dummy/linux-stable-mirror
1
0
Fork 1
mirror of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ synced 2025-04-19 20:58:31 +09:00
Code Issues Packages Projects Releases Wiki Activity

ALSA: doc: cs35l56: Add information about Cirrus Logic CS35L54/56/57

Browse Source 
Add documentation for the Cirrus Logic CS35L54/56/57 amps, which are
all managed by the cs35l56 drivers.

The aim and scope of this documentation is to provide troubleshooting
information for end-users.

Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20250108141045.1032-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This commit is contained in:
Richard Fitzgerald 2025-01-08 14:10:45 +00:00 committed by Mark Brown
parent 704dbe97a6
commit 088fb4ee17
No known key found for this signature in database
GPG Key ID: 24D68B725D5487D0
3 changed files with 302 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

292
Documentation/sound/codecs/cs35l56.rst Normal file
View File

@ -0,0 +1,292 @@
.. SPDX-License-Identifier: GPL-2.0-only
=====================================================================
Audio drivers for Cirrus Logic CS35L54/56/57 Boosted Smart Amplifiers
=====================================================================
:Copyright: 2025 Cirrus Logic, Inc. and
Cirrus Logic International Semiconductor Ltd.
Contact: patches@opensource.cirrus.com
Summary
=======
The high-level summary of this document is:
**If you have a laptop that uses CS35L54/56/57 amplifiers but audio is not
working, DO NOT ATTEMPT TO USE FIRMWARE AND SETTINGS FROM ANOTHER LAPTOP,
EVEN IF THAT LAPTOP SEEMS SIMILAR.**
The CS35L54/56/57 amplifiers must be correctly configured for the power
supply voltage, speaker impedance, maximum speaker voltage/current, and
other external hardware connections.
The amplifiers feature advanced boost technology that increases the voltage
used to drive the speakers, while proprietary speaker protection algorithms
allow these boosted amplifiers to push the limits of the speakers without
causing damage. These **must** be configured correctly.
Supported Cirrus Logic amplifiers
---------------------------------
The cs35l56 drivers support:
* CS35L54
* CS35L56
* CS35L57
There are two drivers in the kernel
*For systems using SoundWire*: sound/soc/codecs/cs35l56.c and associated files
*For systems using HDA*: sound/pci/hda/cs35l56_hda.c
Firmware
========
The amplifier is controlled and managed by firmware running on the internal
DSP. Firmware files are essential to enable the full capabilities of the
amplifier.
Firmware is distributed in the linux-firmware repository:
https://gitlab.com/kernel-firmware/linux-firmware.git
On most SoundWire systems the amplifier has a default minimum capability to
produce audio. However this will be
* at low volume, to protect the speakers, since the speaker specifications
and power supply voltages are unknown.
* a mono mix of left and right channels.
On some SoundWire systems that have both CS42L43 and CS35L56/57 the CS35L56/57
receive their audio from the CS42L43 instead of directly from the host
SoundWire interface. These systems can be identified by the CS42L43 showing
in dmesg as a SoundWire device, but the CS35L56/57 as SPI. On these systems
the firmware is *mandatory* to enable receiving the audio from the CS42L43.
On HDA systems the firmware is *mandatory* to enable HDA bridge mode. There
will not be any audio from the amplifiers without firmware.
Cirrus Logic firmware files
---------------------------
Each amplifier requires two firmware files. One file has a .wmfw suffix, the
other has a .bin suffix.
The firmware is customized by the OEM to match the hardware of each laptop,
and the firmware is specific to that laptop. Because of this, there are many
firmware files in linux-firmware for these amplifiers. Firmware files are
**not interchangeable between laptops**.
Cirrus Logic submits files for known laptops to the upstream linux-firmware
repository. Providing Cirrus Logic is aware of a particular laptop and has
permission from the manufacturer to publish the firmware, it will be pushed
to linux-firmware. You may need to upgrade to a newer release of
linux-firmware to obtain the firmware for your laptop.
**Important:** the Makefile for linux-firmware creates symlinks that are listed
in the WHENCE file. These symlinks are required for the CS35L56 driver to be
able to load the firmware.
How do I know which firmware file I should have?
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
All firmware file names are qualified with a unique "system ID". On normal
x86 PCs with PCI audio this is the Vendor Subsystem ID (SSID) of the host
PCI audio interface.
