIN_PC14__SPDIF_RX PINMUX_PIN(PIN_PC14, 2, 3)
#define PIN_PC14__FLEXCOM1_IO0 PINMUX_PIN(PIN_PC14, 3, 2)
#define PIN_PC14__A7 PINMUX_PIN(PIN_PC14, 5, 1)
#define PIN_PC15 79
#define PIN_PC15__GPIO PINMUX_PIN(PIN_PC15, 0, 0)
#define PIN_PC15__I2SMCC1_WS PINMUX_PIN(PIN_PC15, 1, 1)
#define PIN_PC15__PDMC1_DS1 PINMUX_PIN(PIN_PC15, 2, 2)
#define PIN_PC15__FLEXCOM1_IO1 PINMUX_PIN(PIN_PC15, 3, 2)
#define PIN_PC15__A6 PINMUX_PIN(PIN_PC15, 5, 1)
#define PIN_PC16 80
#define PIN_PC16__GPIO PINMUX_PIN(PIN_PC16, 0, 0)
#define PIN_PC16__I2SMCC1_CK PINMUX_PIN(PIN_PC16, 1, 1)
#define PIN_PC16__PDMC1_CLK PINMUX_PIN(PIN_PC16, 2, 2)
#define PIN_PC16__FLEXCOM1_IO2 PINMUX_PIN(PIN_PC16, 3, 2)
#define PIN_PC16__TIOA1 PINMUX_PIN(PIN_PC16, 4, 2)
#define PIN_PC16__A5 PINMUX_PIN(PIN_PC16, 5, 1)
#define PIN_PC17 81
#define PIN_PC17__GPIO PINMUX_PIN(PIN_PC17, 0, 0)
#define PIN_PC17__I2SMCC1_DOUT0 PINMUX_PIN(PIN_PC17, 1, 1)
#define PIN_PC17__PDMC1_DS0 PINMUX_PIN(PIN_PC17, 2, 2)
#define PIN_PC17__FLEXCOM1_IO3 PINMUX_PIN(PIN_PC17, 3, 2)
#define PIN_PC17__TCLK1 PINMUX_PIN(PIN_PC17, 4, 2)
#define PIN_PC17__A4 PINMUX_PIN(PIN_PC17, 5, 1)
#define PIN_PC18 82
#define PIN_PC18__GPIO PINMUX_PIN(PIN_PC18, 0, 0)
#define PIN_PC18__I2SMCC0_DIN0 PINMUX_PIN(PIN_PC18, 1, 1)
#define PIN_PC18__SPDIF_TX PINMUX_PIN(PIN_PC18, 2, 3)
#define PIN_PC18__FLEXCOM1_IO4 PINMUX_PIN(PIN_PC18, 3, 2)
#define PIN_PC18__TIOB1 PINMUX_PIN(PIN_PC18, 4, 2)
#define PIN_PC18__A3 PINMUX_PIN(PIN_PC18, 5, 1)
#define PIN_PC19 83
#define PIN_PC19__GPIO PINMUX_PIN(PIN_PC19, 0, 0)
#define PIN_PC19__I2SMCC0_WS PINMUX_PIN(PIN_PC19, 1, 1)
#define PIN_PC19__PCK6 PINMUX_PIN(PIN_PC19, 2, 1)
#define PIN_PC19__A2 PINMUX_PIN(PIN_PC19, 5, 1)
#define PIN_PC20 84
#define PIN_PC20__GPIO PINMUX_PIN(PIN_PC20, 0, 0)
#define PIN_PC20__I2SMCC0_DOUT0 PINMUX_PIN(PIN_PC20, 1, 1)
#define PIN_PC20__A1 PINMUX_PIN(PIN_PC20, 5, 1)
#define PIN_PC21 85
#define PIN_PC21__GPIO PINMUX_PIN(PIN_PC21, 0, 0)
#define PIN_PC21__I2SMCC0_CK PINMUX_PIN(PIN_PC21, 1, 1)
#define PIN_PC21__PCK7 PINMUX_PIN(PIN_PC21, 2, 1)
#define PIN_PC21__A0 PINMUX_PIN(PIN_PC21, 5, 1)
#define PIN_PC22 86
#define PIN_PC22__GPIO PINMUX_PIN(PIN_PC22, 0, 0)
#define PIN_PC22__NTRST PINMUX_PIN(PIN_PC22, 1, 1)
#define PIN_PC22__NWAIT PINMUX_PIN(PIN_PC22, 5, 1)
#define PIN_PC23 87
#define PIN_PC23__GPIO PINMUX_PIN(PIN_PC23, 0, 0)
#define PIN_PC23__TCK_SWCLK PINMUX_PIN(PIN_PC23, 1, 1)
#define PIN_PC24 88
#define PIN_PC24__GPIO PINMUX_PIN(PIN_PC24, 0, 0)
#define PIN_PC24__TMS_SWDIO PINMUX_PIN(PIN_PC24, 1, 1)
#define PIN_PC25 89
#define PIN_PC25__GPIO PINMUX_PIN(PIN_PC25, 0, 0)
#define PIN_PC25__TDI PINMUX_PIN(PIN_PC25, 1, 1)
#define PIN_PC26 90
#define PIN_PC26__GPIO PINMUX_PIN(PIN_PC26, 0, 0)
#define PIN_PC26__TDO PINMUX_PIN(PIN_PC26, 1, 1)
#define PIN_PC26__A15 PINMUX_PIN(PIN_PC26, 5, 1)
#define PIN_PC27 91
#define PIN_PC27__GPIO PINMUX_PIN(PIN_PC27, 0, 0)
#define PIN_PC27__SDMMC2_CMD PINMUX_PIN(PIN_PC27, 1, 1)
#define PIN_PC27__FLEXCOM8_IO0 PINMUX_PIN(PIN_PC27, 2, 2)
#define PIN_PC27__TD1 PINMUX_PIN(PIN_PC27, 4, 2)
#define PIN_PC27__D8 PINMUX_PIN(PIN_PC27, 5, 1)
#define PIN_PC28 92
#define PIN_PC28__GPIO PINMUX_PIN(PIN_PC28, 0, 0)
#define PIN_PC28__SDMMC2_CK PINMUX_PIN(PIN_PC28, 1, 1)
#define PIN_PC28__FLEXCOM8_IO1 PINMUX_PIN(PIN_PC28, 2, 2)
#define PIN_PC28__TF1 PINMUX_PIN(PIN_PC28, 4, 2)
#define PIN_PC28__D9 PINMUX_PIN(PIN_PC28, 5, 1)
#define PIN_PC29 93
#define PIN_PC29__GPIO PINMUX_PIN(PIN_PC29, 0, 0)
#define PIN_PC29__SDMMC2_DAT0 PINMUX_PIN(PIN_PC29, 1, 1)
#define PIN_PC29__FLEXCOM8_IO2 PINMUX_PIN(PIN_PC29, 2, 2)
#define PIN_PC29__TK1 PINMUX_PIN(PIN_PC29, 4, 2)
#define PIN_PC29__D10 PINMUX_PIN(PIN_PC29, 5, 1)
#define PIN_PC29__TCLK0 PINMUX_PIN(PIN_PC29, 6, 1)
#define PIN_PC30 94
#define PIN_PC30__GPIO PINMUX_PIN(PIN_PC30, 0, 0)
#define PIN_PC30__SDMMC2_DAT1 PINMUX_PIN(PIN_PC30, 1, 1)
#define PIN_PC30__FLEXCOM8_IO3 PINMUX_PIN(PIN_PC30, 2, 2)
#define PIN_PC30__RD1 PINMUX_PIN(PIN_PC30, 4, 2)
#define PIN_PC30__D11 PINMUX_PIN(PIN_PC30, 5, 1)
#define PIN_PC30__TIOA0 PINMUX_PIN(PIN_PC30, 6, 1)
#define PIN_PC31 95
#define PIN_PC31__GPIO PINMUX_PIN(PIN_PC31, 0, 0)
#define PIN_PC31__SDMMC2_DAT2 PINMUX_PIN(PIN_PC31, 1, 1)
#define PIN_PC31__FLEXCOM8_IO4 PINMUX_PIN(PIN_PC31, 2, 2)
#define PIN_PC31__PCK0 PINMUX_PIN(PIN_PC31, 3, 2)