The SSID can be viewed using the lspci tool::
lspci -v -nn | grep -A2 -i audio
0000:00:1f.3 Audio device [0403]: Intel Corporation Meteor Lake-P HD Audio Controller [8086:7e28]
Subsystem: Dell Meteor Lake-P HD Audio Controller [1028:0c63]
In this example the SSID is 10280c63.
The format of the firmware file names is:
cs35lxx-b0-dsp1-misc-SSID[-spkidX]-ampN
Where:
* cs35lxx-b0 is the amplifier model and silicon revision. This information
is logged by the driver during initialization.
* SSID is the 8-digit hexadecimal SSID value.
* ampN is the amplifier number (for example amp1). This is the same as
the prefix on the ALSA control names except that it is always lower-case
in the file name.
* spkidX is an optional part, used for laptops that have firmware
configurations for different makes and models of internal speakers.
Sound Open Firmware and ALSA topology files
-------------------------------------------
All SoundWire systems will require a Sound Open Firmware (SOF) for the
host CPU audio DSP, together with an ALSA topology file (.tplg).
The SOF firmware will usually be provided by the manufacturer of the host
CPU (i.e. Intel or AMD). The .tplg file is normally part of the SOF firmware
release.
SOF binary builds are available from: https://github.com/thesofproject/sof-bin/releases
The main SOF source is here: https://github.com/thesofproject
ALSA-ucm configurations
-----------------------
Typically an appropriate ALSA-ucm configuration file is needed for
use-case managers and audio servers such as PipeWire.
Configuration files are available from the alsa-ucm-conf repository:
https://git.alsa-project.org/?p=alsa-ucm-conf.git
Kernel log messages
===================
SoundWire
---------
A successful initialization will look like this (this will be repeated for
each amplifier)::
[ 7.568374] cs35l56 sdw:0:0:01fa:3556:01:0: supply VDD_P not found, using dummy regulator
[ 7.605208] cs35l56 sdw:0:0:01fa:3556:01:0: supply VDD_IO not found, using dummy regulator
[ 7.605313] cs35l56 sdw:0:0:01fa:3556:01:0: supply VDD_A not found, using dummy regulator
[ 7.939279] cs35l56 sdw:0:0:01fa:3556:01:0: Cirrus Logic CS35L56 Rev B0 OTP3 fw:3.4.4 (patched=0)
[ 7.947844] cs35l56 sdw:0:0:01fa:3556:01:0: Slave 4 state check1: UNATTACHED, status was 1
[ 8.740280] cs35l56 sdw:0:0:01fa:3556:01:0: supply VDD_B not found, using dummy regulator
[ 8.740552] cs35l56 sdw:0:0:01fa:3556:01:0: supply VDD_AMP not found, using dummy regulator
[ 9.242164] cs35l56 sdw:0:0:01fa:3556:01:0: DSP1: cirrus/cs35l56-b0-dsp1-misc-xxxxxxxx.wmfw: format 3 timestamp 0x66b2b872
[ 9.242173] cs35l56 sdw:0:0:01fa:3556:01:0: DSP1: cirrus/cs35l56-b0-dsp1-misc-xxxxxxxx.wmfw: Tue 05 Dec 2023 21:37:21 GMT Standard Time
[ 9.991709] cs35l56 sdw:0:0:01fa:3556:01:0: DSP1: Firmware: 1a00d6 vendor: 0x2 v3.11.23, 41 algorithms
[10.039098] cs35l56 sdw:0:0:01fa:3556:01:0: DSP1: cirrus/cs35l56-b0-dsp1-misc-xxxxxxxx-amp1.bin: v3.11.23
[10.879235] cs35l56 sdw:0:0:01fa:3556:01:0: Slave 4 state check1: UNATTACHED, status was 1
[11.401536] cs35l56 sdw:0:0:01fa:3556:01:0: Calibration applied
HDA
---
A successful initialization will look like this (this will be repeated for
each amplifier)::
[ 6.306475] cs35l56-hda i2c-CSC3556:00-cs35l56-hda.0: Cirrus Logic CS35L56 Rev B0 OTP3 fw:3.4.4 (patched=0)
[ 6.613892] cs35l56-hda i2c-CSC3556:00-cs35l56-hda.0: DSP system name: 'xxxxxxxx', amp name: 'AMP1'
[ 8.266660] snd_hda_codec_cs8409 ehdaudio0D0: bound i2c-CSC3556:00-cs35l56-hda.0 (ops cs35l56_hda_comp_ops [snd_hda_scodec_cs35l56])
[ 8.287525] cs35l56-hda i2c-CSC3556:00-cs35l56-hda.0: DSP1: cirrus/cs35l56-b0-dsp1-misc-xxxxxxxx.wmfw: format 3 timestamp 0x66b2b872
[ 8.287528] cs35l56-hda i2c-CSC3556:00-cs35l56-hda.0: DSP1: cirrus/cs35l56-b0-dsp1-misc-xxxxxxxx.wmfw: Tue 05 Dec 2023 21:37:21 GMT Standard Time
[ 9.984335] cs35l56-hda i2c-CSC3556:00-cs35l56-hda.0: DSP1: Firmware: 1a00d6 vendor: 0x2 v3.11.23, 41 algorithms
[10.085797] cs35l56-hda i2c-CSC3556:00-cs35l56-hda.0: DSP1: cirrus/cs35l56-b0-dsp1-misc-xxxxxxxx-amp1.bin: v3.11.23
[10.655237] cs35l56-hda i2c-CSC3556:00-cs35l56-hda.0: Calibration applied
Important messages
~~~~~~~~~~~~~~~~~~
Cirrus Logic CS35L56 Rev B0 OTP3 fw:3.4.4 (patched=0)
Shows that the driver has been able to read device ID registers from the
amplifier.
* The actual amplifier type and silicon revision (CS35L56 B0 in this
example) is shown, as read from the amplifier identification registers.
* (patched=0) is normal, and indicates that the amplifier has been hard
reset and is running default ROM firmware.
* (patched=1) means that something has previously downloaded firmware
to the amplifier and the driver does not have control of the RESET