#define PIN_PC31__RK1 PINMUX_PIN(PIN_PC31, 4, 2)
#define PIN_PC31__D12 PINMUX_PIN(PIN_PC31, 5, 1)
#define PIN_PC31__TIOB0 PINMUX_PIN(PIN_PC31, 6, 1)
#define PIN_PD0 96
#define PIN_PD0__GPIO PINMUX_PIN(PIN_PD0, 0, 0)
#define PIN_PD0__SDMMC2_DAT3 PINMUX_PIN(PIN_PD0, 1, 1)
#define PIN_PD0__PCK1 PINMUX_PIN(PIN_PD0, 3, 2)
#define PIN_PD0__RF1 PINMUX_PIN(PIN_PD0, 4, 2)
#define PIN_PD0__D13 PINMUX_PIN(PIN_PD0, 5, 1)
#define PIN_PD1 97
#define PIN_PD1__GPIO PINMUX_PIN(PIN_PD1, 0, 0)
#define PIN_PD1__SDMMC2_WP PINMUX_PIN(PIN_PD1, 1, 1)
#define PIN_PD1__FLEXCOM1_IO5 PINMUX_PIN(PIN_PD1, 2, 1)
#define PIN_PD1__LCDC_HSYNC PINMUX_PIN(PIN_PD1, 3, 2)
#define PIN_PD1__FLEXCOM3_IO0 PINMUX_PIN(PIN_PD1, 4, 3)
#define PIN_PD2 98
#define PIN_PD2__GPIO PINMUX_PIN(PIN_PD2, 0, 0)
#define PIN_PD2__SDMMC2_CD PINMUX_PIN(PIN_PD2, 1, 1)
#define PIN_PD2__FLEXCOM1_IO6 PINMUX_PIN(PIN_PD2, 2, 1)
#define PIN_PD2__LCDC_VSYNC PINMUX_PIN(PIN_PD2, 3, 2)
#define PIN_PD2__FLEXCOM3_IO1 PINMUX_PIN(PIN_PD2, 4, 3)
#define PIN_PD3 99
#define PIN_PD3__GPIO PINMUX_PIN(PIN_PD3, 0, 0)
#define PIN_PD3__SDMMC2_1V8SEL PINMUX_PIN(PIN_PD3, 1, 1)
#define PIN_PD3__FLEXCOM1_IO4 PINMUX_PIN(PIN_PD3, 2, 1)
#define PIN_PD3__TIOA0 PINMUX_PIN(PIN_PD3, 3, 2)
#define PIN_PD3__FLEXCOM3_IO2 PINMUX_PIN(PIN_PD3, 4, 3)
#define PIN_PD3__EXT_IRQ1 PINMUX_PIN(PIN_PD3, 5, 3)
#define PIN_PD4 100
#define PIN_PD4__GPIO PINMUX_PIN(PIN_PD4, 0, 0)
#define PIN_PD4__LCDC_HSYNC PINMUX_PIN(PIN_PD4, 1, 1)
#define PIN_PD4__FLEXCOM1_IO2 PINMUX_PIN(PIN_PD4, 2, 1)
#define PIN_PD4__TIOB0 PINMUX_PIN(PIN_PD4, 3, 2)
#define PIN_PD4__FLEXCOM7_IO1 PINMUX_PIN(PIN_PD4, 4, 3)
#define PIN_PD5 101
#define PIN_PD5__GPIO PINMUX_PIN(PIN_PD5, 0, 0)
#define PIN_PD5__LCDC_VSYNC PINMUX_PIN(PIN_PD5, 1, 1)
#define PIN_PD5__FLEXCOM1_IO3 PINMUX_PIN(PIN_PD5, 2, 1)
#define PIN_PD5__TCLK0 PINMUX_PIN(PIN_PD5, 3, 2)
#define PIN_PD5__FLEXCOM7_IO0 PINMUX_PIN(PIN_PD5, 4, 3)
#define PIN_PD6 102
#define PIN_PD6__GPIO PINMUX_PIN(PIN_PD6, 0, 0)
#define PIN_PD6__LCDC_PWM PINMUX_PIN(PIN_PD6, 1, 1)
#define PIN_PD6__FLEXCOM1_IO1 PINMUX_PIN(PIN_PD6, 2, 1)
#define PIN_PD6__FLEXCOM7_IO2 PINMUX_PIN(PIN_PD6, 4, 3)
#define PIN_PD7 103
#define PIN_PD7__GPIO PINMUX_PIN(PIN_PD7, 0, 0)
#define PIN_PD7__LCDC_DISP PINMUX_PIN(PIN_PD7, 1, 1)
#define PIN_PD7__FLEXCOM1_IO0 PINMUX_PIN(PIN_PD7, 2, 1)
#define PIN_PD7__FLEXCOM7_IO3 PINMUX_PIN(PIN_PD7, 4, 3)
#define PIN_PD8 104
#define PIN_PD8__GPIO PINMUX_PIN(PIN_PD8, 0, 0)
#define PIN_PD8__CANTX0 PINMUX_PIN(PIN_PD8, 1, 1)
#define PIN_PD8__FLEXCOM7_IO0 PINMUX_PIN(PIN_PD8, 2, 1)
#define PIN_PD9 105
#define PIN_PD9__GPIO PINMUX_PIN(PIN_PD9, 0, 0)
#define PIN_PD9__CANRX0 PINMUX_PIN(PIN_PD9, 1, 1)
#define PIN_PD9__FLEXCOM7_IO1 PINMUX_PIN(PIN_PD9, 2, 1)
#define PIN_PD10 106
#define PIN_PD10__GPIO PINMUX_PIN(PIN_PD10, 0, 0)
#define PIN_PD10__CANTX1 PINMUX_PIN(PIN_PD10, 1, 1)
#define PIN_PD10__FLEXCOM7_IO2 PINMUX_PIN(PIN_PD10, 2, 1)
#define PIN_PD10__TIOA1 PINMUX_PIN(PIN_PD10, 3, 3)
#define PIN_PD11 107
#define PIN_PD11__GPIO PINMUX_PIN(PIN_PD11, 0, 0)
#define PIN_PD11__CANRX1 PINMUX_PIN(PIN_PD11, 1, 1)
#define PIN_PD11__FLEXCOM7_IO3 PINMUX_PIN(PIN_PD11, 2, 1)
#define PIN_PD11__TCLK1 PINMUX_PIN(PIN_PD11, 3, 3)
#define PIN_PD12 108
#define PIN_PD12__GPIO PINMUX_PIN(PIN_PD12, 0, 0)
#define PIN_PD12__CANTX2 PINMUX_PIN(PIN_PD12, 1, 1)
#define PIN_PD12__FLEXCOM7_IO4 PINMUX_PIN(PIN_PD12, 2, 1)
#define PIN_PD12__TIOB1 PINMUX_PIN(PIN_PD12, 3, 3)
#define PIN_PD12__PCK2 PINMUX_PIN(PIN_PD12, 4, 2)
#define PIN_PD12__FLEXCOM3_IO3 PINMUX_PIN(PIN_PD12, 5, 3)
#define PIN_PD13 109
#define PIN_PD13__GPIO PINMUX_PIN(PIN_PD13, 0, 0)
#define PIN_PD13__CANRX2 PINMUX_PIN(PIN_PD13, 1, 1)
#define PIN_PD13__FLEXCOM5_IO4 PINMUX_PIN(PIN_PD13, 2, 1)
#define PIN_PD13__TIOA2 PINMUX_PIN(PIN_PD13, 3, 3)
#define PIN_PD13__PCK3 PINMUX_PIN(PIN_PD13, 4, 2)
#define PIN_PD14 110
#define PIN_PD14__GPIO PINMUX_PIN(PIN_PD14, 0, 0)
#define PIN_PD14__CANTX3 PINMUX_PIN(PIN_PD14, 1, 1)
#define PIN_PD14__FLEXCOM5_IO2 PINMUX_PIN(PIN_PD14, 2, 1)
#define PIN_PD14__TIOB2 PINMUX_PIN(PIN_PD14, 3, 3)
#define PIN_PD15 111
#define PIN_PD15__GPIO PINMUX_PIN(PIN_PD15, 0, 0)
#define PIN_PD15__CANRX3 PINMUX_PIN(PIN_PD15, 1, 1)
#define PIN_PD15__FLEXCOM5_IO3 PINMUX_PIN(PIN_PD15, 2, 1)
#define PIN_PD15__TCLK2 PINMUX_PIN(PIN_PD15, 3, 3)
#define PIN_PD16 112
#define PIN_PD16__GPIO PINMUX_PIN(PIN_PD16, 0, 0)
#define PIN_PD16__CANTX4 PINMUX_PIN(PIN_PD16, 1, 1)
#define PIN_PD16__FLEXCOM5_IO0 PINMUX_PIN(PIN_PD16, 2, 1)
#define PIN_PD17 113
#define PIN_PD17__GPIO PINMUX_PIN(PIN_PD17, 0, 0)
#define PIN_PD17__CANRX4 PINMUX_PIN(PIN_PD17, 1, 1)
#define PIN_PD17__FLEXCOM5_IO1 PINMUX_PIN(PIN_PD17, 2, 1)
#define PIN_PD18 114
#define PIN_PD18__GPIO PINMUX_PIN(PIN_PD18, 0, 0)
#define PIN_PD18__FLEXCOM6_IO0 PINMUX_PIN(PIN_PD18, 2, 4)
#define PIN_PD18__CANTX1 PINMUX_PIN(PIN_PD18, 3, 2)
#define PIN_PD18__PCK4 PINMUX_PIN(PIN_PD18, 4, 2)
#define PIN_PD19 115
#define PIN_PD19__GPIO PINMUX_PIN(PIN_PD19, 0, 0)
#define PIN_PD19__FLEXCOM6_IO1 PINMUX_PIN(PIN_PD19, 2, 4)
#define PIN_PD19__CANRX1 PINMUX_PIN(PIN_PD19, 3, 2)
#define PIN_PD19__PCK2 PINMUX_PIN(PIN_PD19, 4, 3)
#define PIN_PD20 116
#define PIN_PD20__GPIO PINMUX_PIN(PIN_PD20, 0, 0)
#define PIN_PD20__PFLEXCOM6_IO2 PINMUX_PIN(PIN_PD20, 2, 4)
#define PIN_PD20__I2SMCC1_MCK PINMUX_PIN(PIN_PD20, 3, 2)
#define PIN_PD20__PCK3 PINMUX_PIN(PIN_PD20, 4, 3)
#define PIN_PD21 117
#define PIN_PD21__GPIO PINMUX_PIN(PIN_PD21, 0, 0)
#define PIN_PD21__G1_TXCTL PINMUX_PIN(PIN_PD21, 1, 2)
#define PIN_PD21__FLEXCOM6_IO2 PINMUX_PIN(PIN_PD21, 2, 3)
#define PIN_PD21__TK1 PINMUX_PIN(PIN_PD21, 3, 1)
#define PIN_PD22 118
#define PIN_PD22__GPIO PINMUX_PIN(PIN_PD22, 0, 0)
#define PIN_PD22__G1_TX0 PINMUX_PIN(PIN_PD22, 1, 1)
#define PIN_PD22__FLEXCOM6_IO3 PINMUX_PIN(PIN_PD22, 2, 3)
#define PIN_PD22__TF1 PINMUX_PIN(PIN_PD22, 3, 1)
#define PIN_PD23 119
#define PIN_PD23__GPIO PINMUX_PIN(PIN_PD23, 0, 0)
#define PIN_PD23__G1_TX1 PINMUX_PIN(PIN_PD23, 1, 1)
#define PIN_PD23__FLEXCOM6_IO4 PINMUX_PIN(PIN_PD23, 2, 3)
#define PIN_PD23__TD1 PINMUX_PIN(PIN_PD23, 3, 1)
#define PIN_PD24 120
#define PIN_PD24__GPIO PINMUX_PIN(PIN_PD24, 0, 0)
#define PIN_PD24__G1_RXCTL PINMUX_PIN(PIN_PD24, 1, 1)
#define PIN_PD24__FLEXCOM6_IO0 PINMUX_PIN(PIN_PD24, 2, 3)
#define PIN_PD24__RD1 PINMUX_PIN(PIN_PD24, 3, 1)
#define PIN_PD24__PDMC0_DS1 PINMUX_PIN(PIN_PD24, 5, 3)
#define PIN_PD25 121
#define PIN_PD25__GPIO PINMUX_PIN(PIN_PD25, 0, 0)
#define PIN_PD25__G1_MDC PINMUX_PIN(PIN_PD25, 1, 1)
#define PIN_PD25__FLEXCOM6_IO1 PINMUX_PIN(PIN_PD25, 2, 3)
#define PIN_PD25__RK1 PINMUX_PIN(PIN_PD25, 3, 1)
#define PIN_PD25__PDMC0_CLK PINMUX_PIN(PIN_PD25, 5, 3)
#define PIN_PD26 122
#define PIN_PD26__GPIO PINMUX_PIN(PIN_PD26, 0, 0)
#define PIN_PD26__G1_MDIO PINMUX_PIN(PIN_PD26, 1, 1)
#define PIN_PD26__FLEXCOM7_IO4 PINMUX_PIN(PIN_PD26, 2, 2)
#define PIN_PD26__RF1 PINMUX_PIN(PIN_PD26, 3, 1)
#define PIN_PD26__I2SMCC1_DIN2 PINMUX_PIN(PIN_PD26, 4, 2)
#define PIN_PD26__PDMC0_DS0 PINMUX_PIN(PIN_PD26, 5, 3)
#define PIN_PD27 123
#define PIN_PD27__GPIO PINMUX_PIN(PIN_PD27, 0, 0)
#define PIN_PD27__G1_RX0 PINMUX_PIN(PIN_PD27, 1, 1)
#define PIN_PD27__FLEXCOM7_IO0 PINMUX_PIN(PIN_PD27, 2, 2)
#define PIN_PD27__SPDIF_RX PINMUX_PIN(PIN_PD27, 3, 1)
#define PIN_PD27__I2SMCC1_DIN3 PINMUX_PIN(PIN_PD27, 4, 2)
#define PIN_PD28 124
#define PIN_PD28__GPIO PINMUX_PIN(PIN_PD28, 0, 0)
#define PIN_PD28__G1_RX1 PINMUX_PIN(PIN_PD28, 1, 1)
#define PIN_PD28__FLEXCOM7_IO1 PINMUX_PIN(PIN_PD28, 2, 2)
#define PIN_PD28__SPDIF_TX PINMUX_PIN(PIN_PD28, 3, 1)
#define PIN_PD28__I2SMCC1_DIN1 PINMUX_PIN(PIN_PD28, 4, 2)
#define PIN_PD29 125
#define PIN_PD29__GPIO PINMUX_PIN(PIN_PD29, 0, 0)
#define PIN_PD29__G1_REFCK PINMUX_PIN(PIN_PD29, 1, 2)
#define PIN_PD29__FLEXCOM7_IO2 PINMUX_PIN(PIN_PD29, 2, 2)
#define PIN_PD29__I2SMCC1_DOUT3 PINMUX_PIN(PIN_PD29, 3, 2)
#define PIN_PD30 126
#define PIN_PD30__GPIO PINMUX_PIN(PIN_PD30, 0, 0)
#define PIN_PD30__G1_RX2 PINMUX_PIN(PIN_PD30, 1, 1)
#define PIN_PD30__FLEXCOM7_IO3 PINMUX_PIN(PIN_PD30, 2, 2)
#define PIN_PD30__I2SMCC1_DOUT1 PINMUX_PIN(PIN_PD30, 3, 2)
#define PIN_PD30__PDMC1_DS1 PINMUX_PIN(PIN_PD30, 4, 3)
#define PIN_PD30__G1_RXER PINMUX_PIN(PIN_PD30, 5, 2)
#define PIN_PD31 127
#define PIN_PD31__GPIO PINMUX_PIN(PIN_PD31, 0, 0)
#define PIN_PD31__G1_RX3 PINMUX_PIN(PIN_PD31, 1, 1)
#define PIN_PD31__FLEXCOM5_IO4 PINMUX_PIN(PIN_PD31, 2, 2)
#define PIN_PD31__I2SMCC1_DOUT2 PINMUX_PIN(PIN_PD31, 3, 3)
#define PIN_PD31__PDMC1_DS0 PINMUX_PIN(PIN_PD31, 4, 3)
#define PIN_PE0 128
#define PIN_PE0__GPIO PINMUX_PIN(PIN_PE0, 0, 0)
#define PIN_PE0__G1_TX2 PINMUX_PIN(PIN_PE0, 1, 1)