signal to be able to replace this preloaded firmware. This is normal
for systems where the BIOS downloads firmware to the amplifiers
before OS boot.
This status can also be seen if the cs35l56 kernel module is unloaded
and reloaded on a system where the driver does not have control of
RESET. SoundWire systems typically do not give the driver control of
RESET and only a BIOS (re)boot can reset the amplifiers.
DSP1: cirrus/cs35l56-b0-dsp1-misc-xxxxxxxx.wmfw
Shows that a .wmfw firmware file was found and downloaded.
DSP1: cirrus/cs35l56-b0-dsp1-misc-xxxxxxxx-amp1.bin
Shows that a .bin firmware file was found and downloaded.
Calibration applied
Factory calibration data in EFI was written to the amplifier.
Error messages
==============
This section explains some of the error messages that the driver can log.
Algorithm coefficient version %d.%d.%d but expected %d.%d.%d
The version of the .bin file content does not match the loaded firmware.
Caused by mismatched .wmfw and .bin file, or .bin file was found but
.wmfw was not.
No %s for algorithm %x
The version of the .bin file content does not match the loaded firmware.
Caused by mismatched .wmfw and .bin file, or .bin file was found but
.wmfw was not.
.bin file required but not found
HDA driver did not find a .bin file that matches this hardware.
Calibration disabled due to missing firmware controls
Driver was not able to write EFI calibration data to firmware registers.
This typically means that either:
* The driver did not find a suitable wmfw for this hardware, or
* The amplifier has already been patched with firmware by something
previously, and the driver does not have control of a hard RESET line
to be able to reset the amplifier and download the firmware files it
found. This situation is indicated by the device identification
string in the kernel log shows "(patched=1)"
Failed to write calibration
Same meaning and cause as "Calibration disabled due to missing firmware
controls"
Failed to read calibration data from EFI
Factory calibration data in EFI is missing, empty or corrupt.
This is most likely to be cause by accidentally deleting the file from
the EFI filesystem.
No calibration for silicon ID
The factory calibration data in EFI does not match this hardware.
The most likely cause is that an amplifier has been replaced on the
motherboard without going through manufacturer calibration process to
generate calibration data for the new amplifier.
Did not find any buses for CSCxxxx
Only on HDA systems. The HDA codec driver found an ACPI entry for
Cirrus Logic companion amps, but could not enumerate the ACPI entries for
the I2C/SPI buses. The most likely cause of this is that:
* The relevant bus driver (I2C or SPI) is not part of the kernel.
* The HDA codec driver was built-in to the kernel but the I2C/SPI
bus driver is a module and so the HDA codec driver cannot call the
bus driver functions.
init_completion timed out
The SoundWire bus controller (host end) did not enumerate the amplifier.
In other words, the ACPI says there is an amplifier but for some reason
it was not detected on the bus.
No AF01 node
Indicates an error in ACPI. A SoundWire system should have a Device()
node named "AF01" but it was not found.
Failed to get spk-id-gpios
ACPI says that the driver should request a GPIO but the driver was not
able to get that GPIO. The most likely cause is that the kernel does not
include the correct GPIO or PINCTRL driver for this system.
Failed to read spk-id
ACPI says that the driver should request a GPIO but the driver was not
able to read that GPIO.
Unexpected spk-id element count
AF01 contains more speaker ID GPIO entries than the driver supports
Overtemp error
Amplifier overheat protection was triggered and the amplifier shut down
to protect itself.
Amp short error
Amplifier detected a short-circuit on the speaker output pins and shut
down for protection. This would normally indicate a damaged speaker.
Hibernate wake failed
The driver tried to wake the amplifier from its power-saving state but
did not see the expected responses from the amplifier. This can be caused
by using firmware that does not match the hardware.

9
Documentation/sound/codecs/index.rst Normal file
View File

@ -0,0 +1,9 @@
.. SPDX-License-Identifier: GPL-2.0
Codec-Specific Information
==========================
.. toctree::
:maxdepth: 2
cs35l56

1
MAINTAINERS
View File

@ -5469,6 +5469,7 @@ L: linux-sound@vger.kernel.org
L: patches@opensource.cirrus.com
S: Maintained
F: Documentation/devicetree/bindings/sound/cirrus,cs*
F: Documentation/sound/codecs/cs*
F: drivers/mfd/cs42l43*
F: drivers/pinctrl/cirrus/pinctrl-cs42l43*
F: drivers/spi/spi-cs42l43*