#define PIN_PE0__FLEXCOM5_IO2 PINMUX_PIN(PIN_PE0, 2, 2)
#define PIN_PE0__I2SMCC1_DIN0 PINMUX_PIN(PIN_PE0, 3, 2)
#define PIN_PE0__PDMC1_CLK PINMUX_PIN(PIN_PE0, 4, 3)
#define PIN_PE1 129
#define PIN_PE1__GPIO PINMUX_PIN(PIN_PE1, 0, 0)
#define PIN_PE1__G1_TX3 PINMUX_PIN(PIN_PE1, 1, 1)
#define PIN_PE1__FLEXCOM5_IO3 PINMUX_PIN(PIN_PE1, 2, 2)
#define PIN_PE1__I2SMCC1_WS PINMUX_PIN(PIN_PE1, 3, 2)
#define PIN_PE1__PDMC0_DS1 PINMUX_PIN(PIN_PE1, 4, 4)
#define PIN_PE2 130
#define PIN_PE2__GPIO PINMUX_PIN(PIN_PE2, 0, 0)
#define PIN_PE2__G1_RXCK PINMUX_PIN(PIN_PE2, 1, 1)
#define PIN_PE2__FLEXCOM5_IO1 PINMUX_PIN(PIN_PE2, 2, 2)
#define PIN_PE2__I2SMCC1_CK PINMUX_PIN(PIN_PE2, 3, 2)
#define PIN_PE2__PDMC0_CLK PINMUX_PIN(PIN_PE2, 4, 4)
#define PIN_PE3 131
#define PIN_PE3__GPIO PINMUX_PIN(PIN_PE3, 0, 0)
#define PIN_PE3__G1_TSUCOMP PINMUX_PIN(PIN_PE3, 1, 1)
#define PIN_PE3__FLEXCOM5_IO0 PINMUX_PIN(PIN_PE3, 2, 2)
#define PIN_PE3__I2SMCC1_DOUT0 PINMUX_PIN(PIN_PE3, 3, 2)
#define PIN_PE3__PDMC0_DS0 PINMUX_PIN(PIN_PE3, 4, 4)
#define PIN_PE4 132
#define PIN_PE4__GPIO PINMUX_PIN(PIN_PE4, 0, 0)
#define PIN_PE4__LCDC_DAT0 PINMUX_PIN(PIN_PE4, 1, 1)
#define PIN_PE4__FLEXCOM2_IO2 PINMUX_PIN(PIN_PE4, 2, 1)
#define PIN_PE4__PWML0 PINMUX_PIN(PIN_PE4, 3, 2)
#define PIN_PE4__TIOA3 PINMUX_PIN(PIN_PE4, 4, 1)
#define PIN_PE4__I2SMCC0_DIN1 PINMUX_PIN(PIN_PE4, 5, 2)
#define PIN_PE5 133
#define PIN_PE5__GPIO PINMUX_PIN(PIN_PE5, 0, 0)
#define PIN_PE5__LCDC_DAT1 PINMUX_PIN(PIN_PE5, 1, 1)
#define PIN_PE5__FLEXCOM2_IO3 PINMUX_PIN(PIN_PE5, 2, 1)
#define PIN_PE5__PWMH0 PINMUX_PIN(PIN_PE5, 3, 2)
#define PIN_PE5__TIOB3 PINMUX_PIN(PIN_PE5, 4, 1)
#define PIN_PE5__I2SMCC0_DIN2 PINMUX_PIN(PIN_PE5, 5, 2)
#define PIN_PE6 134
#define PIN_PE6__GPIO PINMUX_PIN(PIN_PE6, 0, 0)
#define PIN_PE6__LCDC_DAT2 PINMUX_PIN(PIN_PE6, 1, 1)
#define PIN_PE6__FLEXCOM2_IO4 PINMUX_PIN(PIN_PE6, 2, 1)
#define PIN_PE6__PWML1 PINMUX_PIN(PIN_PE6, 3, 2)
#define PIN_PE6__TCLK3 PINMUX_PIN(PIN_PE6, 4, 1)
#define PIN_PE6__I2SMCC0_DIN3 PINMUX_PIN(PIN_PE6, 5, 2)
#define PIN_PE7 135
#define PIN_PE7__GPIO PINMUX_PIN(PIN_PE7, 0, 0)
#define PIN_PE7__LCDC_DAT3 PINMUX_PIN(PIN_PE7, 1, 1)
#define PIN_PE7__FLEXCOM2_IO5 PINMUX_PIN(PIN_PE7, 2, 1)
#define PIN_PE7__PWMH1 PINMUX_PIN(PIN_PE7, 3, 2)
#define PIN_PE7__TIOA4 PINMUX_PIN(PIN_PE7, 4, 1)
#define PIN_PE7__I2SMCC0_DOUT1 PINMUX_PIN(PIN_PE7, 5, 2)
#define PIN_PE8 136
#define PIN_PE8__GPIO PINMUX_PIN(PIN_PE8, 0, 0)
#define PIN_PE8__LCDC_DAT4 PINMUX_PIN(PIN_PE8, 1, 1)
#define PIN_PE8__FLEXCOM2_IO0 PINMUX_PIN(PIN_PE8, 2, 1)
#define PIN_PE8__PWML2 PINMUX_PIN(PIN_PE8, 3, 2)
#define PIN_PE8__TIOB4 PINMUX_PIN(PIN_PE8, 4, 1)
#define PIN_PE8__I2SMCC0_CK PINMUX_PIN(PIN_PE8, 5, 2)
#define PIN_PE9 137
#define PIN_PE9__GPIO PINMUX_PIN(PIN_PE9, 0, 0)
#define PIN_PE9__LCDC_DAT5 PINMUX_PIN(PIN_PE9, 1, 1)
#define PIN_PE9__FLEXCOM2_IO1 PINMUX_PIN(PIN_PE9, 2, 1)
#define PIN_PE9__PWMH2 PINMUX_PIN(PIN_PE9, 3, 2)
#define PIN_PE9__TCLK4 PINMUX_PIN(PIN_PE9, 4, 1)
#define PIN_PE9__I2SMCC0_WS PINMUX_PIN(PIN_PE9, 5, 2)
#define PIN_PE10 138
#define PIN_PE10__GPIO PINMUX_PIN(PIN_PE10, 0, 0)
#define PIN_PE10__LCDC_DAT6 PINMUX_PIN(PIN_PE10, 1, 1)
#define PIN_PE10__FLEXCOM2_IO6 PINMUX_PIN(PIN_PE10, 2, 1)
#define PIN_PE10__PWML3 PINMUX_PIN(PIN_PE10, 3, 2)
#define PIN_PE10__TIOA5 PINMUX_PIN(PIN_PE10, 4, 1)
#define PIN_PE10__I2SMCC0_DOUT2 PINMUX_PIN(PIN_PE10, 5, 2)
#define PIN_PE11 139
#define PIN_PE11__GPIO PINMUX_PIN(PIN_PE11, 0, 0)
#define PIN_PE11__LCDC_DAT7 PINMUX_PIN(PIN_PE11, 1, 1)
#define PIN_PE11__PWMH3 PINMUX_PIN(PIN_PE11, 3, 2)
#define PIN_PE11__TIOB5 PINMUX_PIN(PIN_PE11, 4, 1)
#define PIN_PE11__I2SMCC0_DOUT3 PINMUX_PIN(PIN_PE11, 5, 2)
#define PIN_PE12 140
#define PIN_PE12__GPIO PINMUX_PIN(PIN_PE12, 0, 0)
#define PIN_PE12__LCDC_DEN PINMUX_PIN(PIN_PE12, 1, 1)
#define PIN_PE12__PCK3 PINMUX_PIN(PIN_PE12, 2, 4)
#define PIN_PE12__PWMEXTRG0 PINMUX_PIN(PIN_PE12, 3, 2)
#define PIN_PE12__TCLK5 PINMUX_PIN(PIN_PE12, 4, 1)
#define PIN_PE12__I2SMCC0_DIN0 PINMUX_PIN(PIN_PE12, 5, 2)
#define PIN_PE13 141
#define PIN_PE13__GPIO PINMUX_PIN(PIN_PE13, 0, 0)
#define PIN_PE13__LCDC_PCK PINMUX_PIN(PIN_PE13, 1, 1)
#define PIN_PE13__PCK4 PINMUX_PIN(PIN_PE13, 2, 3)
#define PIN_PE13__PWMEXTRG1 PINMUX_PIN(PIN_PE13, 3, 2)
#define PIN_PE13__I2SMCC0DOUT0 PINMUX_PIN(PIN_PE13, 5, 2)

View File

@ -0,0 +1,144 @@
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* sama7d65.dtsi - Device Tree Include file for SAMA7D65 SoC
*
* Copyright (C) 2024 Microchip Technology Inc. and its subsidiaries
*
* Author: Ryan Wanner <Ryan.Wanner@microchip.com>
*
*/
#include <dt-bindings/clock/at91.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/mfd/at91-usart.h>
/ {
model = "Microchip SAMA7D65 family SoC";
compatible = "microchip,sama7d65";
#address-cells = <1>;
#size-cells = <1>;
interrupt-parent = <&gic>;
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu0: cpu@0 {
compatible = "arm,cortex-a7";
reg = <0x0>;
device_type = "cpu";
clocks = <&pmc PMC_TYPE_CORE PMC_CPUPLL>;
clock-names = "cpu";
};
};
clocks {
main_xtal: clock-mainxtal {
compatible = "fixed-clock";
#clock-cells = <0>;
};
slow_xtal: clock-slowxtal {
compatible = "fixed-clock";
#clock-cells = <0>;
};
};
soc {
compatible = "simple-bus";
ranges;
#address-cells = <1>;
#size-cells = <1>;
pioa: pinctrl@e0014000 {
compatible = "microchip,sama7d65-pinctrl", "microchip,sama7g5-pinctrl";
reg = <0xe0014000 0x800>;
interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 10>;
interrupt-controller;
#interrupt-cells = <2>;
gpio-controller;
#gpio-cells = <2>;
};
pmc: clock-controller@e0018000 {
compatible = "microchip,sama7d65-pmc", "syscon";
reg = <0xe0018000 0x200>;
interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
#clock-cells = <2>;
clocks = <&clk32k 1>, <&clk32k 0>, <&main_xtal>;
clock-names = "td_slck", "md_slck", "main_xtal";
};
clk32k: clock-controller@e001d500 {
compatible = "microchip,sama7d65-sckc", "microchip,sam9x60-sckc";
reg = <0xe001d500 0x4>;
clocks = <&slow_xtal>;
#clock-cells = <1>;
};
sdmmc1: mmc@e1208000 {
compatible = "microchip,sama7d65-sdhci", "microchip,sam9x60-sdhci";
reg = <0xe1208000 0x400>;
interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 76>, <&pmc PMC_TYPE_GCK 76>;
clock-names = "hclock", "multclk";
assigned-clocks = <&pmc PMC_TYPE_GCK 76>;
assigned-clock-rates = <200000000>;
assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_MCK1>;
status = "disabled";
};
pit64b0: timer@e1800000 {
compatible = "microchip,sama7d65-pit64b", "microchip,sam9x60-pit64b";
reg = <0xe1800000 0x100>;
interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 66>, <&pmc PMC_TYPE_GCK 66>;
clock-names = "pclk", "gclk";
};
pit64b1: timer@e1804000 {
compatible = "microchip,sama7d65-pit64b", "microchip,sam9x60-pit64b";
reg = <0xe1804000 0x100>;
interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 67>, <&pmc PMC_TYPE_GCK 67>;
clock-names = "pclk", "gclk";
};
flx6: flexcom@e2020000 {
compatible = "microchip,sama7d65-flexcom", "atmel,sama5d2-flexcom";
reg = <0xe2020000 0x200>;
ranges = <0x0 0xe2020000 0x800>;
#address-cells = <1>;
#size-cells = <1>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 40>;
status = "disabled";
uart6: serial@200 {
compatible = "microchip,sama7d65-usart", "atmel,at91sam9260-usart";
reg = <0x200 0x200>;
interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 40>;
clock-names = "usart";
atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
atmel,fifo-size = <16>;
status = "disabled";
};
};
gic: interrupt-controller@e8c11000 {
compatible = "arm,cortex-a7-gic";
reg = <0xe8c11000 0x1000>,
<0xe8c12000 0x2000>;
#interrupt-cells = <3>;
#address-cells = <0>;
interrupt-controller;
};
};
};

View File

@ -661,7 +661,7 @@
clock-frequency = <100000>;
status = "okay";
mb_fru@50 {
eeprom@50 {
compatible = "atmel,24c64";
reg = <0x50>;
};
@ -704,7 +704,7 @@
reg = <0x5d>;
status = "okay";
};
fan_fru@51 {
eeprom@51 {
compatible = "atmel,24c64";
reg = <0x51>;
};
@ -714,7 +714,7 @@
#address-cells = <1>;
#size-cells = <0>;
reg = <3>;
hsbp_fru@52 {
eeprom@52 {
compatible = "atmel,24c64";
reg = <0x52>;
status = "okay";

View File

@ -824,7 +824,7 @@
reg = <0x4a>;
status = "okay";
};
m24128_fru@51 {
eeprom@51 {
compatible = "atmel,24c128";
reg = <0x51>;
pagesize = <64>;

View File

@ -716,6 +716,7 @@
regulator-name = "+5V_USB_HS";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-boot-on;
gpio = <&gpio TEGRA_GPIO(N, 4) GPIO_ACTIVE_HIGH>;
enable-active-high;
gpio-open-drain;
@ -727,6 +728,7 @@
regulator-name = "+5V_USB_SS";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-boot-on;
gpio = <&gpio TEGRA_GPIO(N, 5) GPIO_ACTIVE_HIGH>;
enable-active-high;
gpio-open-drain;

View File

@ -160,7 +160,7 @@
};
};
mdio_gpio: mdio-gpio {
mdio_gpio: mdio {
compatible = "virtual,mdio-gpio";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_swmdio>;

View File

@ -37,7 +37,7 @@
regulator-max-microvolt = <5000000>;
};
mdio_gpio: mdio-gpio {
mdio_gpio: mdio {
compatible = "virtual,mdio-gpio";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_swmdio>;

View File

@ -94,7 +94,7 @@
mdio-gpio0 = &mdio0;
};
mdio0: mdio-gpio {
mdio0: mdio {
compatible = "virtual,mdio-gpio";
gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>, /* mdc */
<&gpio2 7 GPIO_ACTIVE_HIGH>; /* mdio */

View File

@ -691,7 +691,7 @@
adv_7280: adv7280@21 {
compatible = "adi,adv7280";
adv,force-bt656-4;
adi,force-bt656-4;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ipu1_csi0>;
reg = <0x21>;

View File

@ -113,8 +113,8 @@
"DMICDAT", "DMIC";
mux-int-port = <2>;
mux-ext-port = <3>;
hp-det-gpio = <&gpio7 8 GPIO_ACTIVE_LOW>;
mic-det-gpio = <&gpio1 9 GPIO_ACTIVE_LOW>;
hp-det-gpios = <&gpio7 8 GPIO_ACTIVE_LOW>;
mic-det-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
};
backlight_lvds: backlight-lvds {
@ -804,6 +804,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usbotg>;
disable-over-current;
dr_mode = "otg";
status = "okay";
};

View File

@ -711,8 +711,8 @@
reg_vdd3p0: regulator-3p0 {
compatible = "fsl,anatop-regulator";
regulator-name = "vdd3p0";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <3150000>;
regulator-min-microvolt = <2625000>;
regulator-max-microvolt = <3400000>;
regulator-always-on;
anatop-reg-offset = <0x120>;
anatop-vol-bit-shift = <8>;
@ -806,6 +806,7 @@
reg = <0x020c9000 0x1000>;
interrupts = <0 44 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6QDL_CLK_USBPHY1>;
phy-3p0-supply = <&reg_vdd3p0>;
fsl,anatop = <&anatop>;
};
@ -814,6 +815,7 @@
reg = <0x020ca000 0x1000>;
interrupts = <0 45 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6QDL_CLK_USBPHY2>;
phy-3p0-supply = <&reg_vdd3p0>;
fsl,anatop = <&anatop>;
};

View File

@ -108,7 +108,7 @@
"IN3R", "AMIC";
mux-int-port = <2>;
mux-ext-port = <3>;
hp-det-gpio = <&gpio4 19 GPIO_ACTIVE_LOW>;
hp-det-gpios = <&gpio4 19 GPIO_ACTIVE_LOW>;
};
panel {

View File

@ -546,8 +546,8 @@
reg_vdd3p0: regulator-3p0 {
compatible = "fsl,anatop-regulator";
regulator-name = "vdd3p0";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <3150000>;
regulator-min-microvolt = <2625000>;
regulator-max-microvolt = <3400000>;
regulator-always-on;
anatop-reg-offset = <0x120>;
anatop-vol-bit-shift = <8>;
@ -640,6 +640,7 @@
reg = <0x020c9000 0x1000>;
interrupts = <0 44 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SL_CLK_USBPHY1>;
phy-3p0-supply = <&reg_vdd3p0>;
fsl,anatop = <&anatop>;
};
@ -648,6 +649,7 @@
reg = <0x020ca000 0x1000>;
interrupts = <0 45 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SL_CLK_USBPHY2>;
phy-3p0-supply = <&reg_vdd3p0>;
fsl,anatop = <&anatop>;
};

View File

@ -157,7 +157,7 @@
"IN3R", "AMIC";
mux-int-port = <2>;
mux-ext-port = <3>;
hp-det-gpio = <&gpio4 24 GPIO_ACTIVE_LOW>;
hp-det-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>;
};
};

View File

@ -167,7 +167,7 @@
"IN3R", "AMIC";
mux-int-port = <2>;
mux-ext-port = <6>;
hp-det-gpio = <&gpio1 17 GPIO_ACTIVE_LOW>;
hp-det-gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
};
panel {

View File

@ -637,8 +637,8 @@
reg_vdd3p0: regulator-3p0 {
compatible = "fsl,anatop-regulator";
regulator-name = "vdd3p0";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <3150000>;
regulator-min-microvolt = <2625000>;
regulator-max-microvolt = <3400000>;
regulator-always-on;
anatop-reg-offset = <0x120>;
anatop-vol-bit-shift = <8>;
@ -731,6 +731,7 @@
reg = <0x020c9000 0x1000>;
interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SX_CLK_USBPHY1>;
phy-3p0-supply = <&reg_vdd3p0>;
fsl,anatop = <&anatop>;
};
@ -739,6 +740,7 @@
reg = <0x020ca000 0x1000>;
interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SX_CLK_USBPHY2>;
phy-3p0-supply = <&reg_vdd3p0>;
fsl,anatop = <&anatop>;
};

View File

@ -68,7 +68,7 @@
audio-cpu = <&sai2>;
audio-codec = <&codec>;
audio-asrc = <&asrc>;
hp-det-gpio = <&gpio5 4 0>;
hp-det-gpios = <&gpio5 4 0>;
audio-routing =
"Headphone Jack", "HP_L",
"Headphone Jack", "HP_R",

View File

@ -87,34 +87,6 @@
<&adc2 0>, <&adc2 1>, <&adc2 2>, <&adc2 3>;
};
reg_sd1_vmmc: regulator-sd1-vmmc {
compatible = "regulator-fixed";
regulator-name = "VCC3V3_SD1";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
reg_fec1_pwdn: regulator-fec1-pwdn {
compatible = "regulator-fixed";
regulator-name = "PWDN_FEC1";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
reg_fec2_pwdn: regulator-fec2-pwdn {
compatible = "regulator-fixed";
regulator-name = "PWDN_FEC2";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
gpio = <&gpio2 31 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
reg_usb_otg1_vbus: regulator-usb-otg1-vbus {
compatible = "regulator-fixed";
regulator-name = "VBUS_USBOTG1";
@ -141,6 +113,7 @@
gpio = <&pca9555 12 GPIO_ACTIVE_HIGH>;
enable-active-high;
regulator-always-on;
vin-supply = <&reg_mba_5v>;
};
reg_mpcie_3v3: regulator-mpcie-3v3 {
@ -151,6 +124,7 @@
gpio = <&pca9555 10 GPIO_ACTIVE_HIGH>;
enable-active-high;
regulator-always-on;
vin-supply = <&reg_mba_3v3>;
};
reg_mba_12v0: regulator-mba-12v0 {
@ -162,13 +136,18 @@
enable-active-high;
};
reg_lvds_transmitter: regulator-lvds-transmitter {
reg_mba_5v: regulator-mba-5v {
compatible = "regulator-fixed";
regulator-name = "#SHTDN_LVDS";
regulator-name = "VCC5V";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
};
reg_mba_3v3: regulator-mba-3v3 {
compatible = "regulator-fixed";
regulator-name = "VCC3V3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&pca9555 1 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
reg_vref_1v8: regulator-vref-1v8 {
@ -186,14 +165,7 @@
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
reg_vcc_3v3: regulator-vcc-3v3 {
compatible = "regulator-fixed";
regulator-name = "VCC3V3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
vin-supply = <&reg_mba_3v3>;
};
sound {
@ -239,7 +211,6 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_enet1>;
phy-mode = "rgmii-id";
phy-supply = <&reg_fec1_pwdn>;
phy-handle = <&ethphy1_0>;
fsl,magic-packet;
status = "okay";
@ -260,6 +231,8 @@
reset-gpios = <&gpio7 15 GPIO_ACTIVE_LOW>;
reset-assert-us = <1000>;
reset-deassert-us = <500>;
interrupt-parent = <&gpio1>;
interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
};
};
};
@ -318,7 +291,7 @@
lm75: temperature-sensor@49 {
compatible = "national,lm75a";
reg = <0x49>;
vs-supply = <&reg_vcc_3v3>;
vs-supply = <&reg_mba_3v3>;
};
};
@ -351,7 +324,7 @@
interrupts = <12 IRQ_TYPE_EDGE_FALLING>;
interrupt-controller;
#interrupt-cells = <2>;
vcc-supply = <&reg_vcc_3v3>;
vcc-supply = <&reg_mba_3v3>;
};
};
@ -668,7 +641,7 @@
pinctrl-2 = <&pinctrl_usdhc1_200mhz>, <&pinctrl_usdhc1_gpio>;
cd-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
wp-gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
vmmc-supply = <&reg_sd1_vmmc>;
vmmc-supply = <&reg_mba_3v3>;
bus-width = <4>;
no-1-8-v;
no-sdio;

View File

@ -135,6 +135,7 @@
lm75a: temperature-sensor@48 {
compatible = "national,lm75a";
reg = <0x48>;
vs-supply = <&vgen4_reg>;
};
/* NXP SE97BTP with temperature sensor + eeprom, TQMa7x 02xx */
@ -150,7 +151,6 @@
reg = <0x50>;
pagesize = <32>;
vcc-supply = <&vgen4_reg>;
status = "okay";
};
at24c02: eeprom@56 {
@ -158,7 +158,6 @@
reg = <0x56>;
pagesize = <16>;
vcc-supply = <&vgen4_reg>;
status = "okay";
};
ds1339: rtc@68 {

View File

@ -21,7 +21,6 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_enet2>;
phy-mode = "rgmii-id";
phy-supply = <&reg_fec2_pwdn>;
phy-handle = <&ethphy2_0>;
fsl,magic-packet;
status = "okay";
@ -42,6 +41,8 @@
reset-gpios = <&gpio2 28 GPIO_ACTIVE_LOW>;
reset-assert-us = <1000>;
reset-deassert-us = <500>;
interrupt-parent = <&gpio2>;
interrupts = <31 IRQ_TYPE_EDGE_FALLING>;
};
};
};

View File

@ -169,7 +169,7 @@
model = "wm8960-audio";
audio-cpu = <&sai1>;
audio-codec = <&codec>;
hp-det-gpio = <&gpio2 28 GPIO_ACTIVE_HIGH>;
hp-det-gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>;
audio-routing =
"Headphone Jack", "HP_L",
"Headphone Jack", "HP_R",

View File

@ -427,8 +427,9 @@
interrupt-names = "global",
"doorbell";
interconnects = <&system_noc MASTER_PCIE &mc_virt SLAVE_EBI_CH0>;
interconnect-names = "pcie-mem";
interconnects = <&system_noc MASTER_PCIE &mc_virt SLAVE_EBI_CH0>,
<&mem_noc MASTER_AMPSS_M0 &system_noc SLAVE_PCIE_0>;
interconnect-names = "pcie-mem", "cpu-pcie";
resets = <&gcc GCC_PCIE_BCR>;
reset-names = "core";
@ -613,6 +614,8 @@
iommus = <&apps_smmu 0x1a0 0x0>;
snps,dis_u2_susphy_quirk;
snps,dis_enblslpm_quirk;
snps,dis-u1-entry-quirk;
snps,dis-u2-entry-quirk;
phys = <&usb_hsphy>, <&usb_qmpphy>;
phy-names = "usb2-phy", "usb3-phy";
};

View File

@ -335,6 +335,10 @@
<GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "global", "doorbell";
interconnects = <&system_noc MASTER_PCIE_0 &mc_virt SLAVE_EBI1>,
<&mem_noc MASTER_APPSS_PROC &system_noc SLAVE_PCIE_0>;
interconnect-names = "pcie-mem", "cpu-pcie";
resets = <&gcc GCC_PCIE_BCR>;
reset-names = "core";
@ -526,6 +530,8 @@
iommus = <&apps_smmu 0x1a0 0x0>;
snps,dis_u2_susphy_quirk;
snps,dis_enblslpm_quirk;
snps,dis-u1-entry-quirk;
snps,dis-u2-entry-quirk;
phys = <&usb_hsphy>, <&usb_qmpphy>;
phy-names = "usb2-phy", "usb3-phy";
};

View File

@ -238,6 +238,8 @@
<GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "error", "rx", "tx";
clocks = <&mstp10_clks R7S72100_CLK_SPI0>;
dmas = <&dmac 0x2d21>, <&dmac 0x2d22>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
num-cs = <1>;
#address-cells = <1>;
@ -253,6 +255,8 @@
<GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "error", "rx", "tx";
clocks = <&mstp10_clks R7S72100_CLK_SPI1>;
dmas = <&dmac 0x2d25>, <&dmac 0x2d26>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
num-cs = <1>;
#address-cells = <1>;
@ -268,6 +272,8 @@
<GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "error", "rx", "tx";
clocks = <&mstp10_clks R7S72100_CLK_SPI2>;
dmas = <&dmac 0x2d29>, <&dmac 0x2d2a>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
num-cs = <1>;
#address-cells = <1>;
@ -283,6 +289,8 @@
<GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "error", "rx", "tx";
clocks = <&mstp10_clks R7S72100_CLK_SPI3>;
dmas = <&dmac 0x2d2d>, <&dmac 0x2d2e>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
num-cs = <1>;
#address-cells = <1>;
@ -298,6 +306,8 @@
<GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "error", "rx", "tx";
clocks = <&mstp10_clks R7S72100_CLK_SPI4>;
dmas = <&dmac 0x2d31>, <&dmac 0x2d32>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
num-cs = <1>;
#address-cells = <1>;

View File

@ -300,12 +300,31 @@
regulator-max-microvolt = <2800000>;
};
earmic_bias_reg: voltage-regulator-6 {
compatible = "regulator-fixed";
regulator-name = "EAR_MICBIAS_LDO_2.8V";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
gpio = <&gpm0 0 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
sound: sound {
compatible = "samsung,midas-audio";
model = "TAB3";
mic-bias-supply = <&mic_bias_reg>;
submic-bias-supply = <&submic_bias_reg>;
lineout-sel-gpios = <&gpj1 2 GPIO_ACTIVE_HIGH>;
headset-mic-bias-supply = <&earmic_bias_reg>;
headset-detect-gpios = <&gpx0 4 GPIO_ACTIVE_LOW>;
headset-key-gpios = <&gpx3 6 GPIO_ACTIVE_LOW>;
samsung,headset-4pole-threshold-microvolt = <710 2000>;
samsung,headset-button-threshold-microvolt = <0 130 260>;
io-channel-names = "headset-detect";
io-channels = <&adc 0>;
audio-routing = "HP", "HPOUT1L",
"HP", "HPOUT1R",
@ -351,6 +370,11 @@
};
};
&adc {
vdd-supply = <&ldo3_reg>;
status = "okay";
};
&bus_acp {
devfreq = <&bus_dmc>;
status = "okay";
@ -511,12 +535,11 @@
wm1811: audio-codec@1a {
compatible = "wlf,wm1811";
reg = <0x1a>;
clocks = <&pmu_system_controller 0>;
clock-names = "MCLK1";
clocks = <&pmu_system_controller 0>,
<&s5m8767_osc S2MPS11_CLK_BT>;
clock-names = "MCLK1", "MCLK2";
interrupt-controller;
#interrupt-cells = <2>;
interrupt-parent = <&gpx3>;
interrupts = <6 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
#gpio-cells = <2>;

View File

@ -39,6 +39,7 @@ dtb-$(CONFIG_ARCH_STM32) += \
stm32mp151c-mect1s.dtb \
stm32mp153c-dhcom-drc02.dtb \
stm32mp153c-dhcor-drc-compact.dtb \
stm32mp153c-lxa-tac-gen3.dtb \
stm32mp153c-mecio1r1.dtb \
stm32mp157a-avenger96.dtb \
stm32mp157a-dhcor-avenger96.dtb \

View File

@ -206,5 +206,9 @@
sata1: sata@9b28000 {
status = "okay";
};
gpu: gpu@9f00000 {
status = "okay";
};
};
};

View File

@ -285,5 +285,39 @@
resets = <&softreset STIH407_LPM_SOFTRESET>;
hdmi-phandle = <&sti_hdmi>;
};
gpu: gpu@9f00000 {
compatible = "st,stih410-mali", "arm,mali-400";
reg = <0x9f00000 0x10000>;
/* LIMA driver needs 2 clocks, use the same for both */
clocks = <&clk_s_c0_flexgen CLK_ICN_GPU>,
<&clk_s_c0_flexgen CLK_ICN_GPU>;
clock-names = "bus", "core";
assigned-clocks = <&clk_s_c0_flexgen CLK_ICN_GPU>;
assigned-clock-rates = <400000000>;
resets = <&softreset STIH407_GPU_SOFTRESET>;
interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "gp",
"gpmmu",
"pp0",
"ppmmu0",
"pp1",
"ppmmu1",
"pp2",
"ppmmu2",
"pp3",
"ppmmu3";
status = "disabled";
};
};
};

View File

@ -261,6 +261,11 @@
dma-names = "up";
status = "disabled";
counter {
compatible = "st,stm32-timer-counter";
status = "disabled";
};
timer@5 {
compatible = "st,stm32h7-timer-trigger";
reg = <5>;
@ -281,6 +286,11 @@
dma-names = "up";
status = "disabled";
counter {
compatible = "st,stm32-timer-counter";
status = "disabled";
};
timer@6 {
compatible = "st,stm32h7-timer-trigger";
reg = <6>;
@ -1196,6 +1206,11 @@
access-controllers = <&etzpc 23>;
status = "disabled";
counter {
compatible = "st,stm32-timer-counter";
status = "disabled";
};
pwm {
compatible = "st,stm32-pwm";
#pwm-cells = <3>;
@ -1221,6 +1236,11 @@
access-controllers = <&etzpc 24>;
status = "disabled";
counter {
compatible = "st,stm32-timer-counter";
status = "disabled";
};
pwm {
compatible = "st,stm32-pwm";
#pwm-cells = <3>;
@ -1246,6 +1266,11 @@
access-controllers = <&etzpc 25>;
status = "disabled";
counter {
compatible = "st,stm32-timer-counter";
status = "disabled";
};
pwm {
compatible = "st,stm32-pwm";
#pwm-cells = <3>;
@ -1276,6 +1301,11 @@
access-controllers = <&etzpc 26>;
status = "disabled";
counter {
compatible = "st,stm32-timer-counter";
status = "disabled";
};
pwm {
compatible = "st,stm32-pwm";
#pwm-cells = <3>;
@ -1304,6 +1334,11 @@
access-controllers = <&etzpc 27>;
status = "disabled";
counter {
compatible = "st,stm32-timer-counter";
status = "disabled";
};
pwm {
compatible = "st,stm32-pwm";
#pwm-cells = <3>;
@ -1332,6 +1367,11 @@
access-controllers = <&etzpc 28>;
status = "disabled";
counter {
compatible = "st,stm32-timer-counter";
status = "disabled";
};
pwm {
compatible = "st,stm32-pwm";
#pwm-cells = <3>;

View File

@ -440,6 +440,9 @@
/delete-property/dmas;
/delete-property/dma-names;
status = "disabled";
counter {
status = "okay";
};
pwm {
/* PWM output on pin 7 of the expansion connector (CN8.7) using TIM3_CH4 func */
pinctrl-0 = <&pwm3_pins_a>;
@ -456,6 +459,9 @@
/delete-property/dmas;
/delete-property/dma-names;
status = "disabled";
counter {
status = "okay";
};
pwm {
/* PWM output on pin 31 of the expansion connector (CN8.31) using TIM4_CH2 func */
pinctrl-0 = <&pwm4_pins_a>;
@ -472,6 +478,9 @@
/delete-property/dmas;
/delete-property/dma-names;
status = "disabled";
counter {
status = "okay";
};
pwm {
/* PWM output on pin 32 of the expansion connector (CN8.32) using TIM8_CH3 func */
pinctrl-0 = <&pwm8_pins_a>;
@ -486,6 +495,9 @@
&timers14 {
status = "disabled";
counter {
status = "okay";
};
pwm {
/* PWM output on pin 33 of the expansion connector (CN8.33) using TIM14_CH1 func */
pinctrl-0 = <&pwm14_pins_a>;

View File

@ -85,8 +85,8 @@
vddcpu: buck1 { /* VDD_CPU_1V2 */
regulator-name = "vddcpu";
regulator-min-microvolt = <1250000>;
regulator-max-microvolt = <1250000>;
regulator-min-microvolt = <1350000>;
regulator-max-microvolt = <1350000>;
regulator-always-on;
regulator-initial-mode = <0>;
regulator-over-current-protection;
@ -201,17 +201,17 @@
pagesize = <64>;
};
eeprom0wl: eeprom@58 {
compatible = "st,24256e-wl"; /* ST M24256E WL page of 0x50 */
pagesize = <64>;
reg = <0x58>;
};
rv3032: rtc@51 {
compatible = "microcrystal,rv3032";
reg = <0x51>;
interrupts-extended = <&gpioi 0 IRQ_TYPE_EDGE_FALLING>;
};
eeprom0wl: eeprom@58 {
compatible = "st,24256e-wl"; /* ST M24256E WL page of 0x50 */
pagesize = <64>;
reg = <0x58>;
};
};
&iwdg2 {

View File

@ -129,7 +129,7 @@
reg = <0x4c001000 0x400>;
st,proc-id = <0>;
interrupts-extended =
<&exti 61 1>,
<&exti 61 IRQ_TYPE_LEVEL_HIGH>,
<&intc GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "rx", "tx";
clocks = <&rcc IPCC>;
@ -578,6 +578,11 @@
access-controllers = <&etzpc 20>;
status = "disabled";
counter {
compatible = "st,stm32-timer-counter";
status = "disabled";
};
timer@5 {
compatible = "st,stm32h7-timer-trigger";
reg = <5>;
@ -599,6 +604,11 @@
access-controllers = <&etzpc 21>;
status = "disabled";
counter {
compatible = "st,stm32-timer-counter";
status = "disabled";
};
timer@6 {
compatible = "st,stm32h7-timer-trigger";
reg = <6>;
@ -618,6 +628,11 @@
access-controllers = <&etzpc 22>;
status = "disabled";
counter {
compatible = "st,stm32-timer-counter";
status = "disabled";
};
pwm {
compatible = "st,stm32-pwm";
#pwm-cells = <3>;
@ -643,6 +658,11 @@
access-controllers = <&etzpc 23>;
status = "disabled";
counter {
compatible = "st,stm32-timer-counter";
status = "disabled";
};
pwm {
compatible = "st,stm32-pwm";
#pwm-cells = <3>;
@ -668,6 +688,11 @@
access-controllers = <&etzpc 24>;
status = "disabled";
counter {
compatible = "st,stm32-timer-counter";
status = "disabled";
};
pwm {
compatible = "st,stm32-pwm";
#pwm-cells = <3>;
@ -1116,6 +1141,11 @@
access-controllers = <&etzpc 54>;
status = "disabled";
counter {
compatible = "st,stm32-timer-counter";
status = "disabled";
};
pwm {
compatible = "st,stm32-pwm";
#pwm-cells = <3>;
@ -1144,11 +1174,17 @@
access-controllers = <&etzpc 55>;
status = "disabled";
counter {
compatible = "st,stm32-timer-counter";
status = "disabled";
};
pwm {
compatible = "st,stm32-pwm";
#pwm-cells = <3>;
status = "disabled";
};
timer@15 {
compatible = "st,stm32h7-timer-trigger";
reg = <15>;
@ -1171,6 +1207,11 @@
access-controllers = <&etzpc 56>;
status = "disabled";
counter {
compatible = "st,stm32-timer-counter";
status = "disabled";
};
pwm {
compatible = "st,stm32-pwm";
#pwm-cells = <3>;

Some files were not shown because too many files have changed in this diff Show